Dataset Information

Chemical kinetic model uncertainty minimization through laminar flame speed measurements.

ABSTRACT: Laminar flame speed measurements were carried for mixture of air with eight C3-4 hydrocarbons (propene, propane, 1,3-butadiene, 1-butene, 2-butene, iso-butene, n-butane, and iso-butane) at the room temperature and ambient pressure. Along with C1-2 hydrocarbon data reported in a recent study, the entire dataset was used to demonstrate how laminar flame speed data can be utilized to explore and minimize the uncertainties in a reaction model for foundation fuels. The USC Mech II kinetic model was chosen as a case study. The method of uncertainty minimization using polynomial chaos expansions (MUM-PCE) (D.A. Sheen and H. Wang, Combust. Flame 2011, 158, 2358-2374) was employed to constrain the model uncertainty for laminar flame speed predictions. Results demonstrate that a reaction model constrained only by the laminar flame speed values of methane/air flames notably reduces the uncertainty in the predictions of the laminar flame speeds of C3 and C4 alkanes, because the key chemical pathways of all of these flames are similar to each other. The uncertainty in model predictions for flames of unsaturated C3-4 hydrocarbons remain significant without considering fuel specific laminar flames speeds in the constraining target data set, because the secondary rate controlling reaction steps are different from those in the saturated alkanes. It is shown that the constraints provided by the laminar flame speeds of the foundation fuels could reduce notably the uncertainties in the predictions of laminar flame speeds of C4 alcohol/air mixtures. Furthermore, it is demonstrated that an accurate prediction of the laminar flame speed of a particular C4 alcohol/air mixture is better achieved through measurements for key molecular intermediates formed during the pyrolysis and oxidation of the parent fuel.

SUBMITTER: Park O

PROVIDER: S-EPMC5120407 | biostudies-literature | 2016 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Chemical kinetic model uncertainty minimization through laminar flame speed measurements.

Park Okjoo O Veloo Peter S PS Sheen David A DA Tao Yujie Y Egolfopoulos Fokion N FN Wang Hai H

Combustion and flame 20160725

Laminar flame speed measurements were carried for mixture of air with eight C3-4 hydrocarbons (propene, propane, 1,3-butadiene, 1-butene, 2-butene, iso-butene, n-butane, and iso-butane) at the room temperature and ambient pressure. Along with C1-2 hydrocarbon data reported in a recent study, the entire dataset was used to demonstrate how laminar flame speed data can be utilized to explore and minimize the uncertainties in a reaction model for foundation ...[more]

PMID: 27890938

Similar Datasets

Project description:A persistent obstacle for constructing kinetic models of metabolism is uncertainty in the kinetic properties of enzymes. Currently, available methods for building kinetic models can cope indirectly with uncertainties by integrating data from different biological levels and origins into models. In this study, we use the recently proposed computational approach iSCHRUNK (in Silico Approach to Characterization and Reduction of Uncertainty in the Kinetic Models), which combines Monte Carlo parameter sampling methods and machine learning techniques, in the context of Bayesian inference. Monte Carlo parameter sampling methods allow us to exploit synergies between different data sources and generate a population of kinetic models that are consistent with the available data and physicochemical laws. The machine learning allows us to data-mine the a priori generated kinetic parameters together with the integrated datasets and derive posterior distributions of kinetic parameters consistent with the observed physiology. In this work, we used iSCHRUNK to address a design question: can we identify which are the kinetic parameters and what are their values that give rise to a desired metabolic behavior? Such information is important for a wide variety of studies ranging from biotechnology to medicine. To illustrate the proposed methodology, we performed Metabolic Control Analysis, computed the flux control coefficients of the xylose uptake (XTR), and identified parameters that ensure a rate improvement of XTR in a glucose-xylose co-utilizing S. cerevisiae strain. Our results indicate that only three kinetic parameters need to be accurately characterized to describe the studied physiology, and ultimately to design and control the desired responses of the metabolism. This framework paves the way for a new generation of methods that will systematically integrate the wealth of available omics data and efficiently extract the information necessary for metabolic engineering and synthetic biology decisions.

Project description:Mobile mapping of air pollution has the potential to provide pollutant concentration data at unprecedented spatial scales. Characterizing instrument performance in the mobile context is challenging, but necessary to analyze and interpret the resulting data. We used robust statistical methods to assess mobile platform performance using data collected with the Aclima Inc. mobile air pollution measurement and data acquisition platform installed on three Google Street View cars. They were driven throughout the greater Denver metropolitan area between July 25, 2014 and August 14, 2014, measuring ozone (O3), nitrogen dioxide (NO2), nitric oxide (NO), black carbon (BC), and size-resolve particle number counts (PN) between 0.3 μm and 5.0 μm diameter. August 6, 2014 was dedicated to parked and moving collocations among the three cars, allowing an assessment of measurement precision and bias. We used the median absolute deviation (MAD) to estimate instrument precision from outdoor, parked collocations. Bias was assessed by measurements obtained from parked cars using the standard deviation of median values over a collocated measurement period, as well as by Passing-Bablok regression statistics while the cars were moving and collocated. For the moving collocation periods, we compared the distribution of 1-σ standard deviations among the 3 cars to the estimated distribution assuming only measurement uncertainty (precision and bias). The distribution of mobile measurements agreed well with the theoretical uncertainty distribution at the lower end of the distribution for O3, NO2, and PN. We assert that the difference between the actual and theoretical distributions is due to real spatial variability between pollutants. The agreement between the parked car estimates of uncertainty and that measured during the mobile collocations (at the lower quantiles) provides evidence that on-road collocation while parked could be sufficient for estimating measurement uncertainties of a mobile platform, even when extended to the moving environment.

Dataset Information

Chemical kinetic model uncertainty minimization through laminar flame speed measurements.

Publications

Chemical kinetic model uncertainty minimization through laminar flame speed measurements.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets