Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Picoliter-volume inkjet printing into planar microdevice reservoirs for low-waste, high-capacity drug loading.

ABSTRACT: Oral delivery of therapeutics is the preferred route for systemic drug administration due to ease of access and improved patient compliance. However, many therapeutics suffer from low oral bioavailability due to low pH and enzymatic conditions, poor cellular permeability, and low residence time. Microfabrication techniques have been used to create planar, asymmetric microdevices for oral drug delivery to address these limitations. The geometry of these microdevices facilitates prolonged drug exposure with unidirectional release of drug toward gastrointestinal epithelium. While these devices have significantly enhanced drug permeability in vitro and in vivo, loading drug into the micron-scale reservoirs of the devices in a low-waste, high-capacity manner remains challenging. Here, we use picoliter-volume inkjet printing to load topotecan and insulin into planar microdevices efficiently. Following a simple surface functionalization step, drug solution can be spotted into the microdevice reservoir. We show that relatively high capacities of both topotecan and insulin can be loaded into microdevices in a rapid, automated process with little to no drug waste.

SUBMITTER: Fox CB

PROVIDER: S-EPMC5426811 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Acute volume loading and exercise capacity in postural tachycardia syndrome.

Project description:Postural tachycardia syndrome (POTS) is associated with exercise intolerance, hypovolemia, and cardiac atrophy, which may contribute to reduced stroke volume and compensatory exaggerated heart rate (HR) increases. Acute volume loading with intravenous (iv) saline reduces HR and improves orthostatic tolerance and symptoms in POTS, but its effect on exercise capacity is unknown. In this study, we determined the effect of iv saline infusion on peak exercise capacity (VO2peak) in POTS. Nineteen patients with POTS participated in a sequential study. VO2peak was measured on two separate study days, following administration of placebo or 1 liter of i.v. saline (NaCl 0.9%). Patients exercised on a semirecumbent bicycle with resistance increased by 25 W every 2 min until maximal effort was achieved. Patients exhibited blood volume deficits (-13.4 ± 1.4% ideal volume), consistent with mild to moderate hypovolemia. At baseline, saline significantly increased stroke volume (saline 80 ± 8 ml vs. placebo 64 ± 4 ml; P = 0.010), increased cardiac output (saline 6.9 ± 0.5 liter/min vs. placebo 5.7 ± 0.2 liter/min; P = 0.021), and reduced systemic vascular resistance (saline 992.6 ± 70.0 dyn-s/cm(5) vs. placebo 1,184.0 ± 50.8 dyn-s/cm(5); P = 0.011), with no effect on HR or blood pressure. During exercise, saline did not produce differences in VO2peak (saline 26.3 ± 1.2 mg·kg(-1)·min(-1) vs. placebo 27.7 ± 1.8 mg·kg(-1)·min(-1); P = 0.615), peak HR [saline 174 ± 4 beats per minute (bpm) vs. placebo 175 ± 3 bpm; P = 0.672] or other cardiovascular parameters. These findings suggest that acute volume loading with saline does not improve VO2peak or cardiovascular responses to exercise in POTS, despite improvements in resting hemodynamic function.

| S-EPMC4157162 | biostudies-literature

Noniridescent Biomimetic Photonic Microdomes by Inkjet Printing.

Project description:Certain bird species have evolved spectacular colors that arise from organized nanostructures of melanin. Its high refractive index (∼1.8) and broadband absorptive properties enable vivid structural colors that are nonsusceptible to photobleaching. Mimicking natural melanin structural coloration could enable several important applications, in particular, for noniridescent systems with colors that are independent of incidence angle. Here, we address this by forming melanin photonic crystal microdomes by inkjet printing. Owing to their curved nature, the microdomes exhibit noniridescent vivid structural coloration, tunable throughout the visible range via the size of the nanoparticles. Large-area arrays (>1 cm2) of high-quality photonic microdomes could be printed on both rigid and flexible substrates. Combined with scalable fabrication and the nontoxicity of melanin, the presented photonic microdomes with noniridescent structural coloration may find use in a variety of applications, including sensing, displays, and anticounterfeit holograms.

| S-EPMC7872416 | biostudies-literature

Immobilization of planktonic algal spores by inkjet printing.

Project description:The algal cell immobilization is a commonly used technique for treatment of waste water, production of useful metabolites and management of stock culture. However, control over the size of immobilized droplets, the population of microbes, and production rate in current techniques need to be improved. Here, we use drop-on-demand inkjet printing to immobilize spores of the alga Ecklonia cava within alginate microparticles for the first time. Microparticles with immobilized spores were generated by printing alginate-spore suspensions into a calcium chloride solution. We demonstrate that the inkjet technique can control the number of spores in an ejected droplet in the range of 0.23 to 1.87 by varying spore densities in bioink. After the printing-based spore encapsulation, we observe initial sprouting and continuous growth of thallus until 45 days of culture. Our study suggest that inkjet printing has a great potential to immobilize algae, and that the ability to control the number of encapsulated spores and their microenvironments can facilitate research into microscopic interactions of encapsulated spores.

| S-EPMC6710280 | biostudies-literature

Fabrication of capacitive acoustic resonators combining 3D printing and 2D inkjet printing techniques.

Project description:A capacitive acoustic resonator developed by combining three-dimensional (3D) printing and two-dimensional (2D) printed electronics technique is described. During this work, a patterned bottom structure with rigid backplate and cavity is fabricated directly by a 3D printing method, and then a direct write inkjet printing technique has been employed to print a silver conductive layer. A novel approach has been used to fabricate a diaphragm for the acoustic sensor as well, where the conductive layer is inkjet-printed on a pre-stressed thin organic film. After assembly, the resulting structure contains an electrically conductive diaphragm positioned at a distance from a fixed bottom electrode separated by a spacer. Measurements confirm that the transducer acts as capacitor. The deflection of the diaphragm in response to the incident acoustic single was observed by a laser Doppler vibrometer and the corresponding change of capacitance has been calculated, which is then compared with the numerical result. Observation confirms that the device performs as a resonator and provides adequate sensitivity and selectivity at its resonance frequency.

| S-EPMC4634497 | biostudies-literature

Inkjet Printing of Magnetic Particles Toward Anisotropic Magnetic Properties.

Project description:Unique properties of one-dimensional assemblies of particles have attracted great attention during the past decades, particularly with respect to the potential for anisotropic magnetism. Patterned films can be created using inkjet printing; however, drying of particle-laden colloidal droplets on solid surfaces is usually accompanied by the well-known coffee-ring effect, deteriorating both the uniformity and resolution of the printed configurations. This study examines the effect of externally applied magnetic field on particle deposition patterns. Ferromagnetic Gd5Si4 particles were formulated in terpineol oil and directly deposited via magnetic field-assisted inkjet printing on a photopaper to generate patterned films with suppressed coffee-ring effect. The particle deposition morphology is determined by both solvent imbibition and particle-magnetic field interactions. Three characteristic times are considered, namely, the critical time for solvent imbibition into the substrate (tim), the time it takes for particles to form chains in the presence of the magnetic field (tch), and the time in which the particles reach the substrate in the direction normal to the substrate (tpz). The characteristic time ratios (tpz/tim) and (tpz/tch) determine the final deposition morphology in the presence of magnetic field. The ability to control particle deposition and assembly, thus tuning the magnetic anisotropic properties of nanostructured materials is a promising approach for many engineering applications.

| S-EPMC6838153 | biostudies-literature

Inkjet printing-based fabrication of microscale 3D ice structures.

Project description:This study proposed a method for fabricating 3D microstructures of ice without a supporting material. The inkjet printing process was performed in a low humidity environment to precisely control the growth direction of the ice crystals. In the printing process, water droplets (volume = hundreds of picoliters) were deposited onto the previously formed ice structure, after which they immediately froze. Different 3D structures (maximum height = 2000 µm) could be formed by controlling the substrate temperature, ejection frequency and droplet size. The growth direction was dependent on the landing point of the droplet on the previously formed ice structure; thus, 3D structures could be created with high degrees of freedom.

| S-EPMC8433306 | biostudies-literature

3D Inkjet Printing of Complex, Cell-Laden Hydrogel Structures.

Project description:Inkjet printing is widely considered a promising strategy to pattern hydrogels and living cells into three-dimensional (3D) constructs that structurally resemble tissues in our body. However, this approach is currently constrained by the limited control over multi-component deposition: the variable droplet ejection characteristics of different bioinks and dispensing units make synchronized printing very challenging. This invariably results in artificial tissues that lack the complexity and function of their native counterparts. By careful optimization of the printing parameters for two different bioink formulations, here we report the inkjet-based 3D-patterning of hydrogels according to relatively complex blueprints. 3D printing of bioinks containing living cells resulted in high-resolution, multi-component living constructs. Finally, we describe a sacrificial material approach to inkjet print perfuseable channels for improved long-term cultures of larger samples. We believe that this work provides a foundation for the generation of more complex 3D tissue models by inkjet printing.

| S-EPMC6244156 | biostudies-literature

Inkjet Printing of Functional Materials for Optical and Photonic Applications.

Project description:Inkjet printing, traditionally used in graphics, has been widely investigated as a valuable tool in the preparation of functional surfaces and devices. This review focuses on the use of inkjet printing technology for the manufacturing of different optical elements and photonic devices. The presented overview mainly surveys work done in the fabrication of micro-optical components such as microlenses, waveguides and integrated lasers; the manufacturing of large area light emitting diodes displays, liquid crystal displays and solar cells; as well as the preparation of liquid crystal and colloidal crystal based photonic devices working as lasers or optical sensors. Special emphasis is placed on reviewing the materials employed as well as in the relevance of inkjet in the manufacturing of the different devices showing in each of the revised technologies, main achievements, applications and challenges.

| S-EPMC5457235 | biostudies-other

Black phosphorus ink formulation for inkjet printing of optoelectronics and photonics.

Project description:Black phosphorus is a two-dimensional material of great interest, in part because of its high carrier mobility and thickness dependent direct bandgap. However, its instability under ambient conditions limits material deposition options for device fabrication. Here we show a black phosphorus ink that can be reliably inkjet printed, enabling scalable development of optoelectronic and photonic devices. Our binder-free ink suppresses coffee ring formation through induced recirculating Marangoni flow, and supports excellent consistency (<?2% variation) and spatial uniformity (<?3.4% variation), without substrate pre-treatment. Due to rapid ink drying (<?10?s at <?60?°C), printing causes minimal oxidation. Following encapsulation, the printed black phosphorus is stable against long-term (>?30 days) oxidation. We demonstrate printed black phosphorus as a passive switch for ultrafast lasers, stable against intense irradiation, and as a visible to near-infrared photodetector with high responsivities. Our work highlights the promise of this material as a functional ink platform for printed devices.Atomically thin black phosphorus shows promise for optoelectronics and photonics, yet its instability under environmental conditions and the lack of well-established large-area synthesis protocols hinder its applications. Here, the authors demonstrate a stable black phosphorus ink suitable for printed ultrafast lasers and photodetectors.

| S-EPMC5561124 | biostudies-literature

Coding cell micropatterns through peptide inkjet printing for arbitrary biomineralized architectures.

Project description:Well-designed micropatterns present in native tissues and organs involve changes in extracellular matrix compositions, cell types and mechanical properties to reflect complex biological functions. However, the design and fabrication of these micropatterns in vitro to meet task-specific biomedical applications remains a challenge. A de novo design strategy to code and synthesize functional micropatterns is presented to engineer cell alignment through the integration of aqueous-peptide inkjet printing and site-specific biomineralization. The inkjet printing provides direct writing of macroscopic biosilica selective peptide-R5 patterns with micrometer-scale resolution on the surface of a biopolymer (silk) hydrogel. This is combined with in situ biomineralization of the R5 peptide for site-specific growth of silica nanoparticles on the micropatterns, avoiding the use of harsh chemicals or complex processing. The functional micropatterned systems are used to align human mesenchymal stem cells and bovine serum albumin. This combination of peptide printing and site-specific biomineralization provides a new route for developing cost-effective micropatterns, with implications for broader materials designs. Coding cell micropatterns through peptide inkjet printing for arbitrary biomineralized architectures is demonstrated here. The functional micropatterned systems are used to align human mesenchymal stem cells and bovine serum albumin in vitro, avoiding the use of harsh chemicals or complex processing, while providing potential applications in developing cost-effective micropatterns to meet task-specific biomedical applications.

| S-EPMC7241601 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data