Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

An Angstrom-sensitive, differential MEMS capacitor for monitoring the milliliter dynamics of fluids.

ABSTRACT: A device, with MEMS sensors at its core, has been fabricated and tested for measuring low fluid pressure and slow flow rates. The motivation was to measure clinically relevant ranges of slow-moving fluids in living systems, such as the cerebrospinal fluid in the brain. For potential clinical utility, the device can be read transcutaneously by inductive coupling to MEMS capacitive sensors in circuits with resonance frequencies in the MHz range. Signal shifts for flow rates in the range of 0-42 mL/h and differential pressure levels between 0.1 and 2 kPa have been measured, because the sensitivity in the capacitance gap measurement is about 1 Å. The sensors have been used successfully to monitor simulated cerebrospinal fluid dynamics. The device does not utilize any internal power, since it is powered externally via the inductive coupling.

SUBMITTER: Apigo DJ

PROVIDER: S-EPMC5438090 | biostudies-literature | 2016 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

An Angstrom-sensitive, differential MEMS capacitor for monitoring the milliliter dynamics of fluids.

Apigo David J DJ Bartholomew Philip L PL Russell Thomas T Kanwal Alokik A Farrow Reginald C RC Thomas Gordon A GA

Sensors and actuators. A, Physical 20161020

A device, with MEMS sensors at its core, has been fabricated and tested for measuring low fluid pressure and slow flow rates. The motivation was to measure clinically relevant ranges of slow-moving fluids in living systems, such as the cerebrospinal fluid in the brain. For potential clinical utility, the device can be read transcutaneously by inductive coupling to MEMS capacitive sensors in circuits with resonance frequencies in the MHz range. Signal shifts for flow rates in the range of 0-42 mL ...[more]

PMID: 28533631

Similar Datasets

Characterising shear-induced dynamics in flowing complex fluids using differential dynamic microscopy.

Project description:Microscopic dynamics reveal the origin of the bulk rheological response in complex fluids. In model systems particle motion can be tracked, but for industrially relevant samples this is often impossible. Here we adapt differential dynamic microscopy (DDM) to study flowing highly-concentrated samples without particle resolution. By combining an investigation of oscillatory flow, using a novel "echo-DDM" analysis, and steady shear, through flow-DDM, we characterise the yielding of a silicone oil emulsion on both the microscopic and bulk level. Through measuring the rate of shear-induced droplet rearrangements and the flow velocity, the transition from a solid-like to liquid-like state is shown to occur in two steps: with droplet mobilisation marking the limit of linear visco-elasticity, followed by the development of shear localisation and macroscopic yielding. Using this suite of techniques, such insight could be developed for a wide variety of challenging complex fluids.

| S-EPMC8513683 | biostudies-literature

Shape-sensitive crystallization in colloidal superball fluids.

Project description:Guiding the self-assembly of materials by controlling the shape of the individual particle constituents is a powerful approach to material design. We show that colloidal silica superballs crystallize into canted phases in the presence of depletants. Some of these phases are consistent with the so-called "Λ1" lattice that was recently predicted as the densest packing of superdisks. As the size of the depletant is reduced, however, we observe a transition to a square phase. The differences in these entropically stabilized phases result from an interplay between the size of the depletants and the fine structure of the superball shape. We find qualitative agreement of our experimental results both with a phase diagram computed on the basis of the volume accessible to the depletants and with simulations. By using a mixture of depletants, one of which is thermosensitive, we induce solid-to-solid phase transitions between square and canted structures. The use of depletant size to leverage fine features of the shape of particles in driving their self-assembly demonstrates a general and powerful mechanism for engineering novel materials.

| S-EPMC4418869 | biostudies-literature

Transport dynamics of complex fluids.

Project description:Thermal motion in complex fluids is a complicated stochastic process but ubiquitously exhibits initial ballistic, intermediate subdiffusive, and long-time diffusive motion, unless interrupted. Despite its relevance to numerous dynamical processes of interest in modern science, a unified, quantitative understanding of thermal motion in complex fluids remains a challenging problem. Here, we present a transport equation and its solutions, which yield a unified quantitative explanation of the mean-square displacement (MSD), the non-Gaussian parameter (NGP), and the displacement distribution of complex fluids. In our approach, the environment-coupled diffusion kernel and its time correlation function (TCF) are the essential quantities that determine transport dynamics and characterize mobility fluctuation of complex fluids; their time profiles are directly extractable from a model-free analysis of the MSD and NGP or, with greater computational expense, from the two-point and four-point velocity autocorrelation functions. We construct a general, explicit model of the diffusion kernel, comprising one unbound-mode and multiple bound-mode components, which provides an excellent approximate description of transport dynamics of various complex fluidic systems such as supercooled water, colloidal beads diffusing on lipid tubes, and dense hard disk fluid. We also introduce the concepts of intrinsic disorder and extrinsic disorder that have distinct effects on transport dynamics and different dependencies on temperature and density. This work presents an unexplored direction for quantitative understanding of transport and transport-coupled processes in complex disordered media.

| S-EPMC6600932 | biostudies-literature

A Low-Power MEMS IDE Capacitor with Integrated Microhotplate: Application as Methanol Sensor using a Metal-Organic Framework Coating as Affinity Layer.

Project description:Capacitors made of interdigitated electrodes (IDEs) as a transducer platform for the sensing of volatile organic compounds (VOCs) have advantages due to their lower power operation and fabrication using standard micro-fabrication techniques. Integrating a micro-electromechanical system (MEMS), such as a microhotplate with IDE capacitor, further allows study of the temperature- dependent sensing response of VOCs. In this paper, the design, fabrication, and characterization of a low-power MEMS microhotplate with IDE capacitor to study the temperature-dependent sensing response to methanol using Zeolitic imidazolate framework (ZIF-8), a class of metal-organic framework (MOF), is presented. A Titanium nitride (TiN) microhotplate with aluminum IDEs suspended on a silicon nitride membrane is fabricated and characterized. The power consumption of the ZIF-8 MOF-coated device at an operating temperature of 50 ∘ C is 4.5 mW and at 200 ∘ C it is 26 mW. A calibration methodology for the effects of temperature of the isolation layer between the microhotplate electrodes and the capacitor IDEs is developed. The device coated with ZIF-8 MOF shows a response to methanol in the concentration range of 500 ppm to 7000 ppm. The detection limit of the sensor for methanol vapor at 20 ∘ C is 100 ppm. In situ study of sensing properties of ZIF-8 MOF to methanol in the temperature range from 20 ∘ C to 50 ∘ C using the integrated microhotplate and IDE capacitor is presented. The kinetics of temperature-dependent adsorption and desorption of methanol by ZIF-8 MOF are fitted with double-exponential models. With the increase in temperature from 20 ∘ C to 50 ∘ C, the response time for sensing of methanol vapor concentration of 5000 ppm decreases by 28%, whereas the recovery time decreases by 70%.

| S-EPMC6412504 | biostudies-literature

Compact Sphere-Shaped Airflow Vector Sensor Based on MEMS Differential Pressure Sensors.

Project description:This paper presents an airflow vector sensor for drones. Drones are expected to play a role in various industrial fields. However, the further improvement of flight stability is a significant issue. In particular, compact drones are more affected by wind during flight. Thus, it is desirable to detect air current directly by an airflow sensor and feedback to the control. In the case of a drone in flight, the sensor should detect wind velocity and direction, particularly in the horizontal direction, for a sudden crosswind. In addition, the sensor must also be small, light, and highly sensitive. Here, we propose a compact spherical airflow sensor for drones. Three highly sensitive microelectromechanical system (MEMS) differential pressure (DP) sensor chips were built in the spherical housing as the sensor elements. The 2D wind direction and velocity can be measured from these sensor elements. The fabricated airflow sensor was attached to a small toy drone. It was demonstrated that the sensor provided an output corresponding to the wind velocity and direction when horizontal wind was applied via a fan while the drone was flying. The experimental results demonstrate that the proposed sensor will be helpful for directly measuring the air current for a drone in flight.

| S-EPMC8838244 | biostudies-literature

Universal Two-Component Dynamics in Supercritical Fluids.

Project description:Despite the technological importance of supercritical fluids, controversy remains about the details of their microscopic dynamics. In this work, we study four supercritical fluid systems─water, Si, Te, and Lennard-Jones fluid─via classical molecular dynamics simulations. A universal two-component behavior is observed in the intermolecular dynamics of these systems, and the changing ratio between the two components leads to a crossover from liquidlike to gaslike dynamics, most rapidly around the Widom line. We find evidence to connect the liquidlike component dominating at lower temperatures with intermolecular bonding and the component prominent at higher temperatures with free-particle, gaslike dynamics. The ratio between the components can be used to describe important properties of the fluid, such as its self-diffusion coefficient, in the transition region. Our results provide an insight into the fundamental mechanism controlling the dynamics of supercritical fluids and highlight the role of spatiotemporally inhomogeneous dynamics even in thermodynamic states where no large-scale fluctuations exist in the fluid.

| S-EPMC8686117 | biostudies-literature

Colloidal aggregation and dynamics in anisotropic fluids.

Project description:We present experiments and numerical simulations to investigate the collective behavior of submicrometer-sized particles immersed in a nematic micellar solution. We use latex spheres with diameters ranging from 190 to 780 nm and study their aggregation properties due to the interplay of the various colloidal forces at work in the system. We found that the morphology of aggregates strongly depends on the particle size, with evidence for two distinct regimes: the biggest inclusions clump together within minutes into either compact clusters or V-like structures that are completely consistent with attractive elastic interactions. On the contrary, the smallest particles form chains elongated along the nematic axis, within comparable timescales. In this regime, Monte Carlo simulations, based on a modified diffusion-limited cluster aggregation model, strongly suggest that the anisotropic rotational Brownian motion of the clusters combined with short-range depletion interactions dominate the system coarsening; elastic interactions no longer prevail. The simulations reproduce the sharp transition between the two regimes on increasing the particle size. We provide reasonable estimates to interpret our data and propose a likely scenario for colloidal aggregation. These results emphasize the growing importance of the diffusion of species at suboptical-wavelength scales and raise a number of fundamental issues.

| S-EPMC4000788 | biostudies-literature

Pentapartite fractionation of particles in oral fluids by differential centrifugation.

Project description:Oral fluids (OFs) contain small extracellular vesicles (sEVs or exosomes) that carry disease-associated diagnostic molecules. However, cells generate extracellular vesicles (EVs) other than sEVs, so the EV population is quite heterogeneous. Furthermore, molecules not packaged in EVs can also serve as diagnostic markers. For these reasons, developing a complete picture of particulate matter in the oral cavity is important before focusing on specific subtypes of EVs. Here, we used differential centrifugation to fractionate human OFs from healthy volunteers and patients with oral squamous cell carcinoma into 5 fractions, and we characterized the particles, nucleic acids, and proteins in each fraction. Canonical exosome markers, including CD63, CD9, CD133, and HSP70, were found in all fractions, whereas CD81 and AQP5 were enriched in the 160K fraction, with non-negligible amounts in the 2K fraction. The 2K fraction also contained its characteristic markers that included short derivatives of EGFR and E-cadherin, as well as an autophagosome marker, LC3, and large multi-layered vesicles were observed by electronic microscopy. Most of the DNA and RNA was recovered from the 0.3K and 2K fractions, with some in the 160K fraction. These results can provide guideline information for development of purpose-designed OF-based diagnostic systems.

| S-EPMC7870959 | biostudies-literature

A High-Throughput MEMS-Based Differential Scanning Calorimeter for Direct Thermal Characterization of Antibodies

Project description:Calorimeters, which can be used for rapid thermal characterization of biomolecules, are getting intense attention in drug development. This paper presents a novel MEMS-based differential scanning calorimeter (DSC) for direct thermal characterization of protein samples. The DSC consisted of a pair of temperature sensors made by vanadium oxide (VOx) film with a temperature coefficient of resistivity of −0.025/K at 300 K, a microfluidic device with high thermal insulation (2.8 K/mW), and a Peltier heater for linear temperature scanning. The DSC exhibited high sensitivity (6.1 µV/µW), low noise (0.4 µW), high scanning rate (45 K/min), and low sample consumption volume (0.63 µL). The MEMS DSC was verified by measuring the temperature-induced denaturation of lysozyme at different pH, and then used to study the thermal stability of a monoclonal antibody (mAb), an antigen-binding fragment (Fab), and a dual variable domain immunoglobulin (DVD-Ig) at pH = 6. The results showed that lysozyme is a stable protein in the pH range of 4.0–8.0. The protein stability study revealed that the transition temperatures of the intact Fab fragment, mAb, and DVD proteins were comparable with conformational stability results obtained using conventional commercial DSC. These studies demonstrated that the MEMS DSC is an effective tool for directly understanding the thermal stability of antibodies in a high-throughput and low-cost manner compared to conventional calorimeters.

| S-EPMC9221040 | biostudies-literature

Light-switching excimer probes for rapid protein monitoring in complex biological fluids.

Project description:Quantitative protein bioanalysis in complex biological fluids presents considerable challenges in biological studies and disease diagnosis. The major obstacles are the background signals from both the probe and the biological fluids where the proteins reside. We have molecularly engineered light-switching excimer aptamer probes for rapid and sensitive detection of a biomarker protein, platelet-derived growth factor (PDGF). Labeled with one pyrene at each end, the aptamer switches its fluorescence emission from approximately 400 nm (pyrene monomer) to 485 nm (pyrene excimer) upon PDGF binding. This fluorescence wavelength change from monomer to excimer emission is a result of aptamer conformation rearrangement induced by target binding. The excimer probe is able to effectively detect picomolar PDGF in homogeneous solutions. Because the excimer has a much longer fluorescence lifetime (approximately 40 ns) than that of the background (approximately 5 ns), time-resolved measurements were used to eliminate the biological background. We thus were able to detect PDGF in a cell sample quantitatively without any sample pretreatment. This molecular engineering strategy can be used to develop other aptamer probes for protein monitoring. Combined with lifetime-based measurements and molecular engineering, light-switching excimer aptamer probes hold great potential in protein analysis for biomedical studies.

| S-EPMC1297691 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data