Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Self-assembled and intercalated film of reduced graphene oxide for a novel vacuum pressure sensor.

ABSTRACT: We report a new method for measuring vacuum pressures using Van der Waals (VDW) interactions between reduced graphene oxide (RGO) sheets. For this purpose, we utilized a reaction-based self-assembly process to fabricate various intercalated RGO (i-RGO) films, and monitored their electrical behavior with changing pressure and temperature. Pumping to remove gas from a vacuum chamber produced a decrease in the sheet resistance of i-RGO. With further pumping, distinctly different sheet resistance behaivors were observed depending on the measurement temperature. With increasing vacuum pressure, the resistance increased at 100 °C, whereas it decreased at 30 °C. Two types of VDW interactions are proposed to explain these features: a local VDW interaction between RGO sheets that resulted in V-shaped curves of sheet resistance with pressure changes and broad VDW interactions that occur between RGO sheets when the elastic force required to bend carbon clusters on an RGO sheet exceeds their vibrational energy at low temperatures. On the basis of the results, we propose that the resistance behavior of i-RGO as a function of vacuum pressure can be interpreted as the sum of the two different VDW interactions.

SUBMITTER: Ahn SI

PROVIDER: S-EPMC5156946 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Self-Assembled Monolayers Coated Porous SnO2 Film Gas Sensor with Reduced Humidity Influence.

Project description:Metal-oxide sensors, detect gas through the reaction of surface oxygen molecules with target gases, are promising for the detection of toxic pollutant gases, combustible gases, and organic vapors; however, their sensitivity, selectivity, and long-term stability limit practical applications. Porous structure for increasing surface area, adding catalyst, and altering the operation temperature are proposed for enhancing the sensitivity and selectivity. Although humidity can significantly affect the property and stability of the sensors, studies focusing on the long-term stability of gas sensors are scarce. To reduce the effects of humidity, 1H, 1H, 2H, 2H-perfluorooctyltriethoxysilane (PFOTS) was coated on a porous SnO2 film. The interconnected SnO2 nanowires improved the high surface area, and the PFOTS coating provided superhydrophobicity at water contact angle of 159°and perfect water vapor repellency inside E-SEM. The superhydrophobic porous morphology was maintained under relative humidity of 99% and operating temperature of 300 °C. The CO gas sensing of 5, 20, and 50 ppm were obtained with linearity at various humidity. Flame detection was also achieved with practical high humidity conditions. These results suggest the simple way for reliable sensing of nanostructured metal-oxide gas sensors with high sensitivity and long-term stability even in highly humid environments.

| S-EPMC7829704 | biostudies-literature

Self-assembled monolayers of reduced graphene oxide for robust 3D-printed supercapacitors.

Project description:Herein, additive manufacturing, which is extremely promising in different sectors, has been adopted in the electrical energy storage field to fabricate efficient materials for supercapacitor applications. In particular, Al2O3-, steel-, and Cu-based microparticles have been used for the realization of 3D self-assembling materials covered with reduced graphene oxide to be processed through additive manufacturing. Functionalization of the particles with amino groups and a subsequent "self-assembly" step with graphene oxide, which was contextually partially reduced to rGO, was carried out. To further improve the electrical conductivity and AM processability, the composites were coated with a polyaniline-dodecylbenzene sulfonic acid complex and further blended with PLA. Afterward, they were extruded in the form of filaments, printed through the fused deposition modeling technique, and assembled into symmetrical solid-state devices. Electrochemical tests showed a maximum mass capacitance of 163 F/g, a maximum energy density of 15 Wh/Kg at 10 A/g, as well as good durability (85% capacitance retention within 5000 cycles) proving the effectiveness of the preparation and the efficiency of the as-manufactured composites.

| S-EPMC11217268 | biostudies-literature

Ultra-sensitive graphene sensor for measuring high vacuum pressure.

Project description:We demonstrate here that several different graphene nanoribbon (GNR) samples can be separated from the GNR mixture synthesized by conventional methods. The sheet resistance of the purified GNR gradually decreased with decreasing pressure at 30?°C, whereas it increased at 100?°C. A hypothesis based on van der Waals attractive interactions between GNR sheets was introduced to explain this finding. This hypothesis verified by the shifted main peaks in vacuum X-ray diffraction spectra: 0.022?nm and 0.041?nm shifts were observed for reduced graphene oxide (RGO) and GNR, respectively. Theoretical calculations indicated that, for RGO, the shifted distance was similar to the calculated distance. The response of the GNR sensor to pressure changes occurred rapidly (in seconds). The normalized response time of each sample indicated that sensor using GNR reduced the tailing of the response time by shortening the diffusion path of gas molecules. The sensitivity of the GNR sensor was three times that of RGO in the given pressure range. Moreover, the sensitivity of GNR was much larger than those of the most popularly studied pressure sensors using Piezoresistivity, and the sensor could detect vacuum pressures of 8?×?10-7?Torr.

| S-EPMC5626739 | biostudies-literature

Graphene Oxide-Based Membranes Intercalated with an Aromatic Crosslinker for Low-Pressure Nanofiltration.

Project description:Graphene oxide (GO), a carbonaceous 2D nanomaterial, has received significant interest as a next-generation membrane building block. To fabricate high-performance membranes, an effective strategy involves stacking GO nanosheets in laminated structures, thereby creating unique nanochannel galleries. One outstanding merit of laminar GO membranes is that their permselectivity is readily tunable by tailoring the size of the nanochannels. Here, a high-performance GO-based nanofiltration membrane was developed by intercalating an aromatic crosslinker, α,α/-dichloro-p-xylene (DCX), between the layers in laminated GO nanosheets. Owing to the formation of strong covalent bonds between the crosslinker and the GO, the resulting GO laminate membrane exhibited outstanding structural stability. Furthermore, due to the precisely controlled and enlarged interlayer spacing distance of the developed DCX-intercalated GO membrane, it achieved an over two-fold enhancement in water permeability (11 ± 2 LMH bar-1) without sacrificing the rejection performance for divalent ions, contrary to the case with a pristine GO membrane.

| S-EPMC9612350 | biostudies-literature

Supramolecular Electrochemical Sensor for Dopamine Detection Based on Self-Assembled Mixed Surfactants on Gold Nanoparticles Deposited Graphene Oxide.

Project description:A new supramolecular electrochemical sensor for highly sensitive detection of dopamine (DA) was fabricated based on supramolecular assemblies of mixed two surfactants, tetra-butylammonium bromide (TBABr) and sodium dodecyl sulphate (SDS), on the electrodeposition of gold nanoparticles on graphene oxide modified on glassy carbon electrode (AuNPs/GO/GCE). Self-assembled mixed surfactants (TBABr/SDS) were added into the solution to increase the sensitivity for the detection of DA. All electrodes were characterized by scanning electron microscopy (SEM), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The supramolecular electrochemical sensor (TBABr/SDS???AuNPs/GO/GCE) showed excellent electrocatalytic activity toward the oxidation of DA. Under the optimum conditions, the concentration of DA was obtained in the range from 0.02 µM to 1.00 µM, with a detection limit of 0.01 µM (3s/b). The results displayed that TBABr/SDS???AuNPs/GO/GCE exhibited excellent performance, good sensitivity, and reproducibility. In addition, the proposed supramolecular electrochemical sensor was successfully applied to determine DA in human serum samples with satisfactory recoveries (97.26% to 104.21%).

| S-EPMC7321304 | biostudies-literature

Low Surface Roughness Graphene Oxide Film Reduced with Aluminum Film Deposited by Magnetron Sputtering.

Project description:Graphene film has wide applications in optoelectronic and photovoltaic devices. A novel and facile method was reported for the reduction of graphene oxide (GO) film by electron transfer and nascent hydrogen produced between aluminum (Al) film deposited by magnetron sputtering and hydrochloric acid (HCl) solution for only 5 min, significantly shorter than by other chemical reduction methods. The thickness of Al film was controlled utilizing a metal detection sensor. The effect of the thickness of Al film and the concentration of HCl solution during the reduction was explored. The optimal thickness of Al film was obtained by UV-Vis spectroscopy and electrical conductivity measurement of reduced GO film. Atomic force microscope images could show the continuous film clearly, which resulted from the overlap of GO flakes, the film had a relatively flat surface morphology, and the surface roughness reduced from 7.68 to 3.13 nm after the Al reduction. The film sheet resistance can be obviously reduced, and it reached 9.38 kΩ/sq with a high transmittance of 80% (at 550 nm). The mechanism of the GO film reduction by electron transfer and nascent hydrogen during the procedure was also proposed and analyzed.

| S-EPMC8227777 | biostudies-literature

Free-Standing PVDF/Reduced Graphene Oxide Film for All-Solid-State Flexible Supercapacitors towards Self-Powered Systems.

Project description:The development of polymer-based devices has attracted much attention due to their miniaturization, flexibility, lightweight and sustainable power sources with high efficiency in the field of wearable/portable electronics, and energy system. In this work, we proposed a polyvinylidene fluoride (PVDF)-based composite matrix for both energy harvesting and energy storage applications. The physicochemical characterizations, such as X-ray diffraction, laser Raman, and field-emission scanning electron microscopy (FE-SEM) analyses, were performed for the electrospun PVDF/sodium niobate and PVDF/reduced graphene oxide composite film. The electrospun PVDF/sodium niobate nanofibrous mat has been utilized for the energy harvester which shows an open circuit voltage of 40 V (peak to peak) at an applied compressive force of 40 N. The PVDF/reduced graphene oxide composite film acts as the electrode for the symmetric supercapacitor (SSC) device fabrication and investigated for their supercapacitive properties. Finally, the self-charging system has been assembled using PVDF/sodium niobate (energy harvester), and PVDF/reduced graphene oxide SSC (energy storage) and the self-charging capability is investigated. The proposed self-charging system can create a pathway for the all-polymer based composite high-performance self-charging system.

| S-EPMC7074646 | biostudies-literature

Reduced Graphene Oxide Thin Film on Conductive Substrates by Bipolar Electrochemistry.

Project description:Recent years have shown an increased interest in developing manufacturing processes for graphene and its derivatives that consider the environmental impact and large scale cost-effectiveness. However, today's most commonly used synthesis routes still suffer from their excessive use of harsh chemicals and/or the complexity and financial cost of the process. Furthermore, the subsequent transfer of the material onto a substrate makes the overall process even more intricate and time-consuming. Here we describe a single-step, single-cell preparation procedure of metal-supported reduced graphene oxide (rGO) using the principle of bipolar electrochemistry of graphite in deionized water. Under the effect of an electric field between two stainless steel feeder electrodes, grapheme layers at the anodic pole of the wireless graphite were oxidized into colloidal dispersion of GO, which migrated electrophoretically towards the anodic side of the cell, and deposited in the form of rGO (d(002) = 0.395 nm) by van der Waals forces. For substrates chemically more susceptible to the high anodic voltage, we show that the electrochemical setup can be adapted by placing the latter between the wireless graphite and the stainless steel feeder anode. This method is straightforward, inexpensive, environmentally-friendly, and could be easily scaled up for high yield and large area production of rGO thin films.

| S-EPMC4756714 | biostudies-literature

Nanomechanics of graphene oxide-bacteriophage based self-assembled porous composites.

Project description:Graphene oxide, integrated with the filamentous bacteriophage M13, forms a 3D large-scale multifunctional porous structure by self-assembly, with considerable potential for applications. We performed Raman spectroscopy under pressure on this porous composite to understand its fundamental mechanics. The results show that at low applied pressure, the [Formula: see text] bonds of graphene oxide stiffen very little with increasing pressure, suggesting a complicated behaviour of water intercalated between the graphene layers. The key message of this paper is that water in a confined space can have a significant impact on the nanostructure that hosts it. We introduced carbon nanotubes during the self-assembly of graphene oxide and M13, and a similar porous macro-structure was observed. However, in the presence of carbon nanotubes, pressure is transmitted to the [Formula: see text] bonds of graphene oxide straightforwardly as in graphite. The electrical conductivity of the composite containing carbon nanotubes is improved by about 30 times at a bias voltage of 10 V. This observation suggests that the porous structure has potential in applications where good electrical conductivity is desired, such as sensors and batteries.

| S-EPMC7515913 | biostudies-literature

Lateral photovoltaic effect in flexible free-standing reduced graphene oxide film for self-powered position-sensitive detection.

Project description:Lightweight, simple and flexible self-powered photodetectors are urgently required for the development and application of advanced optical systems for the future of wearable electronic technology. Here, using a low-temperature reduction process, we report a chemical approach for producing freestanding monolithic reduced graphene oxide papers with different gradients of the carbon/oxygen concentration ratio. We also demonstrate a novel type of freestanding monolithic reduced graphene oxide self-powered photodetector based on a symmetrical metal-semiconductor-metal structure. Upon illumination by a 633-nm continuous wave laser, the lateral photovoltage is observed to vary linfearly with the laser position between two electrodes on the reduced graphene oxide surface. This result may suggest that the lateral photovoltaic effect in the reduced graphene oxide film originates from the built-in electric field by the combination of both the photothermal electric effect and the gradient of the oxygen-to-carbon composition. These results represent substantial progress toward novel, chemically synthesized graphene-based photosensors and suggest one-step integration of graphene-based optoelectronics in the future.

| S-EPMC5025851 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data