Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Calcium Sensitive Fluorescent Dyes Fluo-4 and Fura Red under Pressure: Behaviour of Fluorescence and Buffer Properties under Hydrostatic Pressures up to 200 MPa.

ABSTRACT: The fluorescent Ca2+ sensitive dyes Fura Red (ratiometric) and Fluo-4 (non-ratiometric) are widely utilized for the optical assessment of Ca2+ fluctuations in vitro as well as in situ. The fluorescent behavior of these dyes is strongly depends on temperature, pH, ionic strength and pressure. It is crucial to understand the response of these dyes to pressure when applying calcium imaging technologies in the field of high pressure bioscience. Therefore, we use an optically accessible pressure vessel to pressurize physiological Ca2+-buffered solutions at different fixed concentrations of free Ca2+ (1 nM to 25.6 μM) and a specified dye concentration (12 μM) to pressures of 200 MPa, and record dye fluorescence intensity. Our results show that Fluo-4 fluorescence intensity is reduced by 31% per 100 MPa, the intensity of Fura Red is reduced by 10% per 100 MPa. The mean reaction volume for the dissociation of calcium from the dye molecules [Formula: see text] is determined to -17.8 ml mol-1 for Fluo-4 and -21.3 ml mol-1 for Fura Red. Additionally, a model is presented that is used to correct for pressure-dependent changes in pH and binding affinity of Ca2+ to EGTA, as well as to determine the influence of these changes on dye fluorescence.

SUBMITTER: Schneidereit D

PROVIDER: S-EPMC5072694 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Switching behaviour of dSTORM dyes in glycerol-containing buffer.

Project description:To suppress optical aberrations caused by refractive index mismatch, we employ glycerol-immersion objectives in conjunction with fused silica cover glasses and imaging buffers with a high glycerol content. Here we demonstrate that the addition of glycerol to the buffer does not degrade the switching behaviour of the dyes Alexa Fluor 647 and Alexa Fluor 568 in dSTORM measurements, which shows that this approach is suitable for dSTORM. Additionally, we report evidence that sealed sample geometries as used in our experiments reduce photobleaching due to the lower influx of oxygen into the imaging buffer.

| S-EPMC7426933 | biostudies-literature

Synchrotron X-ray powder diffraction under high pressures up to 33 MPa for mechanoresponsive materials.

Project description:Equipment for synchrotron X-ray diffraction at high pressures up to 33 MPa with an accuracy of ±0.1 MPa using a liquid as a pressure-transmitting medium has been developed. This equipment enables atomic-scale observation of the structural change of mechanoresponsive materials under applied pressures. The validity of the equipment is demonstrated by observation of the pressure dependence of the lattice parameters of copper. The observed bulk modulus of copper was found to be 139 (13) GPa which is a good agreement with the literature value. The developed equipment was subsequently applied to a repeatable mechanoluminescence material, Li0.12Na0.88NbO3:Pr3+. The bulk modulus and compressibility along the a and c axes were determined as 79 (9) GPa, 0.0048 (6) GPa-1 and 0.0030 (9) GPa-1, respectively, for the R3c phase. The advance of high-pressure X-ray diffraction will play an important role in understanding mechanoresponsive materials towards their atomic-scale design.

| S-EPMC10161880 | biostudies-literature

Microbial oil-degradation under mild hydrostatic pressure (10 MPa): which pathways are impacted in piezosensitive hydrocarbonoclastic bacteria?

Project description:Oil spills represent an overwhelming carbon input to the marine environment that immediately impacts the sea surface ecosystem. Microbial communities degrading the oil fraction that eventually sinks to the seafloor must also deal with hydrostatic pressure, which linearly increases with depth. Piezosensitive hydrocarbonoclastic bacteria are ideal candidates to elucidate impaired pathways following oil spills at low depth. In the present paper, we tested two strains of the ubiquitous Alcanivorax genus, namely A. jadensis KS_339 and A. dieselolei KS_293, which is known to rapidly grow after oil spills. Strains were subjected to atmospheric and mild pressure (0.1, 5 and 10 MPa, corresponding to a depth of 0, 500 and 1000 m, respectively) providing n-dodecane as sole carbon source. Pressures equal to 5 and 10 MPa significantly lowered growth yields of both strains. However, in strain KS_293 grown at 10 MPa CO2 production per cell was not affected, cell integrity was preserved and PO4(3-) uptake increased. Analysis of its transcriptome revealed that 95% of its genes were downregulated. Increased transcription involved protein synthesis, energy generation and respiration pathways. Interplay between these factors may play a key role in shaping the structure of microbial communities developed after oil spills at low depth and limit their bioremediation potential.

| S-EPMC4810429 | biostudies-literature

Graphene from amorphous titanium carbide by chlorination under 200 °C and atmospheric pressures.

Project description:The synthesis of graphene via decomposition of SiC has opened a promising route for large-scale production of graphene. However, extremely high requirements for almost perfectly ordered crystal SiC and harsh process conditions such as high temperatures (>1200 °C) and ultra-high vacuum are two significant challenges hindering its wide use to synthesize graphene by decomposition of SiC. Here, we show that the readily available precursor of carbides, amorphous TiC (a-Ti(1-x)C(x)), can be transformed into graphene nanosheets (GNS) with tunable layers by chlorination method at very low temperatures (200 °C) and ambient pressures. Moreover, freestanding GNS can be achieved by stripping off GNS from the surface of resulting particles. Therefore, our strategy, the direct transformation of a-Ti(1-x)C(x) into graphene, is simple and expected to be easily scaled up.

| S-EPMC4074788 | biostudies-literature

Effect of Admixtures on the Yield Stresses of Cement Pastes under High Hydrostatic Pressures.

Project description:When cement-based materials are transported at a construction site, they undergo high pressures during the pumping process. The rheological properties of the materials under such high pressures are unknown, and estimating the workability of the materials after pumping is a complex problem. Among various influential factors on the rheology of concrete, this study investigated the effect of mineral and chemical admixtures on the high-pressure rheology. A rheometer was fabricated that could measure the rheological properties while maintaining a high pressure to simulate the pumping process. The effects of superplasticizer, silica fume, nanoclay, fly ash, or ground granulated blast furnace slag were investigated when mixed with two control cement pastes. The water-to-cement ratios were 0.35 and 0.50.

| S-EPMC5456673 | biostudies-other

Spectroscopic Behaviour of Two Novel Azobenzene Fluorescent Dyes and Their Polymeric Blends.

Project description:Two novel symmetrical bis-azobenzene red dyes ending with electron-withdrawing or donor groups were synthesized. Both chromophores display good solubility, excellent chemical, and thermal stability. The two dyes are fluorescent in solution and in the solid-state. The spectroscopic properties of the neat crystalline solids were compared with those of doped blends of different amorphous matrixes. Blends of non-conductive and of emissive and conductive host polymers were formed to evaluate the potential of the azo dyes as pigments and as fluorophores. Both in absorbance and emission, the doped thin layers have CIE coordinates in the spectral region from yellow to red. The fluorescence quantum yield measured for the brightest emissive blend reaches 57%, a remarkable performance for a steadily fluorescent azo dye. A DFT approach was employed to examine the frontier orbitals of the two dyes.

| S-EPMC7144390 | biostudies-literature

Rate and Extent of Growth of a Model Extremophile, <i>Archaeoglobus fulgidus</i>, Under High Hydrostatic Pressures.

Project description:High hydrostatic pressure (HHP) batch cultivation of a model extremophile, Archaeoglobus fulgidus type strain VC-16, was performed to explore how elevated pressures might affect microbial growth and physiology in the deep marine biosphere. Though commonly identified in high-temperature and high-pressure marine environments (up to 2-5 km below sea level, 20-50 MPa pressures), A. fulgidus growth at elevated pressure has not been characterized previously. Here, exponential growth of A. fulgidus was observed up to 60 MPa when supported by the heterotrophic metabolism of lactate oxidation coupled to sulfate reduction, and up to 40 MPa for autotrophic CO2 fixation coupled to thiosulfate reduction via H2. Maximum growth rates for this heterotrophic metabolism were observed at 20 MPa, suggesting that A. fulgidus is a moderate piezophile under these conditions. However, only piezotolerance was observed for autotrophy, as growth rates remained nearly constant from 0.3 to 40 MPa. Experiments described below show that A. fulgidus continues both heterotrophic sulfate reduction and autotrophic thiosulfate reduction nearly unaffected by increasing pressure up to 30 MPa and 40 MPa, respectively. As these pressures encompass a variety of subsurface marine environments, A. fulgidus serves as a model extremophile for exploring the effects of elevated pressure on microbial metabolisms in the deep subsurface. Further, these results exemplify the need for high-pressure cultivation of deep-sea and subsurface microorganisms to better reflect in situ physiological conditions.

| S-EPMC7303961 | biostudies-literature

Infusion efficiency of fluorescein derivatives of different molecular sizes into various starches under atmospheric and high hydrostatic pressures.

Project description:Fluorescein isothiocyanate-dextrans (FDs) of different molecular weights were infused into corn, waxy rice, tapioca, and potato starches under atmospheric and high hydrostatic pressures (HHP). FD4, FD10, FD20, and FD40 (Mw 4000, 10,000, 20,000, and 40,000, respectively) were used as infusion materials. Confocal laser scanning microscopy confirmed that all FDs except FD40 infused into corn, waxy rice, and tapioca starches. However, no FDs infused into potato starch. Corn starch had the highest amounts of infused FDs. As molar mass increased, the amount of infused FD decreased in all starches. The infused amounts of FDs in corn starch were similar at 200-300 MPa and atmospheric pressure. Infusion of FDs at 400 MPa was reduced due to partial gelatinization. These results confirm that infusion efficiency is inversely proportional to the molecular weight of the infused material and large materials (Mw > 40,000) cannot be infused into starch granules under atmospheric pressure or HHP.Supplementary informationThe online version contains supplementary material available at 10.1007/s10068-021-00972-2.

| S-EPMC8520013 | biostudies-literature

Complete Genome Sequence of the Hyperthermophilic and Piezophilic Archeon Thermococcus piezophilus CDGST, Able To Grow under Extreme Hydrostatic Pressures.

Project description:We report the genome sequence of Thermococcus superprofundus strain CDGS(T), a new piezophilic and hyperthermophilic member of the order Thermococcales isolated from the world's deepest hydrothermal vents, at the Mid-Cayman Rise. The genome is consistent with a heterotrophic, anaerobic, and piezophilic lifestyle.

| S-EPMC4945791 | biostudies-literature

Evaluation of three different fluorescent dyes for cDNA labeling in microarrays

Project description:The simultaneous measurement of gene expression for thousands of genes in a single analysis by the microarray technology allows researchers to describe transcriptomes in various samples of interest. Problems with variation in data quality derived from microarray experiments are well known and might result from poor RNA quality, background problems, or sub optimal signal strength. To assess variation due to the fluorescent dye chosen, three different dye pairs were tested for labelling of cDNA in gene expression analysis experiments on a porcine immune focused oligonucleotide microarray (POM3). This in-house oligonucleotide microarray allowed a direct comparison of background fluorescence, Median signal intensities, numbers of spots detected, and resistance to photobleaching between different dye pairs. We tested Alexa Flour 546/647, Cy3/Cy5 as well as Oyster 550/650 all from Genisphere Inc., Hatfield, PA, USA. Keywords: Comparison of fluorescent dyes

2009-01-16 | GSE4855 | GEO

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data