Dataset Information

Towards better environmental performance of wastewater sludge treatment using endpoint approach in LCA methodology.

ABSTRACT: The aim of this study is to use the life cycle assessment method to measure the environmental performance of the sludge incineration process in a wastewater treatment plant and to propose an alternative that can reduce the environmental impact. To show the damages caused by the treatment processes, the study aimed to use an endpoint approach in evaluating impacts on human health, ecosystem quality, and resources due to the processes. A case study was taken at Bissell Point Wastewater Treatment Plant in Saint Louis, Missouri, U.S. The plant-specific data along with literature data from technical publications were used to build an inventory, and then analyzed the environmental burdens from sludge handling unit in the year 2011. The impact assessment method chosen was ReCipe 2008. The existing scenario (dewatering-multiple hearth incineration-ash to landfill) was evaluated and three alternative scenarios (fluid bed incineration and anaerobic digestion with and without land application) with energy recovery from heat or biogas were proposed and analyzed to find the one with the least environmental impact. The existing scenario shows that the most significant impacts are related to depletion in resources and damage to human health. These impacts mainly came from the operation phase (electricity and fuel consumption and emissions related to combustion). Alternatives showed better performance than the existing scenario. Using ReCipe endpoint methodology, and among the three alternatives tested, the anaerobic digestion had the best overall environmental performance. It is recommended to convert to fluid bed incineration if the concerns were more about human health or to anaerobic digestion if the concerns were more about depletion in resources. The endpoint approach may simplify the outcomes of this study as follows: if the plant is converted to fluid bed incineration, it could prevent an average of 43.2 DALYs in human life, save 0.059 species in the area from extinction, and make a 62% reduction in the plant's current expenses needed by future generations to extract resources per year. At the same time it may prevent 36.1 DALYs in humans, save 0.157 species, and make a 101% reduction in current expenses on resources per year, if converting to anaerobic digestion.

SUBMITTER: Alyaseri I

PROVIDER: S-EPMC5358968 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Conventional wastewater treatment technologies are costly and energy demanding; such issues are especially remarkable when small communities have to clean up their pollutants. In response to these requirements, a new variety of nature-based solution, so-called METland®, has been recently develop by using concepts from Microbial Electrochemical Technologies (MET) to outperform classical constructed wetland regarding wastewater treatment. Thus, the current study evaluates two operation modes (aerobic and aerobic-anoxic) of a full-scale METland®, including a Life Cycle Assessment (LCA) conducted under a Net Environmental Balance perspective. Moreover, a combined technical and environmental analysis using a Net Eutrophication Balance (NEuB) focus concluded that the downflow (aerobic) mode achieved the highest removal rates for both organic pollutant and nitrogen, and it was revealed as the most environmentally friendly design. Actually, aerobic configuration outperformed anaero/aero-mixed mode in a fold-range from 9 to 30%. LCA was indeed recalculated under diverse Functional Units (FU) to determine the influence of each FU in the impacts. Furthermore, in comparison with constructed wetland, METland® showed a remarkable increase in wastewater treatment capacity per surface area (0.6 m2/pe) without using external energy. Specifically, these results suggest that aerobic-anoxic configuration could be more environmentally friendly under specific situations where high N removal is required. The removal rates achieved demonstrated a robust adaptation to influent variations, revealing a removal average of 92% of Biology Oxygen Demand (BOD), 90% of Total Suspended Solids (TSS), 40% of total nitrogen (TN), and 30% of total phosphorus (TP). Moreover, regarding the global warming category, the overall impact was 75% lower compared to other conventional treatments like activated sludge. In conclusion, the LCA revealed that METland® appears as ideal solution for rural areas, considering the low energy requirements and high efficiency to remove organic pollutants, nitrogen, and phosphates from urban wastewater.

Project description:Complex heavy metal (HM)-containing wastewater discharges pose substantial risks to global water ecosystems and human health. Aerobic granular sludge (AGS) has attracted increased attention as an efficient and low-cost adsorbent in HM-containing wastewater treatment. Therefore, this study systematically evaluates the effect of Cu(II), Ni(II), and Cr(III) addition on the characteristics, performance and mechanism of AGS in complex HM-containing wastewater treatment process by means of fourier transform infrared spectroscopy, inductively coupled plasma spectrocopcy, confocal laser scanning microscopy, extracellular polymeric substances (EPS) fractions detection and scanning electron microscope-energy dispersive X-ray. The results showed that AGS efficiently eliminated Cu(II), Ni(II), and Cr(III) by the orchestrated mechanisms of ion exchange, three-layer EPS adsorption [soluble microbial products EPS (SMP-EPS), loosely bound EPS (LB-EPS), tightly bound EPS (TB-EPS)], and inner-sphere adsorption; notably, almost 100% of Ni(II) was removed. Three-layer EPS adsorption was the dominant mechanism through which the HM were removed, followed by ion exchange and inner-sphere adsorption. SMP-EPS and TB-EPS were identified as the key EPS fractions for adsorbing Cr(III) and Cu(II), respectively, while Ni(II) was adsorbed evenly on SMP-EPS, TB-EPS, and LB-EPS. Moreover, the rates at which the complex HM penetrated into the granule interior and their affinity for EPS followed the order Cu(II) > Ni(II) > Cr(III). Ultimately, addition of complex HM stimulated microorganisms to excrete massive phosphodiesterases (PDEs), leading to a pronounced decrease in cyclic diguanylate (c-di-GMP) levels, which subsequently suppressed EPS secretion due to the direct linkage between c-di-GMP and EPS. This study unveils the adaptability and removal mechanism of AGS in the treatment of complex HM-containing wastewater, which is expected to provide novel insights for addressing the challenges posed by intricate real wastewater scenarios.

Project description:Rainfall can affect influent flow rate and compositions of wastewater, and thus further affect wastewater treatment performance and the effluent quality. This study aims to study the influence of rainfall on the environmental impacts of centralized wastewater treatment plants. The correlations between rainfall, and influent flow rate and compositions of wastewater in wet and dry seasons with two sewer systems, i.e. combined and separate sewer systems, were primarily established. Environmental impacts were assessed with life cycle assessment (LCA) to understand the temporal environmental burdens in wet and dry seasons. Functional units as per m3 treated wastewater (FU1) and as per kg PO43-eq. removed (FU2), respectively, were used to evaluate impacts of wastewater treatment to the environment. Strong correlation between rainfall and the influent flow rate was found in the wastewater treatment plants with either a combined sewer system (with Pearson correlation coefficient r at 0.66) or a separate sewer system (with r at 0.84), where r represents the strength of the association between two variables. The rainfall effect is more obvious on the eutrophication potential and global warming potential than on other environmental indicators while sewer system, i.e. combined or separate, seems not important in the two cases studied. Both wastewater treatment plants (WWTPs) show a lower environmental burden in the wet season than in the dry season partially due to the dilution of wastewater by using FU1. The WWTP receiving high strength wastewater, however, demonstrates higher environmental impacts in the wet season by using FU2 than FU1, due to the less efficient treatment caused by heavy rainfall. Meanwhile, it is found that environmental impacts from the WWTP receiving low strength wastewater have no difference when using either FU1 or FU2. The results indicate that the environmental burdens particularly eutrophication and global warming caused by WWTPs are dependent on the correlations of rainfall intensity with wastewater quantity and quality instead of combined or separate sewer system. This could be used to guide a stricter control of eutrophication in a more sensitive season in more vulnerable receiving waters.

Dataset Information

Towards better environmental performance of wastewater sludge treatment using endpoint approach in LCA methodology.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets