Comparison of the real-time PCR method and the Gen-Probe amplified Mycobacterium tuberculosis direct test for detection of Mycobacterium tuberculosis in pulmonary and nonpulmonary specimens.
Ontology highlight
ABSTRACT:
SUBMITTER: Lemaitre N
PROVIDER: S-EPMC516309 | biostudies-literature | 2004 Sep
REPOSITORIES: biostudies-literature
Publications
Comparison of the real-time PCR method and the Gen-Probe amplified Mycobacterium tuberculosis direct test for detection of Mycobacterium tuberculosis in pulmonary and nonpulmonary specimens.
Lemaître Nadine N Armand Sylvie S Vachée Anne A Capilliez Odile O Dumoulin Christine C Courcol René J RJ
Journal of clinical microbiology 20040901 9
Real-time PCR was compared to Amplified Mycobacterium tuberculosis Direct Test (AMTDII) for 100 clinical specimens. The overall sensitivities of the real-time PCR method and AMTDII were similar for respiratory and nonrespiratory specimens. However, real-time PCR seemed to be less susceptible to amplification inhibitors than AMTDII. ...[more]
Similar Datasets
Project description:This study evaluated the feasibility of a molecular strategy based on identification of Mycobacterium tuberculosis by IS6110 PCR or Cobas Amplicor PCR, and rpoB PCR-DNA sequencing of the 81-bp rifampin resistance determining region (RRDR) for direct detection of rifampin resistance in respiratory specimens. A collection of 2,138 respiratory specimens and 352 nonduplicate M. tuberculosis isolates (including 233 isolates from the evaluated respiratory specimens and an additional collection of 119 stored isolates) from Southern China was investigated. Using culture as the reference test, the overall diagnostic sensitivities of an acid-fast bacillus (AFB) smear, Cobas Amplicor PCR, IS6110 PCR were 54.5% (156 of 286), 86.7% (248 of 286), and 89.2% (255 of 286), respectively. The sensitivities of the rpoB PCR for the specimens with positive AFB smears and with positive PCR results in the IS6110 PCR and/or Cobas Amplicor PCR were 100% (156 of 156) and 92.3% (239 of 259), respectively. Of the 352 nonduplicate M. tuberculosis isolates, the agar proportion method for rifampin reported 39 resistant strains. Full agreement (352 of 352) was found with the agar proportion method and the genotype inferred from the rpoB DNA sequencing data for rifampin. Thirty-nine mutations of nine distinct kinds, eight point mutations, and one deletion within the RRDR were found in the 39 resistant strains. For the direct DNA sequencing performed on rpoB PCR-positive respiratory specimens, the concordance with the agar proportion method and the subsequent PCR-sequencing for the culture isolate was 100%. This strategy has potential application for direct and rapid diagnosis of rifampin-resistant M. tuberculosis in IS6110 PCR or Cobas Amplicor PCR-positive respiratory specimens.
| S-EPMC522342 | biostudies-literature
Project description:ObjectiveTo design a rapid test to detect the rifampin (RIF) and isoniazid (INH) resistant mutant based on polymerase chain reaction-single strand conformation polymorphism (PCR-SSCP) technique that analyzes the katG, rpoB genes.MethodsBiochemical test as well as IS6110 targeting PCR revealed 103 clinical samples were tuberculosis. To determine the susceptibility of isolates to anti TB drugs, the proportional method was used. Mutations presented within the amplified products of the katG, rpoB genes were evaluated by SSCP.ResultsUsing proportional method, 12 (11.6%) and 9 (8.7%) isolates were resistant respectively to INH and RIF and 9 (8.7%) isolates showed resistance to both drug (multi-drug resistant tuberculosis). Three (2.9%) multi-drug resistant tuberculosis and two INH resistant isolates were detected by the PCR-SSCP and sequencing. The sensitivity and specificity of PCR-SSCP for multi-drug resistant isolates were 33% and 100%, respectively.ConclusionsComplete agreement between SSCP and sequencing can indicate that resistance-associated mutations have occurred in other genes except our considered genes.
| S-EPMC4025311 | biostudies-literature
Project description:Osteoarticular tuberculosis (OAT) is an extrapulmonary tuberculosis and accounts for 1 to 3% of all tuberculosis cases. We used an rpoB PCR-plasmid TA cloning-sequencing method to detect and identify tubercle bacilli in surgical specimens from patients suspected of having OAT. By comparing the similarities of the rpoB sequences determined with those in GenBank, Mycobacterium tuberculosis was detected in 23 of 43 samples. Three of the 23 positive samples had mutations at codon 531, which are commonly observed in rifampin-resistant M. tuberculosis strains. Our results suggest that the rpoB PCR-TA cloning-sequencing method developed, which detects M. tuberculosis and which simultaneously determines its rifampin susceptibility, can also be used efficiently for the diagnosis of OAT.
| S-EPMC540102 | biostudies-literature
Project description:Mutations in particular nucleotides of genes coding for drug targets or drug-converting enzymes lead to drug resistance in Mycobacterium tuberculosis. For rapid detection of drug-resistant M. tuberculosis in clinical specimens, a simple and applicable method is needed. Eight TaqMan minor groove binder (MGB) probes, which discriminate one-base mismatches, were designed (dual-probe assay with four reaction tubes). The target of six MGB probes was the rpoB gene, which is involved in rifampin resistance; five probes were designed to detect for mutation sites within an 81-bp hot spot of the rpoB gene, and one probe was designed as a tuberculosis (TB) control outside the rpoB gene hot-spot. We also designed probes to examine codon 315 of katG and codon 306 of embB for mutations associated with resistance to isoniazid and ethambutol, respectively. Our system was M. tuberculosis complex specific, because neither nontuberculous mycobacteria nor bacteria other than mycobacteria reacted with the system. Detection limits in direct and preamplified analyses were 250 and 10 fg of genomic DNA, respectively. The system could detect mutations of the rpoB, katG, and embB genes in DNAs extracted from 45 laboratory strains and from sputum samples of 27 patients with pulmonary TB. This system was much faster (3 h from DNA preparation) than conventional drug susceptibility testing (3 weeks). Results from the dual-MGB-probe assay were consistent with DNA sequencing. Because the dual-probe assay system is simple, rapid, and accurate, it can be applied to detect drug-resistant M. tuberculosis in clinical laboratories.
| S-EPMC525196 | biostudies-literature
Project description:Cycling probe technology (CPT) is a unique and simple method for the detection of specific target sequences. CPT utilizes a chimeric DNA-RNA-DNA probe providing an RNase H-sensitive scissile linkage when bound to a complementary target sequence. For this study a diagnostic assay based on CPT was developed for the detection of the 36-bp direct repeat (DR) region in Mycobacterium tuberculosis. To determine the feasibility of using the DR for detecting M. tuberculosis by CPT, a wide variety of mycobacteria were tested by Southern blot hybridization with three DR probes to verify their specificity. The entire DR region of Mycobacterium bovis 401 was sequenced, and the data were used to design a PCR assay that would allow us to estimate the number of DRs present in a variety of strains. A CPT assay which uses a probe complementary to the DR region was developed and evaluated with synthetic targets and genomic DNA from mycobacteria. In summary, the 36-bp DR provides an attractive target for detecting M. tuberculosis because the sequence is present in high copy numbers in the genome, is specific for the M. tuberculosis complex, and is found in strains that lack IS6110.
| S-EPMC229446 | biostudies-other
Project description:Rapid detection of Mycobacterium tuberculosis complex directly from clinical specimens is critical for patient care. Mycobacterial culture requires days to weeks for results and therefore many laboratories employ rapid molecular methods for the diagnosis of tuberculosis. There are two FDA-cleared molecular assays for the detection of M. tuberculosis complex in the United States and both are cleared for testing of respiratory specimens only. The detection of M. tuberculosis complex in extrapulmonary specimens is often done using laboratory-developed PCR methods. In this work, the verification and subsequent validation of test performance over a decade is detailed for a laboratory-developed PCR assay (MTBRP) that detects M. tuberculosis complex from respiratory and non-respiratory specimens. The assay also provides information about potential isoniazid resistance. The performance of the MTBRP PCR assay was compared to the Cepheid Xpert MTB/RIF assay in acid-fast smear positive and smear negative specimens and mycobacterial culture for acid-fast smear positive specimens. The MTBRP assay demonstrated 99% correlation with the Xpert MTB/RIF assay using 499 respiratory specimens. The performance of the MTBRP PCR assay compared with mycobacterial culture for 867 AFB smear positive respiratory and non-respiratory specimens demonstrated a sensitivity of 100% and a specificity of 99.1%. This work provides longitudinal evidence using real-world clinical laboratory conditions and specimens to demonstrate that laboratory-developed PCR assays such as the MTBRP can provide a rapid and sensitive method for detection of pulmonary and extra-pulmonary tuberculosis from a wide-variety of smear positive specimen sources.
| S-EPMC9679726 | biostudies-literature
Project description:Bovine tuberculosis (bTB) is an ongoing issue in several countries within the European Union. Microbiological culture is the official confirmation technique for the presence of Mycobacterium tuberculosis complex (MTBC) members in bovine tissues, but several methodological issues, such as moderate sensitivity and long incubation times, require the development of more sensitive and rapid techniques. This study evaluates the analytical and diagnostic performance, comparative to culture, of a real-time PCR targeting the MTBC-specific IS6110 transposon using a panel of bovine tissue samples sourced from the Spanish bTB eradication campaign. Robustness and repeatability were evaluated in an interlaboratory trial between European Union National Reference Laboratories. The limit of detection with 95% confidence was established at 65 fg/reaction of purified genomic equivalents. Diagnostic sensitivity (Se) and specificity (Sp) were, respectively, 96.45% and 93.66%, and the overall agreement (κ) was 0.88. Cross-reactivity was detected against two mycobacterial isolates identified as Mycobacterium marinum and "Mycobacterium avium subsp. hominissuis," and whole-genome sequencing (WGS) analysis of the latter isolate revealed an IS6110-like sequence with 83% identity. An identical IS-like element was found in other Mycobacterium avium complex species in the NCBI nucleotide and WGS databases. Despite this finding, this methodology is considered a valuable alternative to culture, and the strategy of use should be defined depending on the control or eradication programs.
| S-EPMC8111149 | biostudies-literature
Project description:Drug-resistant Mycobacterium tuberculosis can be rapidly diagnosed through nucleic acid amplification techniques by analyzing the variations in the associated gene sequences. In the present study, a locked nucleic acid (LNA) probe-based real-time PCR assay was developed to identify the mutations in the rpoB gene associated with rifampin (RFP) resistance in M. tuberculosis. Six LNA probes with the discrimination capability of one-base mismatch were designed to monitor the 23 most frequent rpoB mutations. The target mutations were identified using the probes in a "probe dropout" manner (quantification cycle = 0); thus, the proposed technique exhibited superiority in mutation detection. The LNA probe-based real-time PCR assay was developed in a two-tube format with three LNA probes and one internal amplification control probe in each tube. The assay showed excellent specificity to M. tuberculosis with or without RFP resistance by evaluating 12 strains of common non-tuberculosis mycobacteria. The limit of detection of M. tuberculosis was 10 genomic equivalents (GE)/reaction by further introducing a nested PCR method. In a blind validation of 154 clinical mycobacterium isolates, 142/142 (100%) were correctly detected through the assay. Of these isolates, 88/88 (100%) were determined as RFP susceptible and 52/54 (96.3%) were characterized as RFP resistant. Two unrecognized RFP-resistant strains were sequenced and were found to contain mutations outside the range of the 23 mutation targets. In conclusion, this study established a sensitive, accurate, and low-cost LNA probe-based assay suitable for a four-multiplexing real-time PCR instrument. The proposed method can be used to diagnose RFP-resistant tuberculosis in clinical laboratories.
| S-EPMC4657947 | biostudies-literature
Project description:Mycobacterium tuberculosis is the bacterium that causes tuberculosis (TB), a leading cause of death from infectious disease worldwide. Rapid diagnosis of resistant strains is important for the control of TB. Real-time polymerase chain reaction (RT-PCR) assays may detect all of the mutations that occur in the M. tuberculosis 81-bp core region of the rpoB gene, which is responsible for resistance to rifampin (RIF) and codon 315 of the katG gene and the inhA ribosomal binding site, which are responsible for isoniazid (INH). The goal of this study was to assess the performance of RT-PCR compared to traditional culture-based methods for determining the drug susceptibility of M. tuberculosis. BACTEC TM MGIT TM 960 was used as the gold standard method for phenotypic drug susceptibility testing. Susceptibilities to INH and RIF were also determined by genotyping of katG, inhA and rpoB genes. RT-PCR based on molecular beacons probes was used to detect specific point mutations associated with resistance. The sensitivities of RT-PCR in detecting INH resistance using katG and inhA targets individually were 55% and 25%, respectively and 73% when combined. The sensitivity of the RT-PCR assay in detecting RIF resistance was 99%. The median time to complete the RT-PCR assay was three-four hours. The specificities for tests were both 100%. Our results confirm that RT-PCR can detect INH and RIF resistance in less than four hours with high sensitivity.
| S-EPMC4643165 | biostudies-literature
Project description:ObjectiveTuberculosis diagnosis requires rapid, simple and highly sensitive methods. Clustered regularly interspaced short palindromic repeats (CRISPRs) and associated protein (Cas) systems are increasingly being used for clinical diagnostic applications, due to their high flexibility, sensitivity and specificity. We developed a sensitive Mycobacterium tuberculosis (MTB) complex polymerase chain reaction (PCR)-CRISPR/Cas13a detection method (CRISPR-MTB) and then evaluated its performance in detecting MTB in clinical specimens.MethodsThe conserved MTB IS1081 sequence was used to design CRISPR-derived RNAs (crRNAs) and T7 promoter sequencing-containing PCR primers for use in the CRISPR-MTB assay, then assay performance was evaluated using 401 clinical specimens.ResultsThe CRISPR-MTB assay provided a low limit of detection of 1 target sequence copy/μL and excellent specificity. Furthermore, use of the assay to detect MTB in bronchoalveolar lavage fluid (BALF), sputum and pus samples provided superior sensitivity (261/268, 97.4%) as compared to sensitivities of acid-fast bacilli (130/268, 48.5%) and mycobacterial culture (192/268, 71.6%) assays, and comparable or greater sensitivity to that of GeneXpert MTB/RIF (260/268, 97.0%).ConclusionThe CRISPR-MTB assay, which provides excellent sensitivity and specificity for MTB detection in sputum, BALF and pus samples, is a viable alternative to conventional tests used to diagnose TB in resource-limited settings.
| S-EPMC9935578 | biostudies-literature