Browse
Submit Data
Databases
API
Help

Dataset Information

16 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Peripheral Hole Acceptor Moieties on an Organic Dye Improve Dye-Sensitized Solar Cell Performance.

ABSTRACT: Investigation of charge transfer dynamics in dye-sensitized solar cells is of fundamental interest and the control of these dynamics is a key factor for developing more efficient solar cell devices. One possibility for attenuating losses through recombination between injected electrons and oxidized dye molecules is to move the positive charge further away from the metal oxide surface. For this purpose, a metal-free dye named E6 is developed, in which the chromophore core is tethered to two external triphenylamine (TPA) units. After photoinduced electron injection into TiO₂, the remaining hole is rapidly transferred to a peripheral TPA unit. Electron-hole recombination is slowed down by 30% compared to a reference dye without peripheral TPA units. Furthermore, it is found that the added TPA moieties improve the electron blocking effect of the dye, retarding recombination of electrons from TiO₂ to the cobalt-based electrolyte.

SUBMITTER: Hao Y

PROVIDER: S-EPMC5049646 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Enhancement of p-type dye-sensitized solar cell performance by supramolecular assembly of electron donor and acceptor.

Project description:Supramolecular interactions based on porphyrin and fullerene derivatives were successfully adopted to improve the photovoltaic performance of p-type dye-sensitized solar cells (DSCs). Photoelectron spectroscopy (PES) measurements suggest a change in binding configuration of ZnTCPP after co-sensitization with C60PPy, which could be ascribed to supramolecular interaction between ZnTCPP and C60PPy. The performance of the ZnTCPP/C60PPy-based p-type DSC has been increased by a factor of 4 in comparison with the DSC with the ZnTCPP alone. At 560?nm, the IPCE value of DSCs based on ZnTCPP/C60PPy was a factor of 10 greater than that generated by ZnTCPP-based DSCs. The influence of different electrolytes on charge extraction and electron lifetime was investigated and showed that the enhanced Voc from the Co(2+/3+)(dtbp)3-based device is due to the positive EF shift of NiO.

| S-EPMC3945487 | biostudies-literature

Coplanar Donor-?-Acceptor Dyes Featuring a Furylethynyl Spacer for Dye-Sensitized Solar Cells.

Project description:Coplanar metal-free organic dyes featuring a furylethynyl spacer with different donor residues (MeO-, MeS-, and Me?N-) have been synthesized. Density functional theory (DFT) calculations predicted that the Me?N- residue would facilitate more effective charge transfer from donor to acceptor than the MeO- and MeS- residues. In agreement with DFT calculations, the dye-sensitized solar cells (DSSCs) fabricated with the Me?N- functionalized dye exhibited the best power conversion efficiency (?), 2.88%. Furthermore, the effect of the furan spacer on the photophysical properties and DSSC parameters are discussed in comparison to a previously reported thiophene counterpart.

| S-EPMC6427565 | biostudies-literature

Tuning the Acceptor Unit of Push-Pull Porphyrazines for Dye-Sensitized Solar Cells.

Project description:A family of four push-pull porphyrazines of A3B type, where each unit A contains two peripheral propyl chains and the unit B is endowed with a carboxylic acid, were prepared. The carboxylic acid was attached to the β-position of the pyrrolic unit, either directly (Pz 10), or through cyanovinyl (Pz 11) and phenyl (Pz 7) groups. The fourth Pz (14) consisted in a pyrazinoporphyrazine wherein the dinitrogenated heterocycle provided intrinsic donor-acceptor character to the macrocycle and contained a carboxyphenyl substituent. The direct attachment of the carboxylic acid functions and their linkers to the porphyrazine core produces stronger perturbation on the electronic properties of the macrocycle, with respect to their connection through fused benzene or pyrazine rings in TT112 and 14, respectively. The HOMO and LUMO energies of the Pzs, which were estimated with DFT calculations, show little variation within the series, except upon introduction of the cyanovinyl spacer, which produces a decrease in both frontier orbital energetic levels. This effective interaction of cyanovinyl substitution with the macrocycle is also evidenced in UV/Vis spectroscopy, where a large splitting of the Q-band indicates strong desymmetrization of the Pz. The performance of the four Pzs as photosensitizers in DSSCs were also investigated.

| S-EPMC8068076 | biostudies-literature

New Oxindole-Bridged Acceptors for Organic Sensitizers: Substitution and Performance Studies in Dye-Sensitized Solar Cells.

Project description:New D-π-A configured organic sensitizers featuring halogen-substituted oxindole-bridged acceptor units have been synthesized for dye-sensitized solar cells applications. Among fluorine, bromine, and iodine substitution, the cell based on bromine incorporated dye exhibited the highest efficiency. The oxindoles in these sensitizers were found to assist the electron injection through the chelation of their amide carbonyl groups to the TiO2 surface. This study provides an alternate approach for future rational dye design to gain excellent DSSC performance.

| S-EPMC7248932 | biostudies-literature

Effect of Iodide-Based Organic Salts and Ionic Liquid Additives in Dye-Sensitized Solar Cell Performance.

Project description:The use of ionic liquid and organic salts as additives for electrolyte systems in dye-sensitized solar cells have been widely described in recent years. The tunability of their physical-chemical properties according to the cation-anion selection contributes toward their high efficiencies. For this purpose, several iodide-based organic salts including imidazolium, picolinium, guanidinium and alkylammonium cations were tested using acetonitrile/valeronitrile electrolytes and their photovoltaic parameters were compared. A best efficiency of 4.48% (4.15% for the reference) was found for 1-ethyl-2,3-dimethylimidazolium iodide ([C2DMIM]I) containing electrolyte, reaffirming the effectiveness of these additives. 4-tertbutylpyridine was included into the formulation to further improve the performance while determining which iodide salts demonstrate the highest synergy with this additive. [C2DMIM]I once again proved to be the superior additive, achieving an efficiency of 6.48% (6% for the reference). Electrochemical impedance spectroscopy was employed to elucidate the effects of the various additives, demonstrating the relevance of the counter electrode resistance on device performance. Finally, several computational descriptors for the cationic structures were calculated and correlated with the photovoltaic and resistance parameters, showing that properties related to polarity, namely relative positive charge, molecular polarizability and partition coefficient are in good agreement with the counter-electrode resistance.

| S-EPMC9457700 | biostudies-literature

Molecular Weight Effects of Biscarbazole-Based Hole Transport Polymers on the Performance of Solid-State Dye-Sensitized Solar Cells.

Project description:The leakage and volatilization of liquid electrolytes limit the commercialization of dye-sensitized solar cells (DSCs). As solid-state (ss) hole-transporting materials, free from leakage and volatilization, biscarbazole-based polymers with different molecular weights (PBCzA-H (21,200 g/mol) and PBCzA-L (2450 g/mol)) were applied in combination with additives to produce ssDSCs. An ssDSC with PBCzA-H showed a better short-circuit current (Jsc), open-circuit voltage (Voc), and fill factor (FF) than a device with PBCzA-L, resulting in 38% higher conversion efficiency. Compared to the PBCzA-L, the PBCzA-H with a higher molecular weight showed faster hole mobility and larger conductivity, leading to elevations in Jsc via rapid hole transport, Voc via rapid hole extraction, and FF via lowered series and elevated shunt resistances. Thus, it is believed that PBCzA-H is a useful candidate for replacing liquid electrolytes.

| S-EPMC7765262 | biostudies-literature

Photovoltaic Performance of Dye-Sensitized Solar Cells Containing ZnO Microrods.

Project description:At an elevated temperature of 90 °C, a chemical bath deposition using an aqueous solution of Zn(NO3)2·6H2O and (CH2)6N4 resulted in the formation of both nanoflowers and microrods of ZnO on F-doped SnO2 glass with a seed layer. The nanoflowers and microrods were sensitized with dyes for application to the photoelectrodes of dye-sensitized solar cells (DSSCs). By extending the growth time of ZnO, the formation of nanoflowers was reduced and the formation of microrods favored. As the growth time was increased from 4 to 6 and then to 8 h, the open circuit voltage (Voc) values of the DSSCs were increased, whilst the short circuit current (Jsc) values varied only slightly. Changes in the dye-loading amount, dark current, and electrochemical impedance were monitored and they revealed that the increase in Voc was found to be due to a retardation of the charge recombination between photoinjected electrons and I3- ions and resulted from a reduction in the surface area of ZnO microrods. A reduced surface area decreased the dye contents adsorbed on the ZnO microrods, and thereby decreased the light harvesting efficiency (LHE). An increase in the electron collection efficiency attributed to the suppressed charge recombination counteracted the decreased LHE, resulting in comparable Jsc values regardless of the growth time.

| S-EPMC6956303 | biostudies-literature

Impact of TiO2 Nanostructures on Dye-Sensitized Solar Cells Performance.

Project description:The effect of TiO2 nanostructures such as nanoparticles, nanowires, nanotubes on photoanode properties, and dye-sensitized solar cells photovoltaic parameters were studied. The series of dye-sensitized solar cells based on two dyes, that is, commercially N719 and synthesized 3,7'-bis(2-cyano-1-acrylic acid)-10-ethyl-phenothiazine were tested. Additionally, the devices containing a mixture of this sensitizer and chenodeoxycholic acid as co-adsorbent were fabricated. The amount of adsorbed dye molecules to TiO2 was evaluated. The prepared photoanodes with different TiO2 nanostructures were investigated using UV-Vis spectroscopy, optical, atomic force, and scanning electron microscopes. Photovoltaic response of constructed devices was examined based on current-voltage characteristics and electrochemical impedance spectroscopy measurements. It was found that the highest UV-Vis absorption exhibited the photoanode with nanotubes addition. This indicates the highest number of sensitizer molecules anchored to the titanium dioxide photoanode, which was subsequently confirmed by dye-loading tests. The highest power conversion efficiency was (6.97%) for solar cell containing nanotubes and a mixture of the dyes with a co-adsorbent.

| S-EPMC8036646 | biostudies-literature

Molecular Engineering of D-D-π-A-Based Organic Sensitizers for Enhanced Dye-Sensitized Solar Cell Performance.

Project description:A series of molecularly engineered and novel dyes WS1, WS2, WS3, and WS4, based on the D35 donor, 1-(4-hexylphenyl)-2,5-di(thiophen-2-yl)-1H-pyrrole and 4-(4-hexylphenyl)-4H-dithieno[3,2-b:2',3'-d]pyrrole as π-conjugating linkers, were synthesized and compared to the well-known LEG4 dye. The performance of the dyes was investigated in combination with an electrolyte based on Co(II/III) complexes as redox shuttles. The electron recombination between the redox mediators in the electrolyte and the TiO2 interface decreases upon the introduction of 4-hexylybenzene entities on the 2,5-di(thiophen-2-yl)-1H-pyrrole and 4H-dithieno[3,2-b:2',3'-d]pyrrole linker units, probably because of steric hindrance. The open circuit photovoltage of WS1-, WS2-, WS3-, and WS4-based devices in combination with the Co(II/III)-based electrolyte are consistently higher than those based on a I-/I3 - electrolyte by 105, 147, 167, and 75 mV, respectively. The WS3-based devices show the highest power conversion efficiency of 7.4% at AM 1.5 G 100 mW/cm2 illumination mainly attributable to the high open-circuit voltage (V OC).

| S-EPMC6641492 | biostudies-literature

Tailoring of energy levels in D-π-A organic dyes via fluorination of acceptor units for efficient dye-sensitized solar cells.

Project description:A molecular design is presented for tailoring the energy levels in D-π-A organic dyes through fluorination of their acceptor units, which is aimed at achieving efficient dye-sensitized solar cells (DSSCs). This is achieved by exploiting the chemical structure of common D-π-A organic dyes and incorporating one or two fluorine atoms at the ortho-positions of the cyanoacetic acid as additional acceptor units. As the number of incorporated fluorine atoms increases, the LUMO energy level of the organic dye is gradually lowered due to the electron-withdrawing effect of fluorine, which ultimately results in a gradual reduction of the HOMO-LUMO energy gap and an improvement in the spectral response. Systematic investigation of the effects of incorporating fluorine on the photovoltaic properties of DSSCs reveals an upshift in the conduction-band potential of the TiO2 electrode during impedance analysis; however, the incorporation of fluorine also results in an increased electron recombination rate, leading to a decrease in the open-circuit voltage (Voc). Despite this limitation, the conversion efficiency is gradually enhanced as the number of incorporated fluorine atoms is increased, which is attributed to the highly improved spectral response and photocurrent.

| S-EPMC4296309 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data