Browse
Submit Data
Databases
API
Help

Dataset Information

10 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Crystal structure of the solid solution Ba_8.35Pb_0.65(B₃O₆)₆.

ABSTRACT: Single crystals of lead barium borate, Ba_8.35Pb_0.65(B₃O₆)₆, octabarium lead(II) hexa-kis-(triborate), have been obtained by spontaneous nucleation from a high-temperature melt. Its three-dimensional structure is constructed on the basis of a BaO₉ polyhedron, a (Pb/Ba)O₆ octa-hedron (occupancy ratio Pb:Ba = 0.216:0.784) and a condensed B₃O₆ ring anion. In the crystal, the planar B₃O₆ anions are stacked in an alternating fashion with Ba and (Pb/Ba) atoms along [001]. A comparison is made with the structures of related solid solutions in the system Ba/Pb/B/O.

SUBMITTER: Zhao W

PROVIDER: S-EPMC5347051 | biostudies-literature | 2017 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Crystal structure of the solid solution Ba8.35Pb0.65(B3O6)6.

Zhao Wenwu W

Acta crystallographica. Section E, Crystallographic communications 20170214 Pt 3

Single crystals of lead barium borate, Ba8.35Pb0.65(B3O6)6, octabarium lead(II) hexa-kis-(triborate), have been obtained by spontaneous nucleation from a high-temperature melt. Its three-dimensional structure is constructed on the basis of a BaO9 polyhedron, a (Pb/Ba)O6 octa-hedron (occupancy ratio Pb:Ba = 0.216:0.784) and a condensed B3O6 ring anion. In the crystal, the planar B3O6 ...[more]

PMID: 28316806

Similar Datasets

Crystal structure of Ba2Co(BO3)2.

Project description:Single crystals of dibarium cobalt(II) bis-(orthoborate), Ba2Co(BO3)2, have been obtained from the melt. The crystal structure is composed of two isolated (BO3)3- triangles linked to Co2+ cations. The resulting [CoO5] square pyramids and the borate anions make up branched rows extending parallel to [010]. The barium cations occupy two sites in the voids of this arrangement and exhibit coordination numbers of nine each. A comparison with the structures of other A 2 M(BO3)2 compounds reveals a unique five-coordination of the small metal M in the title compound instead of four- or six-coordination for the other A 2 M(BO3)2 compounds with M = Cu, Zn, Mg, Ca, or Cd.

| S-EPMC6399684 | biostudies-literature

Crystal structure of the solid solution (Sr1.65Pb0.35)Al6O11.

Project description:The title compound, di(strontium/lead) hexa-aluminate, is a member of the solid solution series (Sr2-x Pb x )Al6O11. It contains two statistically occupied M (2+) (M = Sr, Pb) sites [both with site symmetries ..m; Sr:Pb occupancy ratios = 0.756?(2):0.244?(2) and 0.8968?(19):0.1032?(19)] that are located in the voids of an aluminate framework. The M (2+) sites are surrounded by six and seven O atoms, respectively, if a cut-off M-O distance of 3?Å is chosen, resulting in considerably distorted MO x polyhedra. The aluminate framework consists of three AlO6 octa-hedra (two with point-group symmetries ..2/m and one with ..2) sharing edges to form partially filled layers extending parallel to (100) and located at x = 0, 0.5. Adjacent AlO6 layers are linked by a network made up from two crystallographically different AlO4 tetra-hedra by sharing corners.

| S-EPMC4186198 | biostudies-literature

Low-Pb High-Piezoelectric Ceramic System (1-x)Ba(Zr0.18Ti0.82)O3-x(Ba0.78Pb0.22)TiO3.

Project description:Piezoelectric materials, especially Pb-based piezoelectric materials, are widely used in the key components of sensors, actuators, and transducers. Due to the rising concern of the toxicity of Pb, global legislation has been adopted to restrict the use of Pb. Given that the available Pb-free piezoelectric materials cannot replace the Pb-based ones for various reasons, we designed and fabricated a low-Pb piezoelectric solid-solution ceramic system, (1-x)Ba(Zr0.18Ti0.82)O3-x(Ba0.78Pb0.22)TiO3 (denoted as BZ0.18T-xBP0.22T herein). The crystal structure, ferroelectric, dielectric, and piezoelectric properties of the BZ0.18T-xBP0.22T system were systematically studied. With the increase in BP0.22T content, the structure of the samples changed from a rhombohedral phase to a tetragonal phase; the intermediate composition x = 0.5 was located at the morphotropic phase boundary of the system and corresponded to the state with the coexistence of the rhombohedral and tetragonal phases. Moreover, x = 0.5 exhibited the optimum comprehensive properties among all the samples, with a piezoelectric coefficient d33 of 240 pC/N, a maximum dielectric temperature Tm of 121.1°C, and a maximum polarization Pm of 15 μC/cm2. Our work verifies the validity of the route to design low-Pb high-piezoelectric materials and may stimulate the interests for exploring new low-Pb high-performance ferroelectric and piezoelectric materials.

| S-EPMC9322182 | biostudies-literature

Ba5(IO6)2: crystal structure evolution from room temperature to 80 K.

Project description:The crystal structure of Ba5(IO6)2, penta-barium bis-(orthoperiodate), has been re-investigated at room temperature based on single-crystal X-ray diffraction data. In comparison with a previous crystal structure determination by the Rietveld method, an improved precision of the structural parameters was achieved. Additionally, low-temperature measurements allowed the crystal structure evolution to be studied down to 80 K. No evidence of structural transition was found even at the lowest temperature. Upon cooling, the lattice contraction is more pronounced along the b axis. This contraction is found to be inhomogeneous along different crystallographic axes. The inter-atomic distances between different Ba atoms reduce drastically with lowering temperature, resulting in a closer packing around the IO6 octa-hedra, which remain largely unaffected.

| S-EPMC8183445 | biostudies-literature

Effect of strontium on Nd doped Ba1-x Sr x Ce0.65Zr0.25Nd0.1O3-? proton conductor as an electrolyte for solid oxide fuel cells.

Project description:This paper investigated the Sr doping effect on the microstructure, chemical stability, and conductivity of Ba1-x Sr x Ce0.65Zr0.25Nd0.1O3-? (0 ? x ? 0.2) electrolyte prepared by sol-gel method. The lattice constants and unit cell volumes were found to decrease as Sr atomic percentage increased in accordance with the Vegard law, confirming the formation of solid solution. Incorporation of Sr into the composition resulted in smaller grains besides suppressing the formation of secondary phases of SrCeO3. Among the synthesized samples BaCe0.65Zr0.25Nd0.1O3-? pellet with orthorhombic structure showed highest conductivity with a value of 2.08 × 10-3 S/cm(dry air) and 2.12 × 10-3 S/cm (wet air with 3% relative humidity) at 500 °C due to its smaller lattice volume, larger grain size, and lower activation energy that led to excessive increase in conductivity. Ba0.8Sr0.2Ce0.65Zr0.25Nd0.1O3-? recorded lower conductivity with a value of 4.62 × 10-4 S/cm (dry air) and 4.83 × 10-4 S/cm (wet air with 3% relative humidity) at 500 °C than Sr undoped but exhibited better chemical stability when exposed to air and H2O atmospheres. Comparisons with the literature showed the importance of the synthesis method on the properties of the powders. Hence this composition can be a promising electrolyte if all the values such as sintering temperature, Sr dopant concentration, and time are proportionally controlled.

| S-EPMC5292655 | biostudies-literature

Crystal structures of the triple perovskites Ba2K2Te2O9 and Ba2KNaTe2O9, and redetermination of the double perovskite Ba2CaTeO6.

Project description:Single crystals of Ba2K2Te2O9 (dibarium dipotassium nona-oxidoditellurate), (I), Ba2KNaTe2O9 (dibarium potassium sodium nona-oxidoditellurate), (II), and Ba2CaTeO6 (dibarium calcium hexa-oxidotellurate), (III), were obtained from KNO3/KI or KNO3/NaNO3 flux syntheses in platinum crucibles for (I) and (II), or porcelain crucibles for (III). (I) and (II) are isotypic and are members of triple perovskites with general formula A2[12co]A'[12co]B2[6o]B'[6o]O9. They crystallize in the 6H-BaTiO3 structure family in space-group type P63/mmc, with the A, A', B and B' sites being occupied by K, Ba, Te and a second Ba in (I), and in (II) by mixed-occupied (Ba/K), Ba, Te and Na sites, respectively. (III) adopts the A2[12co]B'[6o]B''[6o]O6 double perovskite structure in space-group type Fmm, with Ba, Ca and Te located on the A, B' and B'' sites, respectively. The current refinement of (III) is based on single-crystal X-ray data. It confirms the previous refinement from X-ray powder diffraction data [Fu et al. (2008). J. Solid State Chem.181, 2523-2529], but with higher precision.

| S-EPMC6038633 | biostudies-literature

Tuning Surface Structure of Pd3Pb/Pt n Pb Nanocrystals for Boosting the Methanol Oxidation Reaction.

Project description:Developing an efficient Pt-based electrocatalyst with well-defined structures for the methanol oxidation reaction (MOR) is critical, however, still remains a challenge. Here, a one-pot approach is reported for the synthesis of Pd3Pb/Pt n Pb nanocubes with tunable Pt composition varying from 3.50 to 2.37 and 2.07, serving as electrocatalysts toward MOR. Their MOR activities increase in a sequence of Pd3Pb/Pt3.50Pb << Pd3Pb/Pt2.07Pb < Pd3Pb/Pt2.37Pb, which are substantially higher than that of commercial Pt/C. Specifically, Pd3Pb/Pt2.37Pb electrocatalysts achieve the highest specific (13.68 mA cm-2) and mass (8.40 A mgPt -1) activities, which are ≈8.8 and 6.8 times higher than those of commercial Pt/C, respectively. Structure characterizations show that Pd3Pb/Pt2.37Pb and Pd3Pb/Pt2.07Pb are dominated by hexagonal-structured PtPb intermetallic phase on the surface, while the surface of Pd3Pb/Pt3.50Pb is mainly composed of face-centered cubic (fcc)-structured Pt x Pb phase. As such, hexagonal-structured PtPb phase is much more active than the fcc-structured Pt x Pb one toward MOR. This demonstration is supported by density functional theory calculations, where the hexagonal-structured PtPb phase shows the lowest adsorption energy of CO. The decrease in CO adsorption energy and structural stability also endows Pd3Pb/Pt n Pb electrocatalysts with superior durability relative to commercial Pt/C.

| S-EPMC6918111 | biostudies-literature

Pressure-induced Pb-Pb bonding and phase transition in Pb2SnO4.

Project description:High-pressure single-crystal to 20 GPa and powder diffraction measurements to 50 GPa, show that the structure of Pb2SnO4 strongly distorts on compression with an elongation of one axis. A structural phase transition occurs between 10 GPa and 12 GPa, with a change of space group from Pbam to Pnam. The resistivity decreases by more than six orders of magnitude when pressure is increased from ambient conditions to 50 GPa. This insulator-to-semiconductor transition is accompanied by a reversible appearance change from transparent to opaque. Density functional theory-based calculations show that at ambient conditions the channels in the structure host the stereochemically-active Pb 6s2 lone electron pairs. On compression the lone electron pairs form bonds between Pb2+ ions. Also provided is an assignment of irreducible representations to the experimentally observed Raman bands.

| S-EPMC8788844 | biostudies-literature

Structure, Shift in Redox Potential and Li-Ion Diffusion Behavior in Favorite LiFe1?xVxPO4F Solid-Solution Cathodes.

Project description:Solid-solution Li-ion cathode materials transform through a single-phase reaction thus leading to a long-term structural stability and improved cyclability. In this work, a two- to single-phase Li+-extraction/insertion mechanism is studied through tuning the stoichiometry of transition-metal Fe/V cations to trigger a transition in the chemical reactivity path. Tavorite triclinic-structured LiFe1-xVxPO4F (x = 0, 0.1, 0.3, 0.5, 0.7, 0.9, 1) solid-solution powders were prepared by a facile one-step solid-state method from hydrothermal-synthesized and commercial raw materials. The broad shape of cyclic voltammetry (CV) peaks, sloping charge/discharge profiles and sloping open-circuit voltage (OCV) profiles were observed in LiFe1-xVxPO4F solid-solution cathodes while 0 < x < 1. These confirm strongly a single-phase behavior which is different from the two-phase behavior in the end-members (x = 0 or 1). The electronegativity of M (M = Fe1-xVx) for the redox potential of Fe2+/3+ couple or the M-O4F2 bond length for the V3+/4+ couple plays respectively a dominant role in LiFe1-xVxPO4F solid-solution cathodes.

| S-EPMC6572713 | biostudies-literature

Ionic-Liquid-Assisted Microwave Synthesis of Solid Solutions of Sr1-x Bax SnO3 Perovskite for Photocatalytic Applications.

Project description:Nanocrystalline Sr1-x Bax SnO3 (x=0, 0.2, 0.4, 0.8, 1) perovskite photocatalysts were prepared by microwave synthesis in an ionic liquid (IL) and subsequent heat-treatment. The influence of the Sr/Ba substitution on the structure, crystallization, morphology, and photocatalytic efficiency was investigated and the samples were fully characterized. On the basis of X-ray diffraction results, as the Ba content in the SrSnO3 lattice increases, a symmetry increase was observed from the orthorhombic perovskite structure for SrSnO3 to the cubic BaSnO3 structure. The analysis of the sample morphology by SEM reveals that the Sr1-x Bax SnO3 samples favor the formation of nanorods (500?nm-5??m in diameter and several micrometers long). The photophysical properties were examined by UV/Vis diffuse reflectance spectroscopy. The band gap decreases from 3.85 to 3.19?eV with increasing Ba2+ content. Furthermore, the photocatalytic properties were evaluated for the hydroxylation of terephthalic acid (TA). The order of the activities for TA hydroxylation was Sr0.8 Ba0.2 SnO3 >SrSnO3 >BaSnO3 >Sr0.6 Ba0.4 SnO3 >Sr0.2 Ba0.8 SnO3 . The highest photocatalytic activity was observed for Sr0.8 Ba0.2 SnO3 , and this can be attributed to the synergistic impacts of the modification of the crystal structure and morphology, the relatively large surface area associated with the small crystallite size, and the suitable band gap and band-edge position.

| S-EPMC5601214 | biostudies-literature