Browse
Submit Data
Databases
API
Help

Dataset Information

8 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Stress concentration in periodically rough Hertzian contact: Hertz to soft-flat-punch transition.

ABSTRACT: We report on the elastic contact between a spherical lens and a patterned substrate, composed of a hexagonal lattice of cylindrical pillars. The stress field and the size of the contact area are obtained by means of numerical methods: a superposition method of discrete pressure elements and an iterative bisection-like method. For small indentations, a transition from a Hertzian to a soft-flat-punch behaviour is observed when the surface fraction of the substrate that is covered by the pillars is increased. In particular, we present a master curve defined by two dimensionless parameters, which allows one to predict the stress at the centre of the contact region in terms of the surface fraction occupied by pillars. The transition between the limiting contact regimes, Hertzian and soft-flat-punch, is well described by a rational function. Additionally, a simple model to describe the Boussinesq-Cerruti-like contact between the lens and a single elastic pillar, which takes into account the pillar geometry and the elastic properties of the two bodies, is presented.

SUBMITTER: Ledesma-Alonso R

PROVIDER: S-EPMC5046983 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Adhesive contact of rough brushes.

Project description:The adhesive contact between a rough brush-like structure and an elastic half-space is numerically simulated using the fast Fourier transform (FFT)-based boundary element method and the mesh-dependent detachment criterion of Pohrt and Popov. The problem is of interest in light of the discussion of the role of contact splitting in the adhesion strength of gecko feet and structured biomimetic materials. For rigid brushes, the contact splitting does not enhance adhesion even if all pillars of the brush are positioned at the same height. Introducing statistical scatter of height leads to a further decrease of the maximum adhesive strength. At the same time, the pull-off force becomes dependent on the previously applied compression force and disappears completely at some critical roughness. For roughness with a subcritical value, the pressure dependence of the pull-off force qualitatively follows the known theory of Fuller and Tabor with moderate modification due to finite size effect of the brush.

| S-EPMC6142746 | biostudies-other

Contact stiffness of randomly rough surfaces.

Project description:We investigate the contact stiffness of an elastic half-space and a rigid indenter with randomly rough surface having a power spectrum C2D(q)proportional q(-2H-2), where q is the wave vector. The range of H[symbol: see text] is studied covering a wide range of roughness types from white noise to smooth single asperities. At low forces, the contact stiffness is in all cases a power law function of the normal force with an exponent α. For H > 2, the simple Hertzian behavior is observed . In the range of 0 < H < 2, the Pohrt-Popov behavior is valid (). For H < 0, a power law with a constant power of approximately 0.9 is observed, while the exact value depends on the number of modes used to produce the rough surface. Interpretation of the three regions is given both in the frame of the three dimensional contact mechanics and the method of dimensionality reduction (MDR). The influence of the long wavelength roll-off is investigated and discussed.

| S-EPMC3836042 | biostudies-other

Flat acoustics with soft gradient-index metasurfaces.

Project description:Recently, metasurfaces have been proven to be effective and compact devices for the design of arbitrary wavefronts. Metasurfaces are planar metamaterials with a subwavelength thickness that allows wavefront shaping by introducing in-plane variations, namely, gradients, in the spatial wave response of these flat structures. Here we report a new class of acoustic gradient-index (GRIN) metasurfaces engineered from soft graded-porous silicone rubber with a high acoustic index for broadband ultrasonic three-dimensional wavefront shaping in water. The functionalities of these soft flat lenses are illustrated through various experiments, which demonstrate beam steering and beam focusing, as well as vortex beam generation in free space. These new GRIN metasurfaces may have important applications in various domains using designed ultrasonic fields (biomedical imaging, industrial non-destructive testing, contactless particle manipulation), since their fabrication is very straightforward with common polymer science engineering.

| S-EPMC6329837 | biostudies-other

Contact between rough surfaces and a criterion for macroscopic adhesion.

Project description:At the molecular scale, there are strong attractive interactions between surfaces, yet few macroscopic surfaces are sticky. Extensive simulations of contact by adhesive surfaces with roughness on nanometer to micrometer scales are used to determine how roughness reduces the area where atoms contact and thus weakens adhesion. The material properties, adhesive strength, and roughness parameters are varied by orders of magnitude. In all cases, the area of atomic contact is initially proportional to the load. The prefactor rises linearly with adhesive strength for weak attractions. Above a threshold adhesive strength, the prefactor changes sign, the surfaces become sticky, and a finite force is required to separate them. A parameter-free analytic theory is presented that describes changes in these numerical results over up to five orders of magnitude in load. It relates the threshold adhesive strength to roughness and material properties, explaining why most macroscopic surfaces do not stick. The numerical results are qualitatively and quantitatively inconsistent with classical theories based on the Greenwood-Williamson approach that neglect the range of adhesion and do not include asperity interactions.

| S-EPMC3948287 | biostudies-literature

Load-separation curves for the contact of self-affine rough surfaces.

Project description:There are two main approximate theories in the contact of rough solids: Greenwood-Williamson asperity theories (GW) and Persson theories. Neither of them has been fully assessed so far with respect to load-separation curves. Focusing on the most important case of low fractal dimension (D f ?=?2.2) with extensive numerical studies we find that: (i) Persson's theory describes well the regime of intermediate pressures/contact area, but requires significant corrective factors: the latter depend also on upper wavevector cutoff of the roughness; hence, (ii) Persson's theory does not predict the correct functional dependence on magnification; (iii) asperity theories in the discrete version even neglecting interaction effects are more appropriate in the range of relatively large separations, also to take into consideration of the large scatter in actual realization of the surface.

| S-EPMC5537336 | biostudies-literature

Research on the Micro Sheet Stamping Process Using Plasticine as Soft Punch.

Project description:Plasticine is widely used in the analysis of metal forming processes, due to its excellent material flow ability. In this study, plasticine is used as the soft punch to fabricate array micro-channels on metal sheet in the micro sheet stamping process. This is because plasticine can produce a large material flow after being subjected to force and through the material flow, the plasticine can cause the sheet to fill into the micro-channels of the rigid die, leading to the generation of micro-channels in the sheet. The distribution of array micro-channels was investigated as well as the influence of load forces on the sheet deformations. It was found that the depth of micro-channels increases as the load force increases. When the load force reaches a certain level, a crack can be observed. The micro sheet stamping process was also investigated by the method of numerical simulation. The obtained experimental and numerical results for the stamping process showed that they were in good agreement. Additionally, from the simulation results, it can be seen that the corner region of the micro-channel-shape work piece has a risk to crack due to the existence of maximum von Mises stress and significant thinning.

| S-EPMC5455939 | biostudies-other

Transition of dislocation nucleation induced by local stress concentration in nanotwinned copper.

Project description:Metals with a high density of nanometre-scale twins have demonstrated simultaneous high strength and good ductility, attributed to the interaction between lattice dislocations and twin boundaries. Maximum strength was observed at a critical twin lamella spacing (∼15 nm) by mechanical testing; hence, an explanation of how twin lamella spacing influences dislocation behaviours is desired. Here, we report a transition of dislocation nucleation from steps on the twin boundaries to twin boundary/grain boundary junctions at a critical twin lamella spacing (12-37 nm), observed with in situ transmission electron microscopy. The local stress concentrations vary significantly with twin lamella spacing, thus resulting in a critical twin lamella spacing (∼18 nm) for the transition of dislocation nucleation. This agrees quantitatively with the mechanical test. These results demonstrate that by quantitatively analysing local stress concentrations, a direct relationship can be resolved between the microscopic dislocation activities and macroscopic mechanical properties of nanotwinned metals.

| S-EPMC4518316 | biostudies-literature

Rough set soft computing cancer classification and network: one stone, two birds.

Project description:Gene expression profiling provides tremendous information to help unravel the complexity of cancer. The selection of the most informative genes from huge noise for cancer classification has taken centre stage, along with predicting the function of such identified genes and the construction of direct gene regulatory networks at different system levels with a tuneable parameter. A new study by Wang and Gotoh described a novel Variable Precision Rough Sets-rooted robust soft computing method to successfully address these problems and has yielded some new insights. The significance of this progress and its perspectives will be discussed in this article.

| S-EPMC2918355 | biostudies-literature

Two-dimensional finite element analysis of elastic adhesive contact of a rough surface.

Project description:Adhesive contact of a rigid flat surface with an elastic substrate having Weierstrass surface profile is numerically analyzed using the finite element method. In this work, we investigate the relationship between load and contact area spanning the limits of non-adhesive normal contact to adhesive contact for various substrate material properties, surface energy and roughness parameters. In the limit of non-adhesive normal contact, our results are consistent with published work. For the adhesive contact problem, we employ Lennard-Jones type local contact interaction model with numerical regularization to study the transition from partial to full contact including jump-to-contact instabilities as well as load-depth hysteresis. We have investigated evolution of bonded contact area and pull-off force for various surface roughness parameters, substrate material properties and surface energy. We have identified two non-dimensional parameters to adequately explain experimentally observed adhesion weakening and strengthening phenomena. A design chart of the relative pull-off force as function of non-dimensional parameters is also presented.

| S-EPMC7096536 | biostudies-literature

Deterministic normal contact of rough surfaces with adhesion using a surface integral method.

Project description:The fundamental problem of adhesion in the presence of surface roughness and its effect on the prediction of friction has been a hot topic for decades in numerous areas of science and engineering, attracting even more attention in recent years in areas such as geotechnics and tectonics, nanotechnology, high-value manufacturing and biomechanics. In this paper a new model for deterministic calculation of the contact mechanics for rough surfaces in the presence of adhesion is presented. The contact solver is an in-house boundary element method that incorporates fast Fourier transform for numerical efficiency. The adhesive contact model considers full Lennard-Jones potentials and surface integration at the asperity level and is validated against models in the literature. Finally, the effect of surface roughness on the adhesion between surfaces was studied, and it was shown that the root mean square gradient of surface roughness can change the adhesive pressures irrespective of the root mean square surface roughness. We have tested two adhesion parameters based on Johnson's modified criteria and Ciavarella's model. We showed that Civarella's model introduces the most reasonable criteria suggesting that the RMS roughness and large wavelength of surfaces roughness are the important parameters of adhesion between rough surfaces.

| S-EPMC7655746 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data