Characterization by SEM, TEM and Quantum-Chemical Simulations of the Spherical Carbon with Nitrogen (SCN) Active Carbon Produced by Thermal Decomposition of Poly(vinylpyridine-divinylbenzene) Copolymer
Ontology highlight
ABSTRACT:
SUBMITTER: Khavryuchenko V
PROVIDER: S-EPMC5445732 | biostudies-literature | 2009 Sep
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Micrographs of multiple nuclear graphite grades were captured using scanning electron microscopy (SEM) and transmission electron microscopy (TEM), complementing the data contained in the related manuscript, "A multi-technique image library of nuclear graphite microstructures of historical and modern grades." The SEM micrographs show the differences among filler particles, binder, and thermal cracks contained in nuclear graphite. This library of microstructures serves as a baseline of as-received material and enables understanding the phases and differences between nuclear grades. TEM micrographs included in this manuscript elucidate the content of a common material contained in the binder phase known as quinoline insoluble (QI) particles. These particles are a phase of graphite that can be used as a forensic fingerprint of the neutron irradiation effects in graphite. The manuscript also contains some data of glassy carbon, an allotrope of carbon that shares similarities with some of the chaotic structures in nuclear graphite. Combined, these micrographs provide a detailed overview of the microstructures of various graphite grades prior to neutron irradiation.
| S-EPMC9772810 | biostudies-literature
Project description:Identifying endogenous tissue stem cells remains a key challenge in developmental and regenerative biology. To distinguish and molecularly characterise stem cell populations in large heterogeneous tissues, the combination of cytochemical cell markers with ultrastructural morphology is highly beneficial. Here, we realise this through workflows of multi-resolution immuno-correlative light and electron microscopy (iCLEM) methodologies. Taking advantage of the antigenicity preservation of the Tokuyasu technique, we have established robust protocols and workflows and provide a side-by-side comparison of iCLEM used in combination with scanning EM (SEM), scanning TEM (STEM), or transmission EM (TEM). Evaluation of the applications and advantages of each method highlights their practicality for the identification, quantification, and characterization of heterogeneous cell populations in small organisms, organs, or tissues in healthy and diseased states. The iCLEM techniques are broadly applicable and can use either genetically encoded or cytochemical markers on plant, animal and human tissues. We demonstrate how these protocols are particularly suited for investigating neural stem and progenitor cell populations of the vertebrate nervous system.
| S-EPMC7806999 | biostudies-literature
Project description:BackgroundAlopecia areata (AA) is a T-cell-mediated autoimmune disease and affects up to 2% of the population. There is a need for a more profound and rigorous understanding of the structure and composition of human hair affected by AA in order to manage this disease. The aim of this article is to understand the effects of AA on the structure and composition of human hair.MethodsSeveral physico-chemical investigation methods, such as Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Energy-Dispersive X-ray Spectroscopy (EDX), and microbeam Small Angle X-ray Scattering (SAXS), were used to analyze human hair samples obtained from healthy donors and patients with AA.ResultsSEM revealed more severe hair surface defects for the white regrown hair (W-AA) samples. TEM showed the presence of air-like vesicles located in the endocuticle of regrown hair. Analysis of ultrathin sections of W-AA showed the existence of empty vesicles and smaller melanin granules compared to control samples. SAXS demonstrated that unaffected hair of patients with AA (B-AA) and W-AA melanin aggregates are different in their sizes and shapes compared to the control samples. EDX data showed that W-AA elemental composition was significantly different from the other sample groups. Our study showcases promising non-invasive techniques for a better and more accurate understanding of changes in the internal structure and composition of hair affected by AA.
| S-EPMC6968496 | biostudies-literature
Project description:This manuscript provides raw nitrogen gas adsorption data, images and videos obtained from a technique that combines Focused Ion Beam (FIB) and Scanning Electron Microscopy (SEM) known as FIB-SEM tomography and Transmission Electron Microscopy (TEM) micrographs. This collection of data is useful for characterization of the effects of high fluence neutron irradiation in nuclear graphite as described in the associated manuscript, "Mesopores development in superfine grain graphite neutron-irradiated at high fluence" (Contescu et al., 2019). Nitrogen adsorption isotherms at 77?K are provided for graphite samples before and after neutron irradiation at 300, 450, and 750?°C at fluences before and after turnaround. FIB-SEM tomography reveals porosity of unirradiated and irradiated samples. Using this technique, four data sets were obtained, of which the first three are presented in video format, whereas the fourth one is a series of images provided in raw format unique to this manuscript. All microscopy data document the microstructure, surface area and porosity of superfine grain graphite G347A (Tokai Carbon, Japan) before irradiation and irradiated after turnaround at 400?°C. TEM micrographs provide unique information on irradiation damage at high neutron fluence (>27. 8 displacements per atom, dpa) in the microstructure and crystal lattice of graphite. Additional TEM micrographs are provided here, which do not duplicate the research paper published elsewhere (Contescu et al., 2019). These data sets are unique, as samples at high irradiation doses have never been measured or imaged before with the aforementioned techniques.
| S-EPMC6290249 | biostudies-literature
Project description:This SEM, TEM and Raman Spectra and economic calculations data provides a benchmark for carbon nanotubes synthesized via molten electrolyte via the carbon dioxide to carbon nanotube (C2CNT) process useful for comparison to other data on longer length C2CNT wools; specifically: (I) C2CNT electrosynthesis with bare (uncoated) cathodes and without pre-electrolysis low current activation. (II) C2CNT Intermediate length CNTs with intermediate integrated electrolysis charge transfer. (III) C2CNT Admixing of sulfur, nitrogen and phosphorous (in addition to boron) to carbon nanotubes, and (IV) Scalability of the C2CNT process. This data presented in this article are related to the research article entitled "Carbon Nanotube Wools Made Directly from CO2 by Molten Electrolysis: Value Driven Pathways to Carbon Dioxide Greenhouse Gas Mitigation" (Johnson et al., 2017) [1].
| S-EPMC5573802 | biostudies-other
Project description:A poly(2-(dimethylamino)ethyl methacrylate) (PDMA) chain transfer agent (CTA) is used for the reversible addition-fragmentation chain transfer (RAFT) alcoholic dispersion polymerization of benzyl methacrylate (BzMA) in ethanol at 70 °C. THF GPC analysis indicated a well-controlled polymerization with molecular weight increasing linearly with conversion. GPC traces also showed high blocking efficiency with no homopolymer contamination apparent and Mw/Mn values below 1.35 in all cases. 1H NMR studies confirmed greater than 98% BzMA conversion for a target PBzMA degree of polymerization (DP) of up to 600. The PBzMA block becomes insoluble as it grows, leading to the in situ formation of sterically stabilized diblock copolymer nanoparticles via polymerization-induced self-assembly (PISA). Fixing the mean DP of the PDMA stabilizer block at 94 units and systematically varying the DP of the PBzMA block enabled a series of spherical nanoparticles of tunable diameter to be obtained. These nanoparticles were characterized by TEM, DLS, MALLS, and SAXS, with mean diameters ranging from 35 to 100 nm. The latter technique was particularly informative: data fits to a spherical micelle model enabled calculation of the core diameter, surface area occupied per copolymer chain, and the mean aggregation number (Nagg). The scaling exponent derived from a double-logarithmic plot of core diameter vs PBzMA DP suggests that the conformation of the PBzMA chains is intermediate between the collapsed and fully extended state. This is in good agreement with 1H NMR studies, which suggest that only 5-13% of the BzMA residues of the core-forming chains are solvated. The Nagg values calculated from SAXS and MALLS are in good agreement and scale approximately linearly with PBzMA DP. This suggests that spherical micelles grow in size not only as a result of the increase in copolymer molecular weight during the PISA synthesis but also by exchange of individual copolymer chains between micelles and/or by sphere-sphere fusion events.
| S-EPMC4745608 | biostudies-literature
Project description:Carbon fibers have high surface areas and rich functionalities for interacting with ions, molecules, and particles. However, the control over their porosity remains challenging. Conventional syntheses rely on blending polyacrylonitrile with sacrificial additives, which macrophase-separate and result in poorly controlled pores after pyrolysis. Here, we use block copolymer microphase separation, a fundamentally disparate approach to synthesizing porous carbon fibers (PCFs) with well-controlled mesopores (~10 nm) and micropores (~0.5 nm). Without infiltrating any carbon precursors or dopants, poly(acrylonitrile-block-methyl methacrylate) is directly converted to nitrogen and oxygen dual-doped PCFs. Owing to the interconnected network and the highly optimal bimodal pores, PCFs exhibit substantially reduced ion transport resistance and an ultrahigh capacitance of 66 μF cm-2 (6.6 times that of activated carbon). The approach of using block copolymer precursors revolutionizes the synthesis of PCFs. The advanced electrochemical properties signify that PCFs represent a new platform material for electrochemical energy storage.
| S-EPMC6358319 | biostudies-literature
Project description:TEM-89 (CMT-3) is the first complex mutant beta-lactamase produced by a clinical strain of Proteus mirabilis (strain Pm 631). This new enzyme, which has a pI of 6.28, is derived from TEM-3 and has a single amino acid substitution also encountered in TEM-59 (inhibitor-resistant TEM beta-lactamase IRT-17): Ser-130 to Gly. TEM-89 hydrolyzed penicillins to the same extent that TEM-3 did but lost almost all hydrolytic activity for cephalosporins and, like TEM-59, was highly resistant to inhibitors.
| S-EPMC90874 | biostudies-literature
Project description:IntroductionTraditionally, the origin of the third germ layer and its special formation of coelomic cavities by enterocoely is regarded to be an informative character in phylogenetic analyses. In early deuterostomes such as sea urchins, the mesoderm forms through a single evagination pinching off from the apical end of the archenteron which then gives off mesocoela and metacoela on each side. This echinoid-type coelom formation has conventionally been assumed to be ancestral for Deuterostomia. However, recent phylogenetic analyses show that Echinodermata hold a more derived position within Deuterostomia. In this regard a subgroup of Hemichordata, namely enteropneusts, seem to host promising candidates, because they are supposed to have retained many ancestral deuterostome features on the one hand, and furthermore share some characteristics with chordates on the other hand. In enteropneusts a wide range of different modes of coelom formation has been reported and in many cases authors of the original observations carefully detailed the limitations of their descriptions, while these doubts disappeared in subsequent reviews. In the present study, we investigated the development of all tissues in an enteropneust, Saccoglossus kowalevskii by using modern morphological techniques such as complete serial sectioning for LM and TEM, and 3D-reconstructions, in order to contribute new data to the elucidation of deuterostome evolution.ResultsOur data show that in the enteropneust S. kowalevskii all main coelomic cavities (single protocoel, paired mesocoela and metacoela) derive from the endoderm via enterocoely as separate evaginations, in contrast to the aforementioned echinoid-type. The anlagen of the first pair of gill slits emerge at the late kink stage (~96 h pf). From that time onwards, we documented a temporal left-first development of the gill slits and skeletal gill rods in S. kowalevskii until the 2 gill slit juvenile stage.ConclusionsThe condition of coelom formation from separate evaginations is recapitulated in the larva of amphioxus and can be observed in crinoid echinoderms in a similar way. Therefore, coelom formation from separated pouches, rather than from a single apical pouch with eventual subdivision is suggested as the ancestral type of coelom formation for Deuterostomia. Left-right asymmetries are also present in echinoderms (rudiment formation), cephalochordates (larval development), tunicates (gut coiling) and vertebrates (visceral organs), and it is known from other studies applying molecular genetic analyses that genes such as nodal, lefty and pitx are involved during development. We discuss our findings in S. kowalevskii in the light of morphological as well as molecular genetic data.
| S-EPMC4081662 | biostudies-literature
Project description:Ultrastructural characterisation is important for understanding carbon nanotube (CNT) toxicity and how the CNTs interact with cells and tissues. The standard method for this involves using transmission electron microscopy (TEM). However, in particular, the sample preparation, using a microtome to cut thin sample sections for TEM, can be challenging for investigation of regions with agglomerations of large and stiff CNTs because the CNTs cut with difficulty. As a consequence, the sectioning diamond knife may be damaged and the uncut CNTs are left protruding from the embedded block surface excluding them from TEM analysis. To provide an alternative to ultramicrotomy and subsequent TEM imaging, we studied focused ion beam scanning electron microscopy (FIB-SEM) of CNTs in the lungs of mice, and we evaluated the applicability of the method compared to TEM. FIB-SEM can provide serial section volume imaging not easily obtained with TEM, but it is time-consuming to locate CNTs in the tissue. We demonstrate that protruding CNTs after ultramicrotomy can be used to locate the region of interest, and we present FIB-SEM images of CNTs in lung tissue. FIB-SEM imaging was applied to lung tissue from mice which had been intratracheally instilled with two different multiwalled CNTs; one being short and thin, and the other longer and thicker. FIB-SEM was found to be most suitable for detection of the large CNTs (Ø ca. 70 nm), and to be well suited for studying CNT agglomerates in biological samples which is challenging using standard TEM techniques.
| S-EPMC4039996 | biostudies-literature