Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Synthesis of Microspherical LiFePO?-Carbon Composites for Lithium-Ion Batteries.

ABSTRACT: This paper reports an "all in one" procedure to produce mesoporous, micro-spherical LiFePO? composed of agglomerated crystalline nanoparticles. Each nanoparticle is individually coated with a thin glucose-derived carbon layer. The main advantage of the as-synthesized materials is their good performance at high charge-discharge rates. The nanoparticles and the mesoporosity guarantee a short bulk diffusion distance for both lithium ions and electrons, as well as additional active sites for the charge transfer reactions. At the same time, the thin interconnected carbon coating provides a conductive framework capable of delivering electrons to the nanostructured LiFePO?.

SUBMITTER: Yu L

PROVIDER: S-EPMC5304656 | biostudies-literature | 2013 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Synthesis of Microspherical LiFePO₄-Carbon Composites for Lithium-Ion Batteries.

Yu Linghui L Cai Dandan D Wang Haihui H Titirici Maria-Magdalena MM

Nanomaterials (Basel, Switzerland) 20130722 3

This paper reports an "all in one" procedure to produce mesoporous, micro-spherical LiFePO₄ composed of agglomerated crystalline nanoparticles. Each nanoparticle is individually coated with a thin glucose-derived carbon layer. The main advantage of the as-synthesized materials is their good performance at high charge-discharge rates. The nanoparticles and the mesoporosity guarantee a short bulk diffusion distance for both lithium ions and electrons, as well as additional active sites for the cha ...[more]

PMID: 28348343

Similar Datasets

Lithium Titanate/Carbon Nanotubes Composites Processed by Ultrasound Irradiation as Anodes for Lithium Ion Batteries.

Project description:In this work, lithium titanate nanoparticles (nLTO)/single wall carbon nanotubes (SWCNT) composite electrodes are prepared by the combination of an ultrasound irradiation and ultrasonic spray deposition methods. It was found that a mass fraction of 15% carbon nanotubes optimizes the electrochemical performance of nLTO electrodes. These present capacities as high as 173, 130, 110 and 70?mAh.g-1 at 0.1C, 1C, 10C and 100C, respectively. Moreover, after 1000 cycles at 1C, the nLTO/SWCNT composites present a capacity loss of just 9% and a Coulombic efficiency of 99.8%. Therefore, the presented methodology might be extended to other suitable active materials in order to manufacture binder free electrodes with optimal energy storage capabilities.

| S-EPMC5548767 | biostudies-literature

Biomimetic Synthesis of Polydopamine Coated ZnFe2O4 Composites as Anode Materials for Lithium-Ion Batteries.

Project description:Metal oxides as anode materials for lithium storage suffer from poor cycling stability due to their conversion mechanisms. Here, we report an efficient biomimetic method to fabricate a conformal coating of conductive polymer on ZnFe2O4 nanoparticles, which shows outstanding electrochemical performance as anode material for lithium storage. Polydopamine (PDA) film, a bionic ionic permeable film, was successfully coated on the surfaces of ZnFe2O4 particles by the self-polymerization of dopamine in the presence of an alkaline buffer solution. The thickness of PDA coating layer was tunable by controlling the reaction time, and the obtained ZnFe2O4/PDA sample with 8 nm coating layer exhibited an outstanding electrochemical performance in terms of cycling stability and rate capability. ZnFe2O4/PDA composites delivered an initial discharge capacity of 2079 mAh g-1 at 1 A g-1 and showed a minimum capacity decay after 150 cycles. Importantly, the coating layer improved the rate capability of composites compared to that of its counterpart, the bare ZnFe2O4 particle materials. The outstanding electrochemical performance was because of the buffering and protective effects of the PDA coating layer, which could be a general protection strategy for electrode materials in lithium-ion batteries.

| S-EPMC6044608 | biostudies-literature

Graphitized Carbon Xerogels for Lithium-Ion Batteries.

Project description:Carbon xerogels with different macropore sizes and degrees of graphitization were evaluated as electrodes in lithium-ion batteries. It was found that pore structure of the xerogels has a marked effect on the degree of graphitization of the final carbons. Moreover, the incorporation of graphene oxide to the polymeric structure of the carbon xerogels also leads to a change in their carbonaceous structure and to a remarkable increase in the graphitic phase of the samples studied. The sample with the highest degree of graphitization (i.e., hybrid graphene-carbon xerogel) displayed the highest capacity and stability over 100 cycles, with values even higher than those of the commercial graphite SLP50 used as reference.

| S-EPMC6981815 | biostudies-literature

Sulfur-Doped and Bio-Resin-Derived Hard Carbon@rGO Composites as Sustainable Anodes for Lithium-Ion Batteries.

Project description:Hard carbon derived from fossil products is widely used as anode material for lithium-ion batteries. However, there are still several main shortcomings such as high cost, and poor rate performance, which restrict its wide application. Then tremendous efforts have been devoted to developing biomaterials in the battery applications. Recently, especially agricultural and industrial by-products have attracted much attention due to the electric double-layer capacitors. Herein, we report the sulfur-doped hard carbon (SHC) materials from the tannin-furanic resins (TF-Resin) of the derived agricultural by-products, followed by enveloping rGO on its surface through the hexadecyl trimethyl ammonium bromide. SHC provides sites for the storage of lithium, while the rGO layers can offer a highly conductive matrix to achieve good contact between particles and promote the diffusion and transport of ions and electrons. As a result, the SHC@rGO shows excellent lithium storage performance with initial discharge capacity around 746 mAh g-1 at a current density of 50 mA g-1, and shows superb stability keeping capacity retention of 91.9% after 200 cycles. Moreover, even at a high current density of 2,000 mAg-1, SHC@rGO still delivers a specific capacity of 188 mAg-1. These desired promising properties are active to the implement in the possible practical application.

| S-EPMC7142261 | biostudies-literature

MOF-Derived ZnSe/N-Doped Carbon Composites for Lithium-Ion Batteries with Enhanced Capacity and Cycling Life.

Project description:In this work, three different morphologies of ZnSe/N-doped carbon (NC) composites are synthesized using ZIF-8 by a facile calcination process. By adjusting the particle size of precursor ZIF-8, the morphology and size of the product ZnSe/NC can be controlled. The as-prepared ZnSe/NC composites show excellent cyclic stability and rate capability as anode materials in lithium-ion batteries (LIBs). Especially, the as-obtained ZnSe/NC-300 exhibits reversible discharge capacity of 724.4 mAh g-1 after 500?cycles at 1 A g-1. The introduction of N-doped carbon can significantly improve the conductivity of ZnSe and promotes the transfer of electrons. And mesoporous structure is conducive to the penetration of electrolyte in active materials, increases the contact area, and alleviates the volume expansion during the charge-discharge process. Thus, ZnSe/NC composites provide a new insight into the development of anode materials for next-generation high-performance LIBs.

| S-EPMC6629758 | biostudies-literature

Facile Synthesis of Non-Graphitizable Polypyrrole-Derived Carbon/Carbon Nanotubes for Lithium-ion Batteries.

Project description:Graphite is usually used as an anode material in the commercial lithium ion batteries (LIBs). The relatively low lithium storage capacity of 372 mAh g(-1) and the confined rate capability however limit its large-scale applications in electrical vehicles and hybrid electrical vehicles. As results, exploring novel carbon-based anode materials with improved reversible capacity for high-energy-density LIBs is urgent task. Herein we present TNGC/MWCNTs by synthesizing tubular polypyrrole (T-PPy) via a self-assembly process, then carbonizing T-PPy at 900 °C under an argon atmosphere (TNGC for short) and finally mixing TNGC with multi-walled carbon nanotubes (MWCNTs). As for TNGC/MWCNTs, the discharge capacity of 561 mAh g(-1) is maintained after 100 cycles at a current density of 100 mA g(-1). Electrochemical results demonstrate that TNGC/MWCNTs can be considered as promising anode materials for high-energy-density LIBs.

| S-EPMC4725918 | biostudies-other

Amorphous cobalt silicate nanobelts@carbon composites as a stable anode material for lithium ion batteries.

Project description:During the past decade, tremendous attention has been given to the development of new electrode materials with high capacity to meet the requirements of electrode materials with high energy density in lithium ion batteries. Very recently, cobalt silicate has been proposed as a new type of high capacity anode material for lithium ion batteries. However, the bulky cobalt silicate demonstrates limited electrochemical performance. Nanostructure engineering and carbon coating represent two promising strategies to improve the electrochemical performance of electrode materials. Herein, we developed a template method for the synthesis of amorphous cobalt silicate nanobelts which can be coated with carbon through the deposition and thermal decomposition of phenol formaldehyde resin. Tested as an anode material, the amorphous cobalt silicate nanobelts@carbon composites exhibit a reversible high capacity of 745 mA h g-1 at a current density of 100 mA g-1, and a long life span of up to 1000 cycles with a stable capacity retention of 480 mA h g-1 at a current density of 500 mA g-1. The outstanding electrochemical performance of the composites indicates their high potential as an anode material for lithium ion batteries. The results here are expected to stimulate further research into transition metal silicate nanostructures for lithium ion battery applications.

| S-EPMC5510008 | biostudies-other

A universal synthetic route to carbon nanotube/transition metal oxide nano-composites for lithium ion batteries and electrochemical capacitors.

Project description:We report a simple synthetic approach to coaxially grow transition metal oxide (TMO) nanostructures on carbon nanotubes (CNT) with ready control of phase and morphology. A thin (~4?nm) sulfonated-polystyrene (SPS) pre-coating is essential for the deposition of transition metal based materials. This layer has abundant sulfonic groups (-SO3-) that can effectively attract Ni2+, Co2+, Zn2+ ions through electrostatic interaction and induce them via hydrolysis, dehydration and recrystallization to form coaxial (NiO, Co3O4, NiCoO2 and ZnCo2O4) shells and a nanosheet-like morphology around CNT. These structures possess a large active surface and enhanced structural robustness when used as electrode materials for lithium-ion batteries (LIBs) and electrochemical capacitors (ECs). As electrodes for LIBs, the ZnCo2O4@CNT material shows extremely stable cycling performance with a discharge capacity of 1068?mAh g-1 after 100 cycles at a current density of 400?mAg-1. For EC applications, the NiCoO2@CNT exhibits a high capacitance of 1360?Fg-1 at current densities of 10?Ag-1 after 3000 cycles and an overall capacitance loss of only 1.4%. These results demonstrate the potential of such hybrid materials meeting the crucial requirements of cycling stability and high rate capability for energy conversion and storage devices.

| S-EPMC5123580 | biostudies-literature

Lithium Sulfide-Carbon Composites via Aerosol Spray Pyrolysis as Cathode Materials for Lithium-Sulfur Batteries.

Project description:We demonstrate a new technique to produce lithium sulfide-carbon composite (Li2S-C) cathodes for lithium-sulfur batteries via aerosol spray pyrolysis (ASP) followed by sulfurization. Specifically, lithium carbonate-carbon (Li2CO3-C) composite nanoparticles are first synthesized via ASP from aqueous solutions of sucrose and lithium salts including nitrate (LiNO3), acetate (CH3COOLi), and Li2CO3, respectively. The obtained Li2CO3-C composites are subsequently converted to Li2S-C through sulfurization by reaction to H2S. Electrochemical characterizations show excellent overall capacity and cycle stability of the Li2S-C composites with relatively high areal loading of Li2S and low electrolyte/Li2S ratio. The Li2S-C nanocomposites also demonstrate clear structure-property relationships.

| S-EPMC6190730 | biostudies-literature

Heteroatom Doped-Carbon Nanospheres as Anodes in Lithium Ion Batteries.

Project description:Long cycle performance is a crucial requirement in energy storage devices. New formulations and/or improvement of "conventional" materials have been investigated in order to achieve this target. Here we explore the performance of a novel type of carbon nanospheres (CNSs) with three heteroatom co-doped (nitrogen, phosphorous and sulfur) and high specific surface area as anode materials for lithium ion batteries. The CNSs were obtained from carbonization of highly-crosslinked organo (phosphazene) nanospheres (OPZs) of 300 nm diameter. The OPZs were synthesized via a single and facile step of polycondensation reaction between hexachlorocyclotriphosphazene (HCCP) and 4,4'-sulphonyldiphenol (BPS). The X-ray Photoelectron Spectroscopy (XPS) analysis showed a high heteroatom-doping content in the structure of CNSs while the textural evaluation from the N? sorption isotherms revealed the presence of micro- and mesopores and a high specific surface area of 875 m²/g. The CNSs anode showed remarkable stability and coulombic efficiency in a long charge-discharge cycling up to 1000 cycles at 1C rate, delivering about 130 mA·h·g-1. This study represents a step toward smart engineering of inexpensive materials with practical applications for energy devices.

| S-EPMC5456559 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data