Filled and empty states of Zn-TPP films deposited on Fe(001)-p(1×1)O.
Ontology highlight
ABSTRACT:
SUBMITTER: Bussetti G
PROVIDER: S-EPMC5238660 | biostudies-literature | 2016
REPOSITORIES: biostudies-literature
Publications
Filled and empty states of Zn-TPP films deposited on Fe(001)-<i>p</i>(1×1)O.
Bussetti Gianlorenzo G Calloni Alberto A Yivlialin Rossella R Picone Andrea A Bottegoni Federico F Finazzi Marco M
Beilstein journal of nanotechnology 20161027
Zn-tetraphenylporphyrin (Zn-TPP) was deposited on a single layer of metal oxide, namely an Fe(001)-<i>p</i>(1×1)O surface. The filled and empty electronic states were measured by means of UV photoemission and inverse photoemission spectroscopy on a single monolayer and a 20 monolayer thick film. The ionization energy and the electron affinity of the organic film were deduced and the interface dipole was determined and compared with data available in the literature. ...[more]
Similar Datasets
Project description:Here we first report results of the start of the solid-state reaction at the Rh/Fe(001) interface and the structural and magnetic phase transformations in 52Rh/48Fe(001), 45Rh/55Fe(001), 68Rh/32Fe(001) bilayers from room temperature to 800 °C. For all bilayers the non-magnetic nanocrystalline phase with a B2 structure (nfm-B2) is the first phase that is formed on the Rh/Fe(001) interface near 100 °C. Above 300 °C, without changing the nanocrystalline B2 structure, the phase grows into the low-magnetization modification αl' (MSl ~ 825 emu/cm3) of the ferromagnetic α' phase which has a reversible αl' ↔ α" transition. After annealing 52Rh/48Fe(001) bilayers above 600 °C the αl' phase increases in grain size and either develops into αh' with high magnetization (MSh ~ 1,220 emu/cm3) or remains in the αl' phase. In contrast to αl', the αh' ↔ α" transition in the αh' films is completely suppressed. When the annealing temperature of the 45Rh/55Fe(001) samples is increased from 450 to 800 °C the low-magnetization nanocrystalline αl' films develop into high crystalline perfection epitaxial αh'(001) layers, which have a high magnetization of ~ 1,275 emu/cm3. αh'(001) films do not undergo a transition to an antiferromagnetic α" phase. In 68Rh/32Fe(001) samples above 500 °C non-magnetic epitaxial γ(001) layers grow on the Fe(001) interface as a result of the solid-state reaction between the epitaxial αl'(001) and polycrystalline Rh films. Our results demonstrate not only the complex nature of chemical interactions at the low-temperature synthesis of the nfm-B2 and αl' phases in Rh/Fe(001) bilayers, but also establish their continuous link with chemical mechanisms underlying reversible αl' ↔ α" transitions.
| S-EPMC7331715 | biostudies-literature
Project description:Temporal perceptual learning (TPL) refers to improved temporal performance as a result of training with sub-second intervals. Most studies on TPL have focused on empty intervals (i.e. intervals marked by two brief stimuli); however, scholars have suggested that filled intervals (i.e. intervals presented as continuous sensory inputs) might have different underlying mechanisms. Therefore, the current study aimed to test whether empty and filled intervals yield similar TPL performance and whether such learning effects could transfer mutually. To this end, we trained two groups of participants with empty and filled intervals of 200 ms for four days, respectively. We found that the empty-interval group clearly improved their timing performances after training, and such an effect transferred to filled intervals of 200 ms. By contrast, the filled-interval group had neither learning nor transfer effect. Our results further shed light on the distinct mechanisms between empty and filled intervals in time perception while simultaneously replicating the classical findings on TPL involving empty intervals.
| S-EPMC9198236 | biostudies-literature
Project description:The temperature dependence of the crystalline phase of (nitrosyl)(tetraphenylporphinato)iron(II), [Fe(TPP)(NO)], has been explored over the temperature range of 33-293 K. The crystalline complex is found in the tetragonal crystal system at higher temperatures and in the triclinic crystal system at lower temperatures. In the tetragonal system, the axial ligand is strongly disordered, with the molecule having crystallographically required 4/m symmetry, leading to eight distinct positions of the single nitrosyl oxygen atom. The phase transition to the triclinic crystal system leads to a partial ordering with the molecule now having inversion symmetry and disorder of the axial nitrosyl ligand over only two positions. The increase in ordering allows subtle molecular geometry features to be observed; in particular, an off-axis tilt of the Fe-N(NO) bond from the heme normal is apparent. The transition of the reversible phase change begins at about 250 K. This transition has been confirmed by both X-ray diffraction studies and a differential scanning calorimetry study.
| S-EPMC2680005 | biostudies-literature
Project description:Epsilon ferrite (ε-Fe2O3) is a metastable phase of iron(III) oxide, intermediate between maghemite and hematite. It has recently attracted interest because of its magnetocrystalline anisotropy, which distinguishes it from the other polymorphs, and results in a gigantic coercive field and a natural ferromagnetic resonance frequency in the THz range. Moreover, it possesses a polar crystal structure, making it a potential ferroelectric, hence a potential multiferroic. Due to the need of size confinement to stabilize the metastable phase, ε-Fe2O3 has been synthesized mainly as nanoparticles. However, to favor integration in devices, and take advantage of its unique functional properties, synthesis as epitaxial thin films is desirable. In this paper, we report the growth of ε-Fe2O3 as epitaxial thin films on (100)-oriented yttrium-stabilized zirconia substrates. Structural characterization outlined the formation of multiple in-plane twins, with two different epitaxial relations to the substrate. Transmission electron microscopy showed how such twins develop in a pillar-like structure from the interface to the surface. Magnetic characterization confirmed the high magnetocrystalline anisotropy of our film and revealed the presence of a secondary phase which was identified as the well-known magnetite. Finally, angular analysis of the magnetic properties revealed how the presence of twins impacts their azimuthal dependence.
| S-EPMC5473884 | biostudies-literature
Project description:Anatase films exhibiting ~100% (001) reactive facets at the surface were grown hydrothermally on gold substrate from a homogeneous solution of TiF(4) and NaF. In addition to NaF, it was found that TiO(2) films with very similar properties could be prepared with the fluoride salts LiF, CsF, HF, NH(4)F, and N(CH(2)CH(3))(4)F. The polycrystalline anatase films are continuous, approximately 1 ?m thick, and evenly coat the substrate. The surface grain size is ~400 nm. Grazing angle XRD measurements show that the films exhibit a high degree of preferred orientation with the c-axis normal to the substrate surface. SEM images reveal that the grains span the thickness of the films. Annealing the films at 500 °C removes fluorine and causes crystallites within the grains to restructure as shown by SEM, XRD, and Raman spectroscopy. Supported anatase films grown from this one-pot method may serve as oxidative photocatalysts and electrodes for photoelectrochemical applications such as solar cells and hydrogen evolution.
| S-EPMC3404747 | biostudies-literature
Project description:Due to their versatile and unique properties, tantalum-based thin films have been extensively studied. However, tantalum is susceptible to oxidation due to its higher chemical activity, which is crucial regardless of whether oxidations of Ta are beneficial or detrimental. Therefore, the oxidation of Ta during material processing, especially without conscious means, should be taken seriously. In this study, pure Ta films were fabricated by magnetron sputtering under set procedure parameters. The effects of base pressure and substrate temperature on the degree of oxidation of Ta films were investigated. The results revealed that the magnitude of the base pressure directly affects the oxidation state of the as-deposited Ta films. When preferably avoiding the oxidation of sputtered Ta films, the base pressure should be controlled below 4.4 × 10-4 Pa. The substrate temperature has little effect on the oxidation state of the as-deposited Ta films under a base pressure ranging from about 10-2 Pa to 10-4. We hope that this study can provide some references for controlling the oxidation states of Ta involved in relevant film preparation.
| S-EPMC10707248 | biostudies-literature
Project description:The interplay of superconductivity and magnetism is a subject of ongoing interest, stimulated most recently by the discovery of Fe-based superconductivity and the recognition that spin-fluctuations near a magnetic quantum critical point may provide an explanation for the superconductivity and the order parameter. Here we investigate magnetism in the Na filled Fe-based skutterudites using first principles calculations. NaFe4Sb12 is a known ferromagnet near a quantum critical point. We find a ferromagnetic metallic state for this compound driven by a Stoner type instability, consistent with prior work. In accord with prior work, the magnetization is overestimated, as expected for a material near an itinerant ferromagnetic quantum critical point. NaFe4P12 also shows a ferromagnetic instability at the density functional level, but this instability is much weaker than that of NaFe4Sb12, possibly placing it on the paramagnetic side of the quantum critical point. NaFe4As12 shows intermediate behavior. We also present results for skutterudite FeSb3, which is a metastable phase that has been reported in thin film form.
| S-EPMC4450575 | biostudies-other
Project description:The structural, optical, and electrical properties of ZnO are intimately intertwined. In the present work, the structural and transport properties of 100 nm thick polycrystalline ZnO films obtained by atomic layer deposition (ALD) at a growth temperature (Tg) of 100-300 °C were investigated. The electrical properties of the films showed a dependence on the substrate (a-Al2O3 or Si (100)) and a high sensitivity to Tg, related to the deviation of the film stoichiometry as demonstrated by the RT-Hall effect. The average crystallite size increased from 20-30 nm for as grown samples to 80-100 nm after rapid thermal annealing, which affects carrier scattering. The ZnO layers deposited on silicon showed lower strain and dislocation density than on sapphire at the same Tg. The calculated half crystallite size (D/2) was higher than the Debye length (LD) for all as grown and annealed ZnO films, except for annealed ZnO/Si films grown within the ALD window (100-200 °C), indicating different homogeneity of charge carrier distribution for annealed ZnO/Si and ZnO/a-Al2O3 layers. For as grown films the hydrogen impurity concentration detected via secondary ion mass spectrometry (SIMS) was 1021 cm-3 and was decreased by two orders of magnitude after annealing, accompanied by a decrease in Urbach energy in the ZnO/a-Al2O3 layers.
| S-EPMC8307850 | biostudies-literature
Project description:We report on a new route to grow epitaxial copper (Cu) ultra-thin films (up to 150 nm thick) at ambient temperature on Si(001) wafers covered with native oxide without any prior chemical etching or plasma cleaning of the substrate. It consists of a single-step deposition process using high power impulse magnetron sputtering (HiPIMS) and substrate biasing. For a direct current (DC) substrate bias voltage of -130 V, Cu/Si heteroepitaxial growth is achieved by HiPIMS following the Cu(001) [100]//Si(001) [110] orientation, while under the same average deposition conditions, but using conventional DC magnetron sputtering, polycrystalline Cu films with [111] preferred orientation are deposited. In addition, the intrinsic stress has been measured in situ during growth by real-time monitoring of the wafer curvature. For this particular HiPIMS case, the stress is slightly compressive (-0.1 GPa), but almost fully relaxes after growth is terminated. As a result of epitaxy, the Cu surface morphology exhibits a regular pattern consisting of square-shaped mounds with a lateral size of typically 150 nm. For all samples, X-ray diffraction pole figures and scanning/transmission electron microscopy reveal the formation of extensive twinning of the Cu {111} planes.
| S-EPMC5431785 | biostudies-literature
Project description:In this article, we used a two-step chemical vapor deposition (CVD) method to synthesize methylammonium lead-tin triiodide perovskite films, MAPb1-xSnxI3, with x varying from 0 to 1. We successfully controlled the concentration of Sn in the perovskite films and used Rutherford backscattering spectroscopy (RBS) to quantify the composition of the precursor films for conversion into perovskite films. According to the RBS results, increasing the SnCl2 source amount in the reaction chamber translate into an increase in Sn concentration in the films. The crystal structure and the optical properties of perovskite films were examined by X-ray diffraction (XRD) and UV-Vis spectrometry. All the perovskite films depicted similar XRD patterns corresponding to a tetragonal structure with I4cm space group despite the precursor films having different crystal structures. The increasing concentration of Sn in the perovskite films linearly decreased the unit volume from about 988.4 Å3 for MAPbI3 to about 983.3 Å3 for MAPb0.39Sn0.61I3, which consequently influenced the optical properties of the films manifested by the decrease in energy bandgap (Eg) and an increase in the disorder in the band gap. The SEM micrographs depicted improvements in the grain size (0.3-1 µm) and surface coverage of the perovskite films compared with the precursor films.
| S-EPMC8269519 | biostudies-literature