Enhancing Oxygen Evolution Reaction at High Current Densities on Amorphous-Like Ni-Fe-S Ultrathin Nanosheets via Oxygen Incorporation and Electrochemical Tuning.
Ontology highlight
ABSTRACT:
SUBMITTER: Zhang J
PROVIDER: S-EPMC5357987 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The hydrogen evolution reaction (HER) is one of the most significant reactions in the electrolysis water process, and electrocatalysts which possess high mass activity and excellent stability are the most important driving factors to improve the efficiency of HER. As for the efficient commercially electrocatalyst, Pt/C is limited in development because of its high cost. Therefore, the study of non-Pt high-efficiency catalysts is particularly important at this moment. Here, we creatively report for the first time a kind of RuPdM (M= Ni, Co, Fe) ultrathin nanosheets (NSs), which exhibit extraordinary electrochemical properties for HER under alkaline conditions. The overpotential of optimized trimetallic Ru38Pd34Ni28 ultrathin NSs is only 20 mV (10 mA cm-2), and the mass activity reaches 6.15 A mg-1 noble metal at -0.07 V vs RHE. It can be compared to Pt-based electrocatalysts, which have the highest mass activity currently reported. The durability tests also prove that the stability of the electrocatalyst is outstanding. DFT calculations disclose that the flexible modulation of electronic structures of RuPd ultrathin NSs is achieved by utilizing the additional 3d transition metals Fe, Co, and Ni. In particular, the Ni-3d bands act as the continuous electron-supply center for Ru to ensure an efficient electron transfer toward the adsorbates. Meanwhile, the stable Pd sites are critical for coupling the O-2p? orbital in the initial H2O splitting with a facile barrier. This work will open up a new era of non-Pt materials for alkaline hydrogen evolution toward practical application.
| S-EPMC6936089 | biostudies-literature
Project description:Identification of active sites in an electrocatalyst is essential for understanding of the mechanism of electrocatalytic water splitting. To be one of the most active oxygen evolution reaction catalysts in alkaline media, Ni-Fe based compounds have attracted tremendous attention, while the role of Ni and Fe sites played has still come under debate. Herein, by taking the pyrrhotite Fe7S8 nanosheets with mixed-valence states and metallic conductivity for examples, we illustrate that Fe could be a highly active site for electrocatalytic oxygen evolution. It is shown that the delocalized electrons in the ultrathin Fe7S8 nanosheets could facilitate electron transfer processes of the system, where d orbitals of FeII and FeIII would be overlapped with each other during the catalytic reactions, rendering the ultrathin Fe7S8 nanosheets to be the most efficient Fe-based electrocatalyst for water oxidation. As expected, the ultrathin Fe7S8 nanosheets exhibit promising electrocatalytic oxygen evolution activities, with a low overpotential of 0.27 V and a large current density of 300 mA cm-2 at 0.5 V. This work provides solid evidence that Fe could be an efficient active site for electrocatalytic water splitting.
| S-EPMC5704283 | biostudies-literature
Project description:2D layered materials, including metal-di-chalcogenides and transition metal layered double hydroxides, among others, are intensively studied because of new properties that emerge from their 2D confinement, which are attractive for advanced applications. Herein, 2D cobalt ion (Co2+) and benzimidazole (bIm) based zeolite-imidazole framework nanosheets, ZIF-9(III), are reported as exceptionally efficient electrocatalysts for the oxygen evolution reaction (OER). Specifically, liquid-phase ultrasonication is applied to exfoliate a [Co4(bIm)16] zeolite-imidazole framework (ZIF), named as ZIF-9(III) phase, into nanoscale sheets. ZIF-9(III) is selectively prepared through simple mechanical grinding of cobalt nitrate and benzimidazole in the presence of a small amount of ethanol. The resultant exfoliated nanosheets exhibit significantly higher OER activity in alkaline conditions than the corresponding bulk phases ZIF-9 and ZIF-9(III). The electrochemical and physicochemical characterization data support the assignment of the OER activity of the exfoliated nanosheet derived material to nitrogen coordinated cobalt oxyhydroxide N4CoOOH sites, following a mechanism known for Co-porphyrin and related systems. Thus, exfoliated 2D nanosheets hold promise as potential alternatives to commercial noble metal electrocatalysts for the OER.
| S-EPMC6247023 | biostudies-literature
Project description:Hierarchical Ni-Co double transition metal hydroxide nanosheets have been explored as an effective strategy for the design of nonenzymatic glucose sensors. Ni-Co hydroxide nanosheets constructed hollow cubes were successfully synthesized by using Cu2O cubes as templates and subsequently etched by Na2S2O3 to achieve a hollow cubic structure. The molar ratio between Ni and Co was tuned by varying the precursor ratio of NiCl2 and CoCl2. It was observed by transmission electron microscopy (TEM) that the increasing Ni precursor resulted in particle morphology, and the increasing ratio of the Co precursor resulted in more lamellar morphology. The sample with the composition of Ni0.7Co0.3(OH)2 displayed the best performance for glucose sensing with high selectivity (1541 μA mM-1 cm-2), low detection limit (3.42 µM with S/N = 3), and reasonable selectivity. Similar strategies could be applied for the design of other electrode materials with high efficiency for nonenzymatic glucose determination.
| S-EPMC6651393 | biostudies-literature
Project description:The oxygen evolution reaction (OER) is critical to solar production of fuels, but the reaction mechanism underlying the performance for a best OER catalyst, Fe-doped NiOOH [(Ni,Fe)OOH], remains highly controversial. We used grand canonical quantum mechanics to predict the OER mechanisms including kinetics and thus overpotentials as a function of Fe content in (Ni,Fe)OOH catalysts. We find that density functional theory (DFT) without exact exchange predicts that addition of Fe does not reduce the overpotential much. However, DFT with exact exchange predicts dramatic improvement in performance for (Ni,Fe)OOH, leading to an overpotential of 0.42 V and a Tafel slope of 23 mV/decade (dec), in good agreement with experiments, 0.3-0.4 V and 30 mV/dec. We reveal that the high spin [Formula: see text] Fe(IV) leads to efficient formation of an active O radical intermediate, while the closed shell [Formula: see text] Ni(IV) catalyzes the subsequent O-O coupling, and thus it is the synergy between Fe and Ni that delivers the optimal performance for OER.
| S-EPMC6003342 | biostudies-literature
Project description:Developing high-performance Fe-based ammonia catalysts through simple and cost-efficient methods has received an increased level of attention. Herein, we report for the first time, the synthesis of two-dimensional (2D) FeOOH nanoflakes encapsulated by mesoporous SiO2 (mSiO2) via a simple solution-based method for ammonia synthesis. Due to the sticking of the mSiO2 coating layers and the limited spaces in between, the Fe after reduction retains the 2D morphology, showing high resistance against the sintering in the harsh Haber-Bosch process. Compared to supported Fe particles dispersed on mSiO2 spheres, the coated catalyst shows a significantly improved catalytic activity by 50% at 425 °C. Thermal desorption spectroscopy (TDS) reveals the existence of a higher density of reactive sites for N2 activation in the 2D Fe catalyst, which is possibly coupled to a larger density of surface defect sites (kinks, steps, point defects) that are generally considered as active centers in ammonia synthesis. Besides the structural impact of the coating on the 2D Fe, the electronic one is elucidated by partially substituting Si with Al in the coating, confirmed by 29Si and 27Al magic-angle spinning nuclear magnetic resonance (MAS NMR). An increased apparent activation energy (Ea) of the Al-containing catalyst evidences an influence on the nature of the active site. The herein-developed stable 2D Fe nanostructures can serve as an example of a 2D material applied in catalysis, offering the chance of a rational catalyst design based on a stepwise introduction of various promoters, in the coating and on the metal, maintaining the spatial control of the active centers.
| S-EPMC8397249 | biostudies-literature
Project description:A feasible and green sol-gel method is proposed to fabricate well-distributed nano-particulate Fe-Ni2P incorporated in N, P-codoped porous carbon nanosheets (Fe-Ni2P@N,P-CNSs) using biomass agarose as a carbon source, and ethylenediamine tetra (methylenephosphonic acid) (EDTMPA) as both the N and P source. The doped Fe in Ni2P is essential for a substantial increase in intrinsic catalytic activity, while the combined N,P-containing porous carbon matrix with a better degree of graphitization endows the prepared Fe-Ni2P@N,P-CNSs catalyst with a high specific surface area and improved electrical conductivity. Benefiting from the specific chemical composition and designed active site structure, the as-synthesized Fe-Ni2P@N,P-CNSs manifests a satisfying catalytic performance toward both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in an alkaline solution, with low overpotential, small Tafel slope and long-term durability, relative to the counterparts (Fe-free Ni12P5/Ni2P2O7@N,P-CNSs and CNSs) with single components and even comparable to Pt/C and RuO2 catalysts. The present work broadens the exploration of efficient bifunctional oxygen electrocatalysts using earth abundant biomass as carbon sources based on non-noble metals for low cost renewable energy conversion/storage.
| S-EPMC6691339 | biostudies-literature
Project description:Black phosphorus (BP) nanosheet (NS) is an emerging oxygen evolution reaction (OER) electrocatalyst with both high conductivity and abundant active sites. However, its ultrathin structure suffers instability because of the lone pair electrons exposed at the surface, which badly restricts durability for achieving long-term OER catalysis. Herein, a facile solvothermal reduction route is designed to fabricate Co/BP NSs hybrid electrocatalyst by in situ growth of cobalt nanoparticles on BP NSs. Notably, electronic structure engineering of Co/BP NSs catalyst is observed by electron migration from BP to Co due to the higher Fermi level of BP than that of Co. Because of the preferential migration of the active lone pairs from the defect of BP NSs, the stability and high hole mobility can be effectively retained. Consequently, Co/BP NSs electrocatalyst exhibits outstanding OER performance, with an overpotential of 310 mV at 10 mA cm-2, and excellent stability in alkaline media, indicating the potential for the alternatives of commercial IrO2. This study provides insightful understanding into engineering electronic structure of BP NSs by fully utilizing defect and provides a new idea to design hybrid electrocatalysts.
| S-EPMC6096989 | biostudies-literature
Project description:The development of non-precious metal electrocatalysts for renewable energy conversion and storage is compelling but greatly challenging due to low activity of the existing catalysts. Herein, the ultrathin NiAl-layered double hydroxide nanosheets (NiAl-LDH-NSs) are prepared by simple liquid-exfoliation of bulk NiAl-LDHs and first used as ethanol electrooxidation catalysts. The ultrathin two-dimensional (2D) structure ensures that the LDH nanosheets expose a greater number of active sites. More importantly, much Ni(III) active species (NiOOH) in the ultrathin nanosheets are formed by the exfoliation process, which play an authentic catalytic role in the ethanol oxidation reaction (EOR). The presence of NiOOH remarkably improves the reactivity and electrical conductivity of LDH nanosheets. These synergistic effects lead to strikingly more than 30 times enhanced EOR activity of NiAl-LDH-NSs compared to bulk NiAl-LDHs. The obtained electrocatalytic activity is also much better than those of most Ni- and LDH-based EOR catalysts reported to date. In addition, the ultrathin NiAl-LDH-NS electrocatalyst also exhibits good long-term stability (maintain 81.8% of the original value after 10000 s). This study not only provides a highly competitive EOR catalyst, but also opens new avenues toward the design of highly efficient electrode materials that have various potential applications in supercapacitor, Ni-MH battery and other electrocatalytic systems.
| S-EPMC5881604 | biostudies-literature
Project description:TiO2 is well-known nanomaterials and mostly used as solid nanoparticles, and normal hollow spheres for photocatalysts or electrode materials. In this study, a novel self-templated method is presented to successfully fabricate high-surface-area ultrathin nanosheets constructed TiO2 hollow spheres through the solvothermal treatment of the titanate-silicone composite particles combined with calcination. The uniquely structured hollow spheres exhibit excellent rate capability and good cycle stability even at a high current density of ≈10 C for the anode material of Li-ion battery.
| S-EPMC5102664 | biostudies-literature