Sulfur-Doped Carbon with Enlarged Interlayer Distance as a High-Performance Anode Material for Sodium-Ion Batteries.
Ontology highlight
ABSTRACT:
SUBMITTER: Qie L
PROVIDER: S-EPMC5049484 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Heteroatom doping is regarded as a promising approach to enhance the electrochemical performance of carbon materials, while the poor controllability of heteroatoms remains the main challenge. In this context, sulfur-doped graphdiyne (S-GDY) was successfully synthesized on the surface of copper foil using a sulfur-containing multi-acetylene monomer to form a uniform film. The S-GDY film possesses a porous structure and abundant sulfur atoms decorated homogeneously in the carbon skeleton, which facilitate the fast diffusion and storage of lithium ions. The lithium-ion batteries (LIBs) fabricated with S-GDY as anode exhibit excellent performance, including the high specific capacity of 920 mA h g-1 and superior rate performances. The LIBs also show long-term cycling stability under the high current density. This result could potentially provide a modular design principle for the construction of high-performance anode materials for lithium-ion batteries.
| S-EPMC8145426 | biostudies-literature
Project description:Sodium-ion batteries (SIBs) have attracted enormous attention in recent years due to the high abundance and low cost of sodium. However, in contrast to lithium-ion batteries, conventional graphite is unsuitable for SIB anodes because it is much more difficult to intercolate the larger Na ions into graphite layers. Therefore, it is critical to develop new anode materials for SIBs for practical use. Here, heteroatom-doped graphene with high doping levels and disordered structures is prepared using a simple and economical thermal process. The solvothermal-derived graphene shows excellent performance as an anode material for SIBs. It exhibits a high reversible capacity of 380 mAh g-1 after 300 cycles at 100 mA g-1, excellent rate performance 217 mAh g-1 at 3200 mA g-1, and superior cycling performance at 2.0 A g-1 during 1000 cycles with negligible capacity fade.
| S-EPMC5979751 | biostudies-literature
Project description:Large-area phosphorus-doped carbon nanosheets (P-CNSs) are first obtained from carbon dots (CDs) through self-assembly driving from thermal treatment with Na catalysis. This is the first time to realize the conversion from 0D CDs to 2D nanosheets doped with phosphorus. The sodium storage behavior of phosphorus-doped carbon material is also investigated for the first time. As anode material for sodium-ion batteries (SIBs), P-CNSs exhibit superb performances for electrochemical storage of sodium. When cycled at 0.1 A g-1, the P-CNSs electrode delivers a high reversible capacity of 328 mAh g-1, even at a high current density of 20 A g-1, a considerable capacity of 108 mAh g-1 can still be maintained. Besides, this material also shows excellent cycling stability, at a current density of 5 A g-1, the reversible capacity can still reach 149 mAh g-1 after 5000 cycles. This work will provide significant value for the development of both carbon materials and SIBs anode materials.
| S-EPMC5238737 | biostudies-literature
Project description:In this work, by density functional theory (DFT) calculations, sp-sp2-hybridized boron-doped graphdiyne (BGDY) nanosheets have been investigated as an anode material for sodium storage. The density of states (DOS) and band structure plots show that substituting a boron atom with a carbon atom in an 18-atom unit cell converts the semiconductor pristine graphdiyne (GDY) to metallic BGDY. Also, our calculations indicate that, due to the presence of boron atoms, the adsorption energy of BGDY is more than that of GDY. The diffusion energy barrier calculations show that the boron atom in BGDY creates a more suitable path with a low energy barrier for sodium movement. This parameter is important in the rate of charge/discharge process. On the other hand, the projected density of states (PDOS) plots show that sodium is ionized when adsorbed on the electrode surface and so Na-BGDY interaction has an electrostatic character. This type of interaction is necessary for the reversibility of adsorption in the discharge mechanism. Finally, the calculation of the theoretical capacity shows an increase in BGDY (872.68 mAh g-1) in comparison with that in GDY (744 mAh g-1). Thus, from comparison of different evaluated parameters, it can be concluded that BGDY is a suitable anode material for sodium-ion batteries.
| S-EPMC7203954 | biostudies-literature
Project description:Sodium ion batteries have drawn extensive attentions for large-scale energy storage to replace lithium ion batteries primarily due to the natural abundance of sodium resource and low cost, but their energy density and electrochemical performance are hindered by the sluggish diffusion kinetics of sodium ion. Herein, free-standing nitrogen-doped graphene aerogel has been fabricated via hydrothermal reaction as the potential anode material for sodium ion batteries. The three dimensional porous network structure of the graphene aerogel provides sufficient interstitial space for sodium ion accommodation, allowing fast and reversible ion intercalation/de-intercalation. The nitrogen doping could introduce defects on the graphene sheets, making the feasible transport of large-sized sodium ion. Benefiting from the effective structure and nitrogen doping, the obtained material demonstrates high reversible capacities, good cycling performance (287.9 mA h g-1 after 200 cycles at a current density of 100 mA g-1), especially superior rate capability (151.9 mA h g-1 at a high current density of 5 A g-1).
| S-EPMC5501838 | biostudies-literature
Project description:Binary mixed transition-based metal oxides have some of the most potential as anode materials for rechargeable advanced battery systems due to their high theoretical capacity and tremendous electrochemical performance. Nonetheless, binary metal oxides still endure low electronic conductivity and huge volume expansion during the charge/discharge processes. In this study, we synthesized a reduced graphene oxide (rGO)-wrapped CoV2O4 material as the anode for sodium ion batteries. The X-ray diffraction analyses revealed pure-phased CoV2O4 (CVO) rGO-wrapped CoV2O4 (CVO/rGO) nanoparticles. The capacity retention of the CVO/rGO composite anode demonstrated 81.6% at the current density of 200 mA/g for more than 1000 cycles, which was better than that of the bare one of only 73.5% retention. The as-synthesized CVO/rGO exhibited remarkable cyclic stability and rate capability. The reaction mechanism of the CoV2O4 anode with sodium ions was firstly studied in terms of cyclic voltammetry (CV) and ex situ XRD analyses. These results articulated the manner of utilizing the graphene oxide-coated spinel-based novel anode-CoV2O4 as a potential anode for sodium ion batteries.
| S-EPMC7182827 | biostudies-literature
Project description:Sodium ion batteries (SIBs) have been considered as a promising alternative to lithium ion batteries (LIBs) for large scale energy storage in the future. However, the commercial graphite anode is not suitable for SIBs because of its low Na+ ions storage capability and poor cycling stability. Recently, another alternative as anode for SIBs, amorphous carbon materials, have attracted tremendous attention because of their abundant resource, nontoxicity, and most importantly, stability. Here, N-doped hierarchical porous carbon microspheres (NHPCS) derived from Ni-MOF have been prepared and used as anode for SIBs. Benefiting from the open porous structure and expanded interlayer distance, the diffusion of Na+ is greatly facilitated and the Na+ storage capacity is significantly enhanced concurrently. The NHPCS exhibit high reversible capacity (291 mA h g-1 at current of 200 mA g-1), excellent rate performance (256 mA h g-1 at high current of 1,000 mA g-1), and outstanding cycling stability (204 mA h g-1 after 200 cycles).
| S-EPMC6834544 | biostudies-literature
Project description:New two-dimensional (2D) transition-metal borides have attracted considerable interest in research on electrode materials for Li-ion batteries (LIBs) owing to their promising properties. In this study, 2D molybdenum boride (Mo2B2) with and without transition metal (TM, TM=Mn, Fe, Co, Ni, Ru, and Pt) atom doping was investigated. Our results indicated that all TM-doped Mo2B2 samples exhibited excellent electronic conductivity, similar to the intrinsic 2D Mo2B2 metal behavior, which is highly beneficial for application in LIBs. Moreover, we found that the diffusion energy barriers of Li along paths 1 and 2 for all TM-doped Mo2B2 samples are smaller than 0.30 and 0.24 eV of the pristine Mo2B2. In particular, for 2D Co-doped Mo2B2, the diffusion energy barriers of Li along paths 1 and 2 are reduced to 0.14 and 0.11 eV, respectively, making them the lowest Li diffusion barriers in both paths 1 and 2. This indicates that TM doping can improve the electrochemical performance of 2D Mo2B2 and that Co-doped Mo2B2 is a promising electrode material for LIBs. Our work not only identifies electrode materials with promising electrochemical performance but also provides guidance for the design of high-performance electrode materials for LIBs.
| S-EPMC11319228 | biostudies-literature
Project description:Graphite is currently utilized as anode materials for Li-ion batteries, but it is well-known that graphite does not show good electrochemical performances as the anode material for sodium-ion batteries (SIBs). It was also reported that the low electrochemical performances of graphite originated from the larger ionic radius of the sodium ion due to the required higher strain energy for sodium-ion intercalation into graphite leading to an unstable sodium-ion intercalated graphite intercalation compound (GIC). In this work, using first-principles calculations, we introduce pillaring effects of Na n X (n = 3 and 4; X = F, Cl, or Br) halide clusters in GICs, which become electrochemically active for Na redox reactions. Specifically, to enable sodium-ion intercalation into graphite, the interlayer spacing of graphite is required to increase over 3.9 Å, and Na n X halide cluster GICs maintain an expanded interlayer spacing of >3.9 Å. This enlarged interlayer spacing of Na n X halide cluster GICs facilitates stable intercalation of sodium ions. Na3F, Na4Cl, and Na4Br halide clusters are identified as suitable pillar candidates for anode materials because they not only expand the interlayer spacing but also provide reasonable binding energy for intercalated sodium ions for reversible deintercalation. Based on the model analysis, theoretical capacities of Na3F, Na4Cl, and Na4Br halide cluster GICs are estimated respectively to be 186, 155, and 155 mA h g-1. These predictions would provide a rational strategy guiding the search for promising anode materials for SIBs.
| S-EPMC8047692 | biostudies-literature
Project description:A sulfur doping strategy has been frequently used to improve the sodium storage specific capacity and rate capacity of hard carbon. However, some hard carbon materials have difficulty in preventing the shuttling effect of electrochemical products of sulfur molecules stored in the porous structure of hard carbon, resulting in the poor cycling stability of electrode materials. Here, a multifunctional coating is introduced to comprehensively improve the sodium storage performance of a sulfur-containing carbon-based anode. The physical barrier effect and chemical anchoring effect contributed by the abundant C-S/C-N polarized covalent bond of the N, S-codoped coating (NSC) combine to protect SGCS@NSC from the shuttling effect of soluble polysulfide intermediates. Additionally, the NSC layer can encapsulate the highly dispersed carbon spheres inside a cross-linked three-dimensional conductive network, improving the electrochemical kinetic of the SGCS@NSC electrode. Benefiting from the multifunctional coating, SGCS@NSC exhibits a high capacity of 609 mAh g-1 at 0.1 A g-1 and 249 mAh g-1 at 6.4 A g-1. Furthermore, the capacity retention of SGCS@NSC is 17.6% higher than that of the uncoated one after 200 cycles at 0.5 A g-1.
| S-EPMC10142203 | biostudies-literature