Hybrid Multilayered Plasmonic Nanostars for Coherent Random Lasing.
Ontology highlight
ABSTRACT:
SUBMITTER: Munkhbat B
PROVIDER: S-EPMC5075942 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Huge spectral coverage of random lasing throughout the visible up to the infrared range is achieved with star-shaped gold nanoparticles ("nanostars"). As intrinsically broadband scattering centers, the nanostars are suspended in solutions of various laser dyes, forming randomly arranged resonators which support coherent laser modes. The narrow emission line widths of 0.13 nm or below suggest that gold nanostars provide an efficient coherent feedback for random lasers over an extensive range of wavelengths, all together spanning almost a full optical octave from yellow to infrared.
| S-EPMC4915225 | biostudies-literature
Project description:The spatial and temporal coherence of the fluorescence emission controlled by a quasi-two-dimensional hybrid photonic-plasmonic crystal structure covered with a thin fluorescent-molecular-doped dielectric film is investigated experimentally. A simple theoretical model to describe how a confined quasi-two-dimensional optical mode may induce coherent fluorescence emission is also presented. Concerning the spatial coherence, it is experimentally observed that the coherence area in the plane of the light source is in excess of 49 ?m(2), which results in enhanced directional fluorescence emission. Concerning temporal coherence, the obtained coherence time is 4 times longer than that of the normal fluorescence emission in vacuum. Moreover, a Young's double-slit interference experiment is performed to directly confirm the spatially coherent emission. This smoking gun proof of spatial coherence is reported here for the first time for the optical-mode-modified emission.
| S-EPMC4358154 | biostudies-other
Project description:A compound cavity was proposed to achieve both whispering gallery mode (WGM) lasing and random lasing. The WGM-random compound cavity consisted of a random structure with an annular boundary, which was fabricated by a method combining both inkjet printing and metal-assisted chemical etching methods. An ultrathin polymer membrane was attached to the WGM-random compound cavity, forming a polymer laser device. A transformation from WGM lasing to random lasing was observed under optical pumping conditions. The laser performance could be easily tailored by changing the parameter of the WGM-random compound cavity. These results provide a new avenue for the design of integrated light sources for sensing applications.
| S-EPMC7183060 | biostudies-literature
Project description:Plasmon lasers can support ultrasmall mode confinement and ultrafast dynamics with device feature sizes below the diffraction limit. However, most plasmon-based nanolasers rely on solid gain materials (inorganic semiconducting nanowire or organic dye in a solid matrix) that preclude the possibility of dynamic tuning. Here we report an approach to achieve real-time, tunable lattice plasmon lasing based on arrays of gold nanoparticles and liquid gain materials. Optically pumped arrays of gold nanoparticles surrounded by liquid dye molecules exhibit lasing emission that can be tuned as a function of the dielectric environment. Wavelength-dependent time-resolved experiments show distinct lifetime characteristics below and above the lasing threshold. By integrating gold nanoparticle arrays within microfluidic channels and flowing in liquid gain materials with different refractive indices, we achieve dynamic tuning of the plasmon lasing wavelength. Tunable lattice plasmon lasers offer prospects to enhance and detect weak physical and chemical processes on the nanoscale in real time.
| S-EPMC4411284 | biostudies-literature
Project description:Plasmonic lattices of metal nanoparticles have emerged as an effective platform for strong light-matter coupling, lasing, and Bose-Einstein condensation. However, the full potential of complex unit cell structures has not been exploited. On the other hand, bound states in continuum (BICs) have attracted attention, as they provide topologically protected optical modes with diverging quality factors. Here, we show that quadrumer nanoparticle lattices enable lasing in a quasi-BIC mode with a highly out-of-plane character. By combining theory with polarization-resolved measurements of the emission, we show that the lasing mode has a topological charge. Our analysis reveals that the mode is primarily polarized out-of-plane as a result of the quadrumer structure. The quality factors of the out-of-plane BIC modes of the quadrumer array can be exceedingly high. Our results unveil the power of complex multiparticle unit cells in creating topologically protected high-Q modes in periodic nanostructures.
| S-EPMC8780794 | biostudies-literature
Project description:Silicon photonics enables large-scale photonic-electronic integration by leveraging highly developed fabrication processes from the microelectronics industry. However, while a rich portfolio of devices has already been demonstrated on the silicon platform, on-chip light sources still remain a key challenge since the indirect bandgap of the material inhibits efficient photon emission and thus impedes lasing. Here we demonstrate a class of infrared lasers that can be fabricated on the silicon-on-insulator (SOI) integration platform. The lasers are based on the silicon-organic hybrid (SOH) integration concept and combine nanophotonic SOI waveguides with dye-doped organic cladding materials that provide optical gain. We demonstrate pulsed room-temperature lasing with on-chip peak output powers of up to 1.1 W at a wavelength of 1,310 nm. The SOH approach enables efficient mass-production of silicon photonic light sources emitting in the near infrared and offers the possibility of tuning the emission wavelength over a wide range by proper choice of dye materials and resonator geometry.
| S-EPMC4786640 | biostudies-literature
Project description:A directional random laser mediated by transverse Anderson localization in a disordered glass optical fiber is reported. Previous demonstrations of random lasers have found limited applications because of their multi-directionality and chaotic fluctuations in the laser emission. The random laser presented in this paper operates in the Anderson localization regime. The disorder induced localized states form isolated local channels that make the output laser beam highly directional and stabilize its spectrum. The strong transverse disorder and longitudinal invariance result in isolated lasing modes with negligible interaction with their surroundings, traveling back and forth in a Fabry-Perot cavity formed by the air-fiber interfaces. It is shown that if a localized input pump is scanned across the disordered fiber input facet, the output laser signal follows the transverse position of the pump. Moreover, a uniformly distributed pump across the input facet of the disordered fiber generates a laser signal with very low spatial coherence that can be of practical importance in many optical platforms including image transport with fiber bundles.
| S-EPMC6062316 | biostudies-literature
Project description:We design an ultra-compact active hybrid plasmonic ring resonator for lasing applications at deep sub-wavelength scale. The combined contributions of hybrid plasmonic mode, circular-shaped cross section of nanowire, and ring resonator structure with round-trip whispering-gallery cavity, benefit reduced metallic absorption loss, tight mode confinement, enhanced cavity feedback, achieving high quality factor (Q), small mode volume (V), high Purcell factor (Fp), low threshold gain (Gth), and ultra-small footprint with sub-micron size. The performance dependence on the geometrical parameters, including gap height (Hg), cross section radius (Rc), and ring radius (Rr), are comprehensively analyzed, showing high Q factor of 1650 (Hg = 30 nm, Rc = 100 nm, Rr = 800 nm), ultra-small mode volume of 0.0022 μm(3) (Hg = 5 nm, Rc = 100 nm, Rr = 800 nm), cut off of all photonic modes for pure plasmonic mode lasing with Rc<70 nm (Hg = 10 nm, Rr = 800 nm), maximum Purcell factor of 813 and minimum threshold gain of 1407 cm(-1) (Hg = 5 nm, Rc = 50 nm, Rr = 400 nm). The general design rules of the presented hybrid plasmonic ring resonator provide the potential to further extend ultra-compact sub-micron lasing applications (i.e. different lasing wavelength band) with proper choice of gain materials and geometric structures.
| S-EPMC3893649 | biostudies-other
Project description:Enormous attention has been paid to optical microresonators which hold a great promise for microlasers as well as fundamental studies in cavity quantum electrodynamics. Here we demonstrate a three-dimensional (3D) hybrid microresonator combining self-assembled hemispherical structure with a planar reflector. By incorporating dye molecules into the hemisphere, optically pumped lasing phenomenon is observed at room temperature. We have studied the lasing behaviors with different cavity sizes, and particularly single longitudinal mode lasing from hemispheres with diameter ?15 ?m is achieved. Detailed characterizations indicate that the lasing modes shift under varying pump densities, which can be well-explained by frequency shift and mode hopping. This work provides a versatile approach for 3D confined microresonators and opens an opportunity to realize tunable single mode microlasers.
| S-EPMC3337539 | biostudies-literature
Project description:Smart multifunctional nanoparticles with magnetic and plasmonic properties assembled on a single nanoplatform are promising for various biomedical applications. Owing to their expanding imaging and therapeutic capabilities in response to external stimuli, they have been explored for on-demand drug delivery, image-guided drug delivery, and simultaneous diagnostic and therapeutic (i.e. theranostic) applications. In this study, we engineered nanoparticles with unique morphology consisting of a superparamagnetic iron oxide core and star-shaped plasmonic shell with high-aspect-ratio gold branches. Strong magnetic and near-infrared (NIR)-responsive plasmonic properties of the engineered nanostars enabled multimodal quantitative imaging combining advantageous functions of magnetic resonance imaging (MRI), magnetic particle imaging (MPI), photoacoustic imaging (PAI), and image-guided drug delivery with a tunable drug release capacity. The model drug molecules bound to the core-shell nanostars were released upon NIR illumination due to the heat generation from the core-shell nanostars. Moreover, our simulation analysis showed that the specific design of the core-shell nanostars demonstrated a pronounced multipolar plasmon resonance, which has not been observed in previous reports. The multimodal imaging and NIR-triggered drug release capabilities of the proposed nanoplatform verify their potential for precise and controllable drug release with different applications in personalized medicine.
| S-EPMC7308341 | biostudies-literature