An Organic Mixed Ion-Electron Conductor for Power Electronics.
Ontology highlight
ABSTRACT:
SUBMITTER: Malti A
PROVIDER: S-EPMC5063141 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:In spite of interesting features as flexibility, organic thin-film transistors have commercially lagged behind due to the low mobilities of organic semiconductors associated with hopping transport. Furthermore, organic transistors usually have much larger channel lengths than their inorganic counterparts since high-resolution structuring is not available in low-cost production schemes. Here, we present an organic permeable-base transistor (OPBT) which, despite extremely simple processing without any high-resolution structuring, achieve a performance beyond what has so far been possible using organic semiconductors. With current densities above 1 kA cm-2 and switching speeds towards 100 MHz, they open the field of organic power electronics. Finding the physical limits and an effective mobility of only 0.06 cm2 V-1 s-1, this OPBT device architecture has much more potential if new materials optimized for its geometry will be developed.
| S-EPMC5356189 | biostudies-literature
Project description:Interface dipoles formed at an electrolyte/electrode interface have been widely studied and interpreted using the "double dipole step" model, where the dipole vector is determined by the size and/or range of motion of the charged ions. Some electron transport materials (ETMs) with lone pairs of electrons on heteroatoms exhibit a similar interfacial behavior. However, the origin of the dipoles in such materials has not yet been explored in great depth. Herein, we systematically investigate the influence of the lone pair of electrons on the interface dipole through three pyridine derivatives B2-B4PyMPM. Experiments show that different positions of nitrogen atoms in the three materials give rise to different hydrogen bonds and molecular orientations, thereby affecting the areal density and direction of the lone pair of electrons. The interface dipoles of the three materials predicted by the "double dipole step" model are in good agreement with the ultraviolet photoelectron spectroscopy results both in spin-coated and vacuum-deposited films. These findings help to better understand the ETMs/electrode interfacial behaviors and provide new guidelines for the molecular design of the interlayer.
| S-EPMC8498986 | biostudies-literature
Project description:Organic electrochemical transistors rely on ionic-electronic volumetric interaction to provide a seamless interface between biology and electronics with outstanding signal amplification. Despite their huge potential, further progress is limited owing to the lack of understanding of the device fundamentals. Here, we investigate organic electrochemical transistors in a wide range of experimental conditions by combining electrical analyses and device modeling. We show that the measurements can be quantitatively explained by nanoscale ionic-electronic charge interaction, giving rise to ion buffering and interface charge compensation. The investigation systematically explains and unifies a wide range of experiments, providing the rationale for the development of high-performance electronics. Unipolar inverters - universal building blocks for electronics - with gain larger than 100 are demonstrated. This is the highest gain ever reported, enabling the design of devices and circuits with enhanced performance and opening opportunities for the next-generation integrated bioelectronics and neuromorphic computing.
| S-EPMC6620344 | biostudies-literature
Project description:In addition to improving ion conductivity and the transference number, single-Li-ion conductors (SLCs) also enable the elimination of interfacial side reactions and concentration difference polarization. Therefore, the SLCs can achieve high performance in solid-state batteries with Li metal as anode and organic molecule as cathode. Covalent organic frameworks (COFs) are leading candidates for constructing SLCs because of the excellent 1D channels and accurate chemical-modification skeleton. Herein, various contents of lithium-sulfonated covalently anchored COFs (denoted as LiO3S-COF1 and LiO3S-COF2) are controllably synthesized as SLCs. Due to the directional ion channels, high Li contents, and single-ion frameworks, LiO3S-COF2 shows exceptional Li-ion conductivity of 5.47 × 10−5 S · cm−1, high transference number of 0.93, and low activation energy of 0.15 eV at room temperature. Such preeminent Li-ion-transported properties of LiO3S-COF2 permit stable Li+ plating/stripping in a symmetric lithium metal battery, effectively impeding the Li dendrite growth in a liquid cell. Moreover, the designed quasi-solid-state cell (organic anthraquinone (AQ) as cathode, Li metal as anode, and LiO3S-COF2 as electrolyte) shows high-capacity retention and rate behavior. Consequently, LiO3S-COF2 implies a potential value restraining the dissolution of small organic molecules and Li dendrite growth.
| S-EPMC9575471 | biostudies-literature
Project description:While solid-state NMR spectroscopic techniques have helped clarify the local structure and dynamics of ionic conductors, similar studies of mixed ionic-electronic conductors (MIECs) have been hampered by the paramagnetic behavior of these systems. Here we report high-resolution (17)O (I = 5/2) solid-state NMR spectra of the mixed-conducting solid oxide fuel cell (SOFC) cathode material La2NiO4+?, a paramagnetic transition-metal oxide. Three distinct oxygen environments (equatorial, axial, and interstitial) can be assigned on the basis of hyperfine (Fermi contact) shifts and quadrupolar nutation behavior, aided by results from periodic DFT calculations. Distinct structural distortions among the axial sites, arising from the nonstoichiometric incorporation of interstitial oxygen, can be resolved by advanced magic angle turning and phase-adjusted sideband separation (MATPASS) NMR experiments. Finally, variable-temperature spectra reveal the onset of rapid interstitial oxide motion and exchange with axial sites at ?130 °C, associated with the reported orthorhombic-to-tetragonal phase transition of La2NiO4+?. From the variable-temperature spectra, we develop a model of oxide-ion dynamics on the spectral time scale that accounts for motional differences of all distinct oxygen sites. Though we treat La2NiO4+? as a model system for a combined paramagnetic (17)O NMR and DFT methodology, the approach presented herein should prove applicable to MIECs and other functionally important paramagnetic oxides.
| S-EPMC5025823 | biostudies-literature
Project description:Power electronics and communication electronics are both based on electromagnetic theory, but they are usually regarded as two distinct subfields in electrical engineering. In fact, however, electric power is the most common matter-based carrier of messages; thus, power electronics and communications can be jointly considered. Here we study the essential nature of dc-dc power converters and characterize the similarity of their operation principle to that of communication systems. Based on this similarity and the double modulation methods used in power electronics and communication, a double modulation strategy for both power and data is presented and applied in dc-dc power converters to achieve what we call 'talkative power'. A modulation strategy called frequency hopping-differential phase shift keying (FH-DPSK) is also presented to overcome the crosstalk between chosen transmission systems. The proposed talkative power strategy sheds new light on and provides inspiration for the further development of power electronics and communication.
| S-EPMC7235034 | biostudies-literature
Project description:Electronics allowing for visible light to pass through are attractive, where a key challenge is to make the core functional units transparent. Here, it is shown that transparent electronics can be constructed by epitaxial growth of metal-organic frameworks (MOFs) on single-layer graphene (SLG) to give a desirable transparency of 95.7% to 550 nm visible light and an electrical conductivity of 4.0 × 104 S m-1. Through lattice and symmetry match, collective alignment of MOF pores and dense packing of MOFs vertically on SLG are achieved, as directly visualized by electron microscopy. These MOF-on-SLG constructs are capable of room-temperature recognition of gas molecules at the ppb level with a linear range from 10 to 108 ppb, providing real-time gas monitoring function in transparent electronics. The corresponding devices can be fabricated on flexible substrates with large size, 3 × 5 cm, and afford continuous folding for more than 200 times without losing conductivity or transparency.
| S-EPMC7175255 | biostudies-literature
Project description:Additive and low-temperature printing processes enable the integration of diverse electronic devices, both power-supplying and power-consuming, on flexible substrates at low cost. Production of a complete electronic system from these devices, however, often requires power electronics to convert between the various operating voltages of the devices. Passive components-inductors, capacitors, and resistors-perform functions such as filtering, short-term energy storage, and voltage measurement, which are vital in power electronics and many other applications. In this paper, we present screen-printed inductors, capacitors, resistors and an RLC circuit on flexible plastic substrates, and report on the design process for minimization of inductor series resistance that enables their use in power electronics. Printed inductors and resistors are then incorporated into a step-up voltage regulator circuit. Organic light-emitting diodes and a flexible lithium ion battery are fabricated and the voltage regulator is used to power the diodes from the battery, demonstrating the potential of printed passive components to replace conventional surface-mount components in a DC-DC converter application.
| S-EPMC4626765 | biostudies-literature
Project description:Epidermal electronic systems feature physical properties that approximate those of the skin, to enable intimate, long-lived skin interfaces for physiological measurements, human-machine interfaces and other applications that cannot be addressed by wearable hardware that is commercially available today. A primary challenge is power supply; the physical bulk, large mass and high mechanical modulus associated with conventional battery technologies can hinder efforts to achieve epidermal characteristics, and near-field power transfer schemes offer only a limited operating distance. Here we introduce an epidermal, far-field radio frequency (RF) power harvester built using a modularized collection of ultrathin antennas, rectifiers and voltage doublers. These components, separately fabricated and tested, can be integrated together via methods involving soft contact lamination. Systematic studies of the individual components and the overall performance in various dielectric environments highlight the key operational features of these systems and strategies for their optimization. The results suggest robust capabilities for battery-free RF power, with relevance to many emerging epidermal technologies.
| S-EPMC6444737 | biostudies-literature
Project description:Flexible and stretchable power sources represent a key technology for the realization of wearable electronics. Developing flexible and stretchable batteries with mechanical endurance that is on par with commercial standards and offer compliance while retaining safety remains a significant challenge. We present a unique approach that demonstrates mechanically robust, intrinsically safe silver-zinc batteries. This approach uses current collectors with enhanced mechanical design, such as helical springs and serpentines, as a structural support and backbone for all battery components. We show wire-shaped batteries based on helical band springs that are resilient to fatigue and retain electrochemical performance over 17,000 flexure cycles at a 0.5-cm bending radius. Serpentine-shaped batteries can be stretched with tunable degree and directionality while maintaining their specific capacity. Finally, the batteries are integrated, as a wearable device, with a photovoltaic module that enables recharging of the batteries.
| S-EPMC5473674 | biostudies-other