Dataset Information

"Direct vision" operation of posterior atlantoaxial transpedicular screw fixation for unstable atlantoaxial fractures: A retrospective study.

ABSTRACT:

Background

The posterior screw fixation in atlas via posterior arch and lateral mass, also called C1 "pedicle" screw, combined with C2 pedicle screw fixiation has shown better biomechanical stability in unstable atlantoaxial fractures. However, its popularization has to fulfill the limitation imposed by anatomical characteristics. The aim of this study was to explore the manipulation, effect, and safety of the atlantoaxial transpedicular screw fixation under "direct vision" for the treatment of unstable atlantoaxial fracture.

Methods

All the patients diagnosed with unstable atlantoaxial fracture, who received surgery treatment of C1,C2 internal fixation from January 2012 to December 2014 were reviewed. Only these patients that were diagnosed with atlantoaxial unstability secondary to trauma and were treated with atlantoaxial transpedicular screw fixation under "direct vision" and iliac autograft were included. The safety of transpedicular screw placement, postoperative outcome, atlantoaxial stability, autograft fusion, and complications was observed and analyzed retrospectively. The pain visual analog scale (VAS) and the Japanese Orthopedic Association (JOA) score were used as surgical curative effect evaluation standards.

Results

We reviewed a total of 92 patients diagnosed with unstable atlantoaxial fracture, who received surgery treatment of C1,C2 internal fixation from January 2012 to December 2014, and 87 patients were treated with atlantoaxial transpedicular screw fixation under "direct vision" and were included this analysis. A total of 306 transpedicular screws in atlas and axis were placed successfully. All cases were followed-up >12 months. The overall breach rate was 11.36%. None of the breaches resulted in new-onset neurological sequela. The neurological status in cases with bilateral upper extremities numbness and lower extremities weakness had improved after surgery. At the latest follow-up, the neck VAS and JOA scores were significantly improved (P < .01) than those preoperatively. No cases demonstrated implantation failure and bone graft absorption on the postoperative x-ray films and CT scans.

Conclusion

Atlantoaxial transpedicular screw fixation under "direct vision" and iliac autograft for the treatment of unstable atlantoaxial fracture has shown simple manipulation and efficient performance. Thus, the technique of C1-C2 fixation is feasible in treating unstable atlantoaxial fracture.

SUBMITTER: Cao L

PROVIDER: S-EPMC5484189 | biostudies-literature | 2017 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

"Direct vision" operation of posterior atlantoaxial transpedicular screw fixation for unstable atlantoaxial fractures: A retrospective study.

Cao Liangliang L Yang Erzhu E Xu Jianguang J Lian Xiaofeng X Cai Bin B Liu Xiaokang X Zhang Guowang G

Medicine 20170601 25

<h4>Background</h4>The posterior screw fixation in atlas via posterior arch and lateral mass, also called C1 "pedicle" screw, combined with C2 pedicle screw fixiation has shown better biomechanical stability in unstable atlantoaxial fractures. However, its popularization has to fulfill the limitation imposed by anatomical characteristics. The aim of this study was to explore the manipulation, effect, and safety of the atlantoaxial transpedicular screw fixation under "direct vision" for the treat ...[more]

PMID: 28640081

Similar Datasets

Project description:BACKGROUND:It is still unknown whether bioabsorbable magnesium (Mg) screws provide an advantage over titanium screws in the treatment of medial malleolar (MM) fractures. The purpose of this retrospective study is to compare the clinical and radiological outcomes of MM fractures fixed with either bioabsorbable Mg screws or conventional titanium screws. MATERIALS AND METHODS:A cohort of 48 patients with MM fractures who underwent compression screw fixation was retrospectively reviewed. Twenty-three patients (16 male, 7 female; mean age: 37.9?±?17.7 years) were treated with bioabsorbable Mg screws, and 25 patients (14 male, 11 female; mean age: 45.0?±?15.7 years) were treated with conventional titanium screw fixation. All patients were followed up for at least 1 year, with a mean time of 24.6?±?10.5 months (12-53 months). The American Orthopedic Foot and Ankle Society (AOFAS) scale was used to evaluate the clinical results. The Kellgren-Lawrence (KL) osteoarthritis grading was used to evaluate posttraumatic osteoarthritis on final ankle radiographs. Fracture union, rate of implant removal, and complications were recorded. Comparative analysis of two independent groups was performed using the chi-squared test and the Mann-Whitney U-test. RESULTS:The two groups were comparable concerning demographic and clinical characteristics. Age (p?=?0.146), sex (p?=?0.252), side (p?=?0.190), MM fracture type (p?=?0.500), associated fractures (p?=?0.470), and follow-up period (p?=?0.903) were similar between the groups. At final follow-up examination, AOFAS score (p?=?0.191) was similar between groups. Fracture union was achieved in all cases. Grade of posttraumatic osteoarthritis, according to KL, was equally distributed in both groups (p?=?0.074). No deep infection or osteomyelitis was seen. Five patients in the titanium screw group underwent implant removal, due to pain in three of them and difficulty in wearing shoes in the other two (p?=?0.031). Implant removal was performed after a mean of 14.2?±?3.1 months (12-19 months). CONCLUSIONS:Bioabsorbable Mg and titanium screws had similar therapeutic efficacy in MM fracture fixation regarding functional and radiological outcomes. However, the rate of implant removal was higher with titanium screws. Bioabsorbable Mg screws may be a favorable fixation option since secondary implant removal procedures can be prevented. LEVEL OF EVIDENCE:Level IV, Retrospective case series.

Project description:IntroductionThere is a high incidence of vertebral burst fractures following low velocity trauma in the elderly. Treatment of unstable vertebral burst fractures using the same principles like in stable vertebral burst fractures may show less favourable results in terms of fracture reduction, maintenance of reduction and cement leakage. In order to address these shortcomings this study introduces cementless fixation of unstable vertebral burst fractures using internal fixators and expandable intravertebral titanium mesh cages in a one-stage procedure via minimum-invasive techniques.Material and methodsA total of 16 consecutive patients (median age 76 years, range 58-94) with unstable thoracolumbar burst fractures and concomitant osteoporosis were treated by an internal fixator inserted via minimum invasive technique one level above and below the fractured vertebra. Fracture reduction was achieved and maintained by transpedicular placement of two titanium mesh cages into the fractured vertebral body during the same procedure. Intra- and postoperative safety of the procedure as well as analysis of reduction quality was analysed by 3D C-arm imaging or CT, respectively. Clinical and radiographic follow-up averaged 10.4 months (range 4.5-24.5).ResultsStabilization of the collapsed vertebral body was achieved in all 16 cases without any intraoperative complication. Surgical time averaged 102 ± 6.6 minutes (71-194). The postoperative kyphotic angle (KA) and Cobb angle revealed significant improvements (KA 13.7° to 7.4°, p < 0.001; Cobb 9.6° to 6.0°, p < 0.002) with partial loss of reduction at final follow-up (KA 8.3°, Cobb 8.7°). VAS (Visual Analogue Scale) improved from 7.6 to 2.6 (p < 0.001). Adjacent fractures were not observed. One minor (malposition of pedicle screw) complication was encountered.ConclusionCementless fixation of osteoporotic burst fractures revealed substantial pain relief, adequate maintenance of reduction and a low complication rate. Bony healing after unstable osteoporotic burst fractures is possible.Trial registrationwww.germanctr.de DRKS00005657.

Project description:BackgroundThe spine surgeons have been combining anterior and posterolateral fusion (circumferential fusion) as the final solution to treat spinal disorders and many have been using it to treat failed back surgery syndrome (FBSS). In present study, we analyzed and compared the clinical and radiological outcomes in patients with transpedicular screw fixation and intervertebral autogenous posterior iliac crest bone graft or in patients with transpedicular screw fixation and intervertebral B-Twin system for FBSS with a follow-up period of 10 years after the surgery.Materials and methodsThis study was a retrospective case study performed on 55 patients with FBSS. Clinical and radiological changes were compared between the two groups of patients on the basis of improvement of back pain, radicular pain, and work capacity. Outcome was measured in terms of Oswestry Low Back Pain Disability Index, and the changes in pain and function were documented every year from before surgery until 2012. We analyzed the evolution of 55 cases of FBSS those underwent segmental circumferential posterior fusions from June 2001 to February 2003, operated by a single surgeon and followed up during 10 years until February 2012. The patients were divided into 2 groups: In 25 patients, posterolateral fusions with Legacy™ (Medtronic, Inc. NYSE: MDT) screws and intersomatic autogenous posterior iliac crest bone graft was performed, and, in 30 patients, posterolateral fusions with the same screws and intersomatic fusion B-Twin (Biomet Spain Orthopaedics, S.L.) system was performed. In all cases, we used posterior lumbar interbody fusion (PLIF)/transforaminal lumbar interbody fusion (TLIF) approach for intervertebral graft, and the artrodesis was supplemented at intertransverse level with Autologus Growth Factor (AGF-MBA INCORPORADO, S.A.). The outcome was measured in terms of Oswestry Low Back Pain Disability Index, and the changes in pain and function were documented every year and compared from before surgery to the final follow-up visit. Preoperative and postoperative scores were available for all patients.ResultsThe average age of these patients was comparable in both groups (mean age 42.6 versus 50.2 years). The average follow-up period was 200.6 months in the first group (screws and intersomatic bone) and 184.4 months in the second group (screws and B-Twin). In the autologus bone graft group, the CT scan and Rx study revealed loss of height of intervertebral space between 25% and 45% of 24 h postoperative height of intervertebral operated disc, and the patients continued to lose the height until 20 months after the surgery. In the B Twin group, the CT scan and Rx study revealed a loss of height of the intervertebral level of 8-12% over a period of 9 months follow-up, followed by stability. A total of 31 patients (55%) had improved Oswestry Low Back Pain Disability Index >40% of the total possible points, although this did not reflect in PSI or return to work rate.ConclusionsThe patients with rigid fixation do well in terms of correction of lumbar lordosis, but they do not do well in terms of recurrence of pain. Furthermore, they need some kind of intervention to control pain after the first year after surgery. In patients in whom bone graft is used, although they do not maintain and sustain the lumbar lordosis in the long term, they have less recurrence of pain with less chances of intervention for pain control.

Project description:ObjectiveThe purpose of this study was to analyse the biomechanical characteristics of pedicle screws with different placement methods and diameters in the treatment of Tile C1 pelvic fractures by finite element simulation technology and to compare them with the plate fixation model to verify the effectiveness of pedicle screw fixation.MethodsA three-dimensional digital model of a normal pelvis was obtained using computed tomography images. A finite element model of a normal pelvis containing major ligaments was built and validated (Model 1). Based on the verified normal pelvis finite element model, a Tile C1 pelvic fracture model was established (Model 2), and then a plate fixation model (Model 3) and a pedicle screw fixation model with different screw placement methods and diameters were established (Models 4-15). For all pelvic fracture fixation models, a vertical load of 500 N was applied on the upper surface of the sacrum to test the displacement and stress distribution of the pelvis in the standing state with both legs.ResultsThe finite element simulation results showed the maximum displacement of Model 1 and Models 3-15 to be less than 1 mm. The overall maximum displacement of Models 4-15 was slightly larger than that of Model 3 (the maximum difference was 177.91×10-3 mm), but the maximum displacement of iliac bone and internal fixation in Models 4-15 was smaller than that of Model 3. The overall maximum stress (maximum stress of the ilium) and maximum stress of internal fixation in Models 4-15 were less than those in Model 3. The maximum displacement difference and maximum stress difference at the fracture of the pubic ramus between each fixed model were less than 0.01 mm and 1 MPa, respectively. The greater the diameter and number of pedicle screws were, the smaller the maximum displacement and stress of the pelvic fracture models were.The maximum displacement and stress of the pelvic fracture models of the screws placed on the injured side of the pubic region were smaller than the screws on the healthy side.ConclusionBoth the anterior and posterior pelvic rings are fixed with a pedicle screw rod system for treatment of Tile C1 pelvic fractures, which can obtain sufficient biomechanical stability and can be used as a suitable alternative to other implants.The greater the diameter and number of pedicle screws were, the greater the pelvic stability was, and the greater was the stability of the screws placed on the injured side of the pubic region than the screws on the healthy side.

Dataset Information

"Direct vision" operation of posterior atlantoaxial transpedicular screw fixation for unstable atlantoaxial fractures: A retrospective study.

Background

Methods

Results

Conclusion

Publications

"Direct vision" operation of posterior atlantoaxial transpedicular screw fixation for unstable atlantoaxial fractures: A retrospective study.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets