In Situ Ellipsometric Monitoring of Gold Nanorod Metamaterials Growth.
Ontology highlight
ABSTRACT:
SUBMITTER: Morgan F
PROVIDER: S-EPMC5460957 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Non-equilibrium hot carriers formed near the interfaces of semiconductors or metals play a crucial role in chemical catalysis and optoelectronic processes. In addition to optical illumination, an efficient way to generate hot carriers is by excitation with tunnelling electrons. Here, we show that the generation of hot electrons makes the nanoscale tunnel junctions highly reactive and facilitates strongly confined chemical reactions that can, in turn, modulate the tunnelling processes. We designed a device containing an array of electrically driven plasmonic nanorods with up to 1011 tunnel junctions per square centimetre, which demonstrates hot-electron activation of oxidation and reduction reactions in the junctions, induced by the presence of O2 and H2 molecules, respectively. The kinetics of the reactions can be monitored in situ following the radiative decay of tunnelling-induced surface plasmons. This electrically driven plasmonic nanorod metamaterial platform can be useful for the development of nanoscale chemical and optoelectronic devices based on electron tunnelling.
| S-EPMC5805091 | biostudies-literature
Project description:Environmentally responsive nanoassemblies based on polypeptides and nanoparticles can have a number of promising biological/biomedical applications. We report the generation of gold nanorod (GNR)-elastin-like polypeptide (ELP) nanoassemblies whose optical response can be manipulated based on exposure to near-infrared (NIR) light. Cysteine-containing ELPs were self-assembled on GNRs mediated by gold-thiol bonds, leading to the generation of GNR-ELP nanoassemblies. Exposure of GNR-ELP assemblies to NIR light resulted in the heating of GNRs due to surface plasmon resonance. Heat transfer from the GNRs resulted in an increase in temperature of the self-assembled ELP above its transition temperature (Tt), which led to a phase transition and aggregation of the GNR-ELP assemblies. This phase transition was detected using an optical readout (increase in optical density); no change in optical behavior was observed in the case of either ELP alone or GNR alone. The optical response was reproducibele and reversible across a number of cycles following exposure to or removal of the laser excitation. Our results indicate that polypeptides may be interfaced with GNRs resulting in optically responsive nanoasssemblies for sensing and drug delivery applications.
| S-EPMC2888953 | biostudies-literature
Project description:Respiratory syncytial virus (RSV) is a major cause of pneumonia and wheezing in infants and the elderly, but to date there is no licensed vaccine. We developed a gold nanorod construct that displayed the major protective antigen of the virus, the fusion protein (F). Nanorods conjugated to RSV F were formulated as a candidate vaccine preparation by covalent attachment of viral protein using a layer-by-layer approach. In vitro studies using ELISA, electron microscopy and circular dichroism revealed that conformation-dependent epitopes were maintained during conjugation, and transmission electron microscopy studies showed that a dispersed population of particles could be achieved. Human dendritic cells treated with the vaccine induced immune responses in primary human T cells. These results suggest that this vaccine approach may be a potent method for immunizing against viruses such as RSV with surface glycoproteins that are targets for the human immune response.
| S-EPMC3754908 | biostudies-literature
Project description:In this work, multifunctional nanocarriers consisting of poly(sodium-4-styrenesulfonate) (PSS)/doxorubicin (DOXO)/poly-l-lysine hydrobromide (PLL)/hyaluronic acid (HA)-coated and (PSS/DOXO/PLL)2/HA-coated gold nanorods were assembled by the layer-by-layer technique with the aims of coupling the plasmonic photothermal properties of the metal nanoparticles for plasmonic hyperthermia and the chemoaction of drug DOXO for potential intended combinatorial cancer therapeutics in the future as well as providing different strategies for the controlled and sustained release of the cargo drug molecules. To do that, DOXO could be successfully loaded onto the hybrid nanoconstructs through electrostatic interactions with high efficiencies of up to ca. 78.3 ± 6.9% for the first formed drug layer and 56 ± 13% for the second one, with a total efficiency for the whole system [(PSS/DOXO/PLL)2/HA-coated NRs] of ca. 65.7 ± 1.4%. Nanohybrid internalization was observed to be enhanced by the outer HA layer, which is able to target the CD44 receptors widely overexpressed in some types of cancers as lung, breast, or ovarian ones. Hence, these nanohybrid systems might be versatile nanoplatforms to simultaneously deliver sufficient heat for therapeutic plasmonic hyperthermia and the anticancer drug. Two controlled mechanisms were proposed to modulate the release of the chemodrug, one by means of the enzymatic degradable character of the PLL layer and another by the modulation of the interactions between the polymeric layers through the exploitation of the optical properties of the hybrid particles under near infrared (NIR) laser irradiation. The combination of this bimodal therapeutic approach exerted a synergistic cytotoxic effect on both HeLa and MDA-MB-231 cancer cells in vitro. Cell death mechanisms were also analyzed, elucidating that plasmonic photothermal therapy induces cell necrosis, whereas DOXO activates the cell apoptotic pathway. Therefore, the present NIR laser-induced targeted cancer thermo/chemotherapy represents a novel targeted anticancer strategy with easy control on demand and suitable therapeutic efficacy.
| S-EPMC6217551 | biostudies-literature
Project description:Conjugation of biomolecules on gold nanorod (GNR) surfaces is the basis for successful applications in biosensing, imaging, and drug delivery. Current functionalization methods are often problematic, involving multi-step nanoparticle modification to replace surfactant bilayer, delicate nanoparticle protection during surfactant exchange, and material loss due to inevitable aggregation. Instead of intensive surface modification of GNRs, we describe herein a facile method to functionalize gold nanorod surfaces via covalent Au-S bonds by thiolating receptors. The resulting GNR-bioconjugates showed superior dispersion and stability in buffer for months without morphology change and aggregation. ELISA tests confirmed the high biofunctionality of the thiolated anti-IgG moieties immobilized on the GNR surfaces. Furthermore, this simple method facilitated a straightforward functionalization of GNR assembly on glass substrate to construct a specific biochip, which can detect human IgG targets in a label-free fashion with high sensitivity and specificity. Compared to electropolymeric coating to functionalize the GNR, our method exhibited a five-fold enhancement in the spectral sensitivity to refractive index change caused by the target binding. This universal GNR bioconjugation method can be extended to bind different proteins and antibodies for development of biosensors or drug delivery.
| S-EPMC4856215 | biostudies-literature
Project description:In this paper, a fine gold nanostructure synthesized on selective planar microelectrodes in micro-chip is realized by using an advanced hybrid fabrication approach incorporating growth of nanorods (NRs) with gold electroplating. By this developed nanostructure, integration of in-situ surface-enhanced Raman spectroscopy (SERS) detection with electrochemical impedance spectroscopy (EIS) measurement for label-free, nondestructive, real-time and rapid monitoring on a single cell has been achieved. Moreover, parameters of Au nanostructures such as size of nanoholes/nanogaps can be controllably adjusted in the fabrication. We have demonstrated a SERS enhancement factor of up to ~2.24 × 10(6) and double-layer impedance decrease ratio of 90% ~ 95% at low frequency range below 200 kHz by using nanostructured microelectrodes. SERS detection and in-situ EIS measurement of a trapped single cell by using planar microelectrodes are realized to demonstrate the compatibility, multi-functions, high-sensitivity and simplicity of the micro-chip system. This dual function platform integrating SERS and EIS is of great significance in biological, biochemical and biomedical applications.
| S-EPMC4642340 | biostudies-literature
Project description:Silver nanorod arrays prepared by oblique angle deposition (AgOADs) represent versatile, simple and inexpensive substrates for high sensitivity surface enhanced Raman scattering (SERS) applications. Their anisotropic nature suggests that their optical responses such as the SERS signal, the depolarization ratio, reflectivity and ellipsometric parameters critically depend on the states of polarization, nanorod angular arrangement and specific illumination-observation geometry. SERS polarization and angular dependences of AgOADs were measured using methylene blue (MB) molecule. Our study constitutes, to our knowledge, the most detailed investigation of such characteristics of plasmonic nanostructures to date. This is due to the 90°-scattering geometry used in which two out of three Euler angles determining the nanorod spatial orientation and four polarization combinations can be varied simultaneously. We attributed the anisotropic optical response to anisotropic (pseudo)refractive index caused by different periodicity of our structures in different directions since the plasmonic properties were found rather isotropic. For the first time we demonstrate very good correspondence between SERS intensities and ellipsometric parameters for all measured configurations as compared on the basis of the surface selection rules. Obtained results enable quantitative analysis of MB Raman tensor elements, indicating that the molecules adsorb predominantly with the symmetry axis perpendicular to the surface.
| S-EPMC5487367 | biostudies-literature
Project description:In this work, a DNA inter-strand replacement strategy for therapeutic activity is successfully designed for multimodal therapy. In this multimodal therapy, chlorin e6 (Ce6) photosensitizer molecules are used for photodynamic therapy (PDT), while aptamer-AuNRs, are used for selective binding to target cancer cells and for photothermal therapy (PTT) with near infrared laser irradiation. Aptamer Sgc8, which specifically targets leukemia T cells, is conjugated to an AuNR by a thiol-Au covalent bond and then hybridized with a Ce6-labeled photosensitizer/reporter to form a DNA double helix. When target cancer cells are absent, Ce6 is quenched and shows no PDT effect. However, when target cancer cells are present, the aptamer changes structure to release Ce6 to produce singlet oxygen for PDT upon light irradiation. Importantly, by combining photosensitizer and photothermal agents, PTT/PDT dual therapy supplies a more effective therapeutic outcome than either therapeutic modality alone.
| S-EPMC4133987 | biostudies-literature
Project description:The assembly of nanostructures with plausible statistical orientations has provided the opportunity to correlate physical observables to develop a diverse range of niche applications. The dimeric configurations of gold nanorods have been chosen as atypical model systems to correlate optoelectronic with mechanical properties at a number of combinations of angular orientations. Metals are considered as conductors in electronics and reflectors in optics - therefore, metallic particles at the nanoscale exhibit unique optoelectronic characteristics that enable the design of materials to meet the demand of the modern world. Gold nanorods have often been adopted as prototypical anisotropic nanostructures owing to their excellent shape-selective plasmonic tunability in the vis-NIR region. When a pair of metallic nanostructures is sufficiently close to exhibit electromagnetic interaction, the evolution of collective plasmon modes, substantial enhancement of the near-field and strong squeezing of the electromagnetic energy at the interparticle spatial region of the dimeric nanostructures occur. The localised surface plasmon resonance energies of the nanostructured dimers strongly depend on the geometry as well as the relative configurations of the neighbouring particle pairs. Recent advances in the 'tips and tricks' guide have even made it possible to assemble anisotropic nanostructures in a colloidal dispersion. The optoelectronic characteristics of gold nanorod homodimers at different mutual orientations with statistical variation of the angle between 0 and 90° at particular interparticle distances have been elucidated from both theoretical and experimental perspectives. It has been observed that the optoelectronic properties are governed by mechanical aspects of the nanorods at different angular orientations of the dimers. Therefore, we have approached the design of an optoelectronic landscape through the correlation of the plasmonics and photocapacitance through the optical torque of gold nanorod dimers.
| S-EPMC10044666 | biostudies-literature
Project description:Polyaniline with oriented nanorod arrays could provide high surface area and relaxed nanostructure to optimize ion diffusion paths, thus enhancing the performance of the device. In this paper, we designed an all-solid symmetrical supercapacitor with good performance based on polyaniline nanorod arrays in situ-grown on a graphite flake free-standing substrate. The specific capacitance, cycle stability, and energy density of the prepared supercapacitor device were 135 F/g, 75.4% retention after 1500 cycles, and the energy density is 18.75 W h/kg at a power density of 500 W/kg. The good performance of the supercapacitor device was obviously related to the oriented nanorod arrays of polyaniline/graphite flakes. In order to find the application of the prepared supercapacitor device, the tandem device consisting of three single supercapacitor devices connected in series had been used to drive small electronic equipment. The red light-emitting diode and chronograph could be easily driven by the 3-series supercapacitor devices. These results indicated that the prepared supercapacitor device based on the polyaniline/graphite flake electrode had potential applications in energy storage devices.
| S-EPMC7758985 | biostudies-literature