Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Prediction of giant thermoelectric power factor in type-VIII clathrate Si46.

ABSTRACT: Clathrate materials have been the subject of intense interest and research for thermoelectric application. Nevertheless, from the very large number of conceivable clathrate structures, only a small fraction of them have been examined. Since the thermal conductivity of clathrates is inherently small due to their large unit cell size and open-framework structure, the current research on clathrates is focused on finding the ones with large thermoelectric power factor. Here we predict an extraordinarily large power factor for type-VIII clathrate Si(46). We show the existence of a large density of closely packed elongated ellipsoidal carrier pockets near the band edges of this so far hypothetical material structure, which is higher than that of the best thermoelectric materials known today. The high crystallographic symmetry near the energy band edges for Si(46)-VIII clathrates is responsible for the formation of such a large number of carrier pockets.

SUBMITTER: Norouzzadeh P

PROVIDER: S-EPMC5382702 | biostudies-literature | 2014 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Prediction of giant thermoelectric power factor in type-VIII clathrate Si46.

Norouzzadeh Payam P Myles Charles W CW Vashaee Daryoosh D

Scientific reports 20141113

Clathrate materials have been the subject of intense interest and research for thermoelectric application. Nevertheless, from the very large number of conceivable clathrate structures, only a small fraction of them have been examined. Since the thermal conductivity of clathrates is inherently small due to their large unit cell size and open-framework structure, the current research on clathrates is focused on finding the ones with large thermoelectric power factor. Here we predict an extraordina ...[more]

PMID: 25391971

Similar Datasets

Giant thermoelectric power factor in ultrathin FeSe superconductor.

Project description:The thermoelectric effect is attracting a renewed interest as a concept for energy harvesting technologies. Nanomaterials have been considered a key to realize efficient thermoelectric conversions owing to the low dimensional charge and phonon transports. In this regard, recently emerging two-dimensional materials could be promising candidates with novel thermoelectric functionalities. Here we report that FeSe ultrathin films, a high-Tc superconductor (Tc; superconducting transition temperature), exhibit superior thermoelectric responses. With decreasing thickness d, the electrical conductivity increases accompanying the emergence of high-Tc superconductivity; unexpectedly, the Seebeck coefficient ? shows a concomitant increase as a result of the appearance of two-dimensional natures. When d is reduced down to ~1?nm, the thermoelectric power factor at 50?K and room temperature reach unprecedented values as high as 13,000 and 260 ?W cm-1 K-2, respectively. The large thermoelectric effect in high Tc superconductors indicates the high potential of two-dimensional layered materials towards multi-functionalization.

| S-EPMC6379375 | biostudies-literature

Giant Room-Temperature Power Factor in p-Type Thermoelectric SnSe under High Pressure.

Project description:Materials that can efficiently convert heat into electricity are widely utilized in energy conversion technologies. The existing thermoelectrics demonstrate rather limited performance characteristics at room temperature, and hence, alternative materials and approaches are very much in demand. Here, it is experimentally shown that manipulating an applied stress can greatly improve a thermoelectric power factor of layered p-type SnSe single crystals up to ≈180 µW K-2 cm-1 at room temperature. This giant enhancement is explained by a synergetic effect of three factors, such as: band-gap narrowing, Lifshitz transition, and strong sample deformation. Under applied pressure above 1 GPa, the SnSe crystals become more ductile, which can be related to changes in the prevailing chemical bonding type inside the layers, from covalent toward metavalent. Thus, the SnSe single crystals transform into a highly unconventional crystalline state in which their layered crystal stacking is largely preserved, while the layers themselves are strongly deformed. This results in a dramatic narrowing in a band gap, from Eg = 0.83 to 0.50 eV (at ambient conditions). Thus, the work demonstrates a novel strategy of improving the performance parameters of chalcogenide thermoelectrics via tuning their chemical bonding type, stimulating a sample deformation and a band-structure reconstruction.

| S-EPMC9284162 | biostudies-literature

Macroscopic weavable fibers of carbon nanotubes with giant thermoelectric power factor.

Project description:Low-dimensional materials have recently attracted much interest as thermoelectric materials because of their charge carrier confinement leading to thermoelectric performance enhancement. Carbon nanotubes are promising candidates because of their one-dimensionality in addition to their unique advantages such as flexibility and light weight. However, preserving the large power factor of individual carbon nanotubes in macroscopic assemblies has been challenging, primarily due to poor sample morphology and a lack of proper Fermi energy tuning. Here, we report an ultrahigh value of power factor (14 ± 5 mW m-1 K-2) for macroscopic weavable fibers of aligned carbon nanotubes with ultrahigh electrical and thermal conductivity. The observed giant power factor originates from the ultrahigh electrical conductivity achieved through excellent sample morphology, combined with an enhanced Seebeck coefficient through Fermi energy tuning. We fabricate a textile thermoelectric generator based on these carbon nanotube fibers, which demonstrates high thermoelectric performance, weavability, and scalability. The giant power factor we observe make these fibers strong candidates for the emerging field of thermoelectric active cooling, which requires a large thermoelectric power factor and a large thermal conductivity at the same time.

| S-EPMC8363648 | biostudies-literature

Quantized thermoelectric Hall effect induces giant power factor in a topological semimetal.

Project description:Thermoelectrics are promising by directly generating electricity from waste heat. However, (sub-)room-temperature thermoelectrics have been a long-standing challenge due to vanishing electronic entropy at low temperatures. Topological materials offer a new avenue for energy harvesting applications. Recent theories predicted that topological semimetals at the quantum limit can lead to a large, non-saturating thermopower and a quantized thermoelectric Hall conductivity approaching a universal value. Here, we experimentally demonstrate the non-saturating thermopower and quantized thermoelectric Hall effect in the topological Weyl semimetal (WSM) tantalum phosphide (TaP). An ultrahigh longitudinal thermopower [Formula: see text] and giant power factor [Formula: see text] are observed at ~40 K, which is largely attributed to the quantized thermoelectric Hall effect. Our work highlights the unique quantized thermoelectric Hall effect realized in a WSM toward low-temperature energy harvesting applications.

| S-EPMC7710760 | biostudies-literature

A Borosilicide with Clathrate VIII Structure.

Project description:The high-pressure phase Na8BxSi46-x (3 < x < 5) is the first representative of a borosilicide crystallizing in the rarely occurring clathrate VIII type structure. Crystals with composition Na8B4Si42 (space group I43̅m; a = 9.7187(2) Å; Pearson symbol cI54) were obtained at 5-8 GPa and 1200 K. The clathrate I modification exists for the same composition at lower pressure with a larger cell volume (Pm3̅n; a = 9. 977(2) Å; cP54). Profound structural adaptions allow for a higher density of the clathrate VIII type than clathrate I, opening up the perspective of obtaining clathrate VIII type compounds as high-pressure forms of clathrate I.

| S-EPMC9377393 | biostudies-literature

Double thermoelectric power factor of a 2D electron system.

Project description:Two-dimensional electron systems have attracted attention as thermoelectric materials, which can directly convert waste heat into electricity. It has been theoretically predicted that thermoelectric power factor can be largely enhanced when the two-dimensional electron layer is far narrower than the de Broglie wavelength. Although many studies have been made, the effectiveness has not been experimentally clarified thus far. Here we experimentally clarify that an enhanced two-dimensionality is efficient to enhance thermoelectric power factor. We fabricated superlattices of [N unit cell SrTi1-xNb x O3|11 unit cell SrTiO3]10-there are two different de Broglie wavelength in the SrTi1-xNb x O3 system. The maximum power factor of the superlattice composed of the longer de Broglie wavelength SrTi1-xNb x O3 exceeded ∼5 mW m-1 K-2, which doubles the value of optimized bulk SrTi1-xNb x O3. The present approach-use of longer de Broglie wavelength-is epoch-making and is fruitful to design good thermoelectric materials showing high power factor.

| S-EPMC6010450 | biostudies-literature

n-type thermoelectric material Mg2Sn0.75Ge0.25 for high power generation.

Project description:Thermoelectric power generation is one of the most promising techniques to use the huge amount of waste heat and solar energy. Traditionally, high thermoelectric figure-of-merit, ZT, has been the only parameter pursued for high conversion efficiency. Here, we emphasize that a high power factor (PF) is equivalently important for high power generation, in addition to high efficiency. A new n-type Mg2Sn-based material, Mg2Sn0.75Ge0.25, is a good example to meet the dual requirements in efficiency and output power. It was found that Mg2Sn0.75Ge0.25 has an average ZT of 0.9 and PF of 52 μW⋅cm(-1)⋅K(-2) over the temperature range of 25-450 °C, a peak ZT of 1.4 at 450 °C, and peak PF of 55 μW⋅cm(-1)⋅K(-2) at 350 °C. By using the energy balance of one-dimensional heat flow equation, leg efficiency and output power were calculated with Th = 400 °C and Tc = 50 °C to be of 10.5% and 6.6 W⋅cm(-2) under a temperature gradient of 150 °C⋅mm(-1), respectively.

| S-EPMC4371904 | biostudies-literature

High Thermoelectric Power Factor of High-Mobility 2D Electron Gas.

Project description:Thermoelectric conversion is an energy harvesting technology that directly converts waste heat from various sources into electricity by the Seebeck effect of thermoelectric materials with a large thermopower (S), high electrical conductivity (?), and low thermal conductivity (?). State-of-the-art nanostructuring techniques that significantly reduce ? have realized high-performance thermoelectric materials with a figure of merit (ZT = S2???T??-1) between 1.5 and 2. Although the power factor (PF = S2??) must also be enhanced to further improve ZT, the maximum PF remains near 1.5-4 mW m-1 K-2 due to the well-known trade-off relationship between S and ?. At a maximized PF, ? is much lower than the ideal value since impurity doping suppresses the carrier mobility. A metal-oxide-semiconductor high electron mobility transistor (MOS-HEMT) structure on an AlGaN/GaN heterostructure is prepared. Applying a gate electric field to the MOS-HEMT simultaneously modulates S and ? of the high-mobility electron gas from -490 µV K-1 and ?10-1 S cm-1 to -90 µV K-1 and ?104 S cm-1, while maintaining a high carrier mobility (?1500 cm2 V-1 s-1). The maximized PF of the high-mobility electron gas is ?9 mW m-1 K-2, which is a two- to sixfold increase compared to state-of-the-art practical thermoelectric materials.

| S-EPMC5770668 | biostudies-literature

Enhanced Thermoelectric Power Factor of Tensile Drawn Poly(3-hexylthiophene).

Project description:The thermoelectric power factor of a broad range of organic semiconductors scales with their electrical conductivity according to a widely obeyed power law, and therefore, strategies that permit this empirical trend to be surpassed are highly sought after. Here, tensile drawing of the conjugated polymer poly(3-hexylthiophene) (P3HT) is employed to create free-standing films with a high degree of uniaxial alignment. Along the direction of orientation, sequential doping with a molybdenum tris(dithiolene) complex leads to a 5-fold enhancement of the power factor beyond the predicted value, reaching up to 16 ?W m-1 K-2 for a conductivity of about 13 S cm-1. Neither stretching nor doping affect the glass transition temperature of P3HT, giving rise to robust free-standing materials that are of interest for the design of flexible thermoelectric devices.

| S-EPMC6344060 | biostudies-literature

Ultrahigh thermoelectric power factor in flexible hybrid inorganic-organic superlattice.

Project description:Hybrid inorganic-organic superlattice with an electron-transmitting but phonon-blocking structure has emerged as a promising flexible thin film thermoelectric material. However, the substantial challenge in optimizing carrier concentration without disrupting the superlattice structure prevents further improvement of the thermoelectric performance. Here we demonstrate a strategy for carrier optimization in a hybrid inorganic-organic superlattice of TiS2[tetrabutylammonium] x [hexylammonium] y , where the organic layers are composed of a random mixture of tetrabutylammonium and hexylammonium molecules. By vacuum heating the hybrid materials at an intermediate temperature, the hexylammonium molecules with a lower boiling point are selectively de-intercalated, which reduces the electron density due to the requirement of electroneutrality. The tetrabutylammonium molecules with a higher boiling point remain to support and stabilize the superlattice structure. The carrier concentration can thus be effectively reduced, resulting in a remarkably high power factor of 904 µW m-1 K-2 at 300 K for flexible thermoelectrics, approaching the values achieved in conventional inorganic semiconductors.

| S-EPMC5647338 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data