Dataset Information

Efficiency of Ipratropium Bromide and Albuterol Deposition in the Lung Delivered via a Soft Mist Inhaler or Chlorofluorocarbon Metered-Dose Inhaler.

ABSTRACT: The propellant-free Combivent Respimat Soft Mist Inhaler (CVT-R) was developed to replace the chlorofluorocarbon-propelled Combivent metered-dose inhaler (CVT-MDI). This steady-state pharmacokinetic (PK) substudy evaluated drug lung-delivery efficiency, using data from two phase III safety and efficacy trials. PK parameters were obtained from well-controlled population PK analyses. Area under the plasma concentration-time curve (AUC), maximum observed plasma concentration (C(max)), and minimum observed plasma concentration (C(min)) showed systemic exposure to ipratropium bromide and albuterol delivered via the CVT-R was proportional to ex-mouthpiece delivered dose. Although the labeled dose of ipratropium bromide in the CVT-R was half that in the CVT-MDI, the systemic exposure was comparable. No PK interaction for the ipratropium bromide and albuterol Respimat drug components was demonstrated. Ipratropium bromide alone resulted in similar exposure to the combination of ipratropium bromide and albuterol. These results show that CVT-R delivers drug more efficiently to the lung than CVT-MDI.

SUBMITTER: MacGregor TR

PROVIDER: S-EPMC5351312 | biostudies-literature | 2016 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Efficiency of Ipratropium Bromide and Albuterol Deposition in the Lung Delivered via a Soft Mist Inhaler or Chlorofluorocarbon Metered-Dose Inhaler.

MacGregor T R TR ZuWallack R R Rubano V V Castles M A MA Dewberry H H Ghafouri M M Wood C C CC

Clinical and translational science 20160306 2

The propellant-free Combivent Respimat Soft Mist Inhaler (CVT-R) was developed to replace the chlorofluorocarbon-propelled Combivent metered-dose inhaler (CVT-MDI). This steady-state pharmacokinetic (PK) substudy evaluated drug lung-delivery efficiency, using data from two phase III safety and efficacy trials. PK parameters were obtained from well-controlled population PK analyses. Area under the plasma concentration-time curve (AUC), maximum observed plasma concentration (C(max)), and minimum o ...[more]

PMID: 26945929

Similar Datasets

Project description:BackgroundThe effectiveness of metered-dose inhalers (MDIs) in delivering medication to the lungs highly depends on its correct usage technique. Current guidelines state optimal technique for high lung deposition should include a slow inhalation (>5 seconds) at an inspiratory flow rate of 30 L/min and inhaler actuation at the start of inhalation. However, these recommendations were based on clinical studies using CFC (chlorofluorocarbon)-MDIs and in vitro studies of HFA (hydrofluoroalkane)-MDIs using idealized MDI techniques of uniform inhalation and actuation, disregarding the nonuniform techniques of actual patients.MethodsTo better understand the effects of time-varying MDI usage parameters on lung deposition of aerosol delivered by an HFA-MDI, we conducted an in vitro study modeled on real-life variable inspiratory flow and actuation techniques recorded from 15 subjects with asthma/chronic obstructive pulmonary disease (COPD). We developed a model representing the time-varying inspiratory flow waveforms and actuation timings based on 43 MDI techniques recorded from patients. Furthermore, we constructed an in vitro experimental setup using a mouth-throat cast, programmable MDI actuator, and breath simulator to evaluate lung deposition for the MDI techniques derived from our model.ResultsHigh inspiratory flow rates, 60-90 L/min, consistently resulted in high in vitro lung deposition (>40%) of aerosol (albuterol delivered from Ventolin HFA-MDI) compared to 30 L/min when MDI actuation occurred in the first half of inhalation. Also, positive coordination resulted in higher in vitro lung deposition compared with negative or zero coordination (actuating before or at the start of inspiration). Furthermore, variation in coordination affected lung deposition more significantly (23%) than flow rate or duration of inspiration (≤5%).ConclusionsIn an in vitro experimental model based on inhalation data from patients with asthma and COPD, we demonstrated that aerosol lung deposition emitted from Ventolin HFA-MDI is most optimal for MDI actuation in the first half of inspiration at high flow rates (60-90 L/min).

Project description:BackgroundIpratropium bromide/albuterol Respimat inhaler (CVT-R) was developed as an environmentally friendly alternative to ipratropium bromide/albuterol metered-dose inhaler (CVT-MDI), which uses a chlorofluorocarbon propellant.ObjectiveThe objective of this study was to evaluate patient satisfaction, device usage, and long-term safety of CVT-R compared to CVT-MDI, and to the simultaneous administration of ipratropium bromide hydrofluoroalkane (HFA; I) and albuterol HFA (A) metered-dose inhalers as dual monotherapies (I + A).DesignThis is a 48-week, open-label, randomized, active-controlled, parallel-group study (n = 470) comparing CVT-R to CVT-MDI and to I + A.ParticipantsPatients were at least 40 years of age, diagnosed with chronic obstructive pulmonary disease (COPD), and current or exsmokers.InterventionsPatients were randomized to receive: (1) CVT-R, one inhalation four times daily (QID); or (2) CVT-MDI, two inhalations QID; or (3) I + A two inhalations of each inhaler QID.Main measuresPatient Satisfaction and Preference Questionnaire (PASAPQ) performance score (primary endpoint) and adverse events.Key resultsPASAPQ performance score was significantly higher (CVT-R versus CVT-MDI, 9.6; and CVT-R versus I + A, 6.2; both P < 0.001) when using CVT-R compared to CVT-MDI or I + A at all visits starting from week 3, while CVT-MDI and I + A treatment groups were similar. Time to first COPD exacerbation was slightly longer in the CVT-R group compared to the other treatment groups, although it did not reach statistical significance (CVT-R versus CVT-MDI, P = 0.57; CVT-R versus I + A, P = 0.22). Rates of withdrawal and patient refusal to continue treatment were lower in CVT-R compared with CVT-MDI and I + A groups (CVT-R versus CVT-MDI, P = 0.09; CVT-R versus I + A, P = 0.005). The percentage of patients reporting adverse events and serious adverse events was similar across all three treatment groups.ConclusionCVT-R is an effective, environmentally friendly inhaler that provides patients with a high level of user satisfaction and may positively impact clinical outcomes while having no adverse impacts on patients using the device.

Project description:BackgroundMany patients with asthma require frequent rescue medication for acute symptoms despite appropriate controller therapies. Thus, determining the most effective relief regimen is important in the management of more severe asthma. This study's objective was to evaluate whether ipratropium bromide/albuterol metered-dose inhaler (CVT-MDI) provides more effective acute relief of bronchospasm in moderate-to-severe asthma than albuterol hydrofluoroalkaline (ALB-HFA) alone after 4 weeks.MethodsIn this double-blind, crossover study, patients who had been diagnosed with asthma for ≥1 year were randomized to two sequences of study medication "as needed" for symptom relief (1-7 day washout before second 4-week treatment period): CVT-MDI/ALB-HFA or ALB-HFA/CVT-MDI. On days 1 and 29 of each sequence, 6-hour serial spirometry was performed after administration of the study drug. Co-primary endpoints were FEV1 area under the curve (AUC0-6) and peak (post-dose) forced expiratory volume in 1 s (FEV1) response (change from test day baseline) after 4 weeks. The effects of "as needed" treatment with ALB-HFA/CVT-MDI were analyzed using mixed effect model repeated measures (MMRM).ResultsA total of 226 patients, ≥18 years old, with inadequately controlled, moderate-to-severe asthma were randomized. The study met both co-primary endpoints demonstrating a statistically significant treatment benefit of CVT-MDI versus ALB-HFA. FEV1 AUC0-6h response was 167 ml for ALB-HFA, 252 ml for CVT-MDI (p <0.0001); peak FEV1 response was 357 ml for ALB-HFA, 434 ml for CVT-MDI (p <0.0001). Adverse events were comparable across groups.ConclusionsCVT-MDI significantly improved acute bronchodilation over ALB-HFA alone after 4 weeks of "as-needed" use for symptom relief, with a similar safety profile. This suggests additive bronchodilator effects of β2-agonist and anticholinergic treatment in moderate-to-severe, symptomatic asthma.Trial registrationClinicalTrials.gov No.: NCT00818454 ; Registered November 16, 2009.

Project description:BACKGROUND:Functional respiratory imaging (FRI) uses three-dimensional models of human lungs and computational fluid dynamics to simulate functional changes within airways and predict the deposition of inhaled drugs. This study used FRI to model the effects of different patient inhalation and drug formulation factors on lung deposition of an inhaled corticosteroid/long-acting ?2-agonist (ICS/LABA) combination, administered by a pressurized metered-dose inhaler. METHODS:Three-dimensional models of the lungs of six patients with asthma (mean forced expiratory volume in 1 s, 83%), treated with an ICS/LABA, were included. FRI modelling was used to simulate (1) the effects on lung deposition of inhalation duration and particle size [fine particle fraction (FPF), proportion of particles <5 µm; and mass median aerodynamic diameter (MMAD), average size of inhalable particles]; (2) deposition of fluticasone propionate/formoterol (FP/FORM) 125/5 µg; and (3) how inhalation profiles and flow rates affected FP/FORM deposition. RESULTS:Total lung depositions (TLDs) following 1-, 3- and 5-s inhalations were 22.8%, 36.1% and 41.6% (metered dose), respectively, and central-to-peripheral deposition (C:P) ratios were 1.81, 0.86 and 0.61, respectively. TLD increased with increasing FPF, from ~8% at 10% FPF to ~36% at 40% FPF (metered dose); by contrast, MMAD had little effect on TLD, which was similar across MMADs (1.5-4.5 µm) at each FPF. FP/FORM deposited throughout central and peripheral airways with gradual (sinusoidal) and sharp (rapid) inhalations. TLD ranged from 35.8 to 44.0% (metered dose) for gradual and sharp inhalations at 30 and 60 L/min mean flow rates. CONCLUSIONS:These data provide important insights into the potential effects of inhalation characteristics (inhalation profile and duration) and aerosol formulation (FPF) on lung deposition of inhaled therapies. FRI thus represents a useful alternative to scintigraphy techniques. Future FRI studies will further our understanding of the deposition of inhaled drugs and help improve the management of asthma.

Dataset Information

Efficiency of Ipratropium Bromide and Albuterol Deposition in the Lung Delivered via a Soft Mist Inhaler or Chlorofluorocarbon Metered-Dose Inhaler.

Publications

Efficiency of Ipratropium Bromide and Albuterol Deposition in the Lung Delivered via a Soft Mist Inhaler or Chlorofluorocarbon Metered-Dose Inhaler.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets