Contribution of the PDL to Osteotomy Repair and Implant Osseointegration.
Ontology highlight
ABSTRACT:
SUBMITTER: Pei X
PROVIDER: S-EPMC5502960 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:BackgroundAutologous bone can be harvested from the flutes of a conventional drill or from a bone scraper; here we compared whether autologous bone chips generated by a new slow-speed instrument were more osteogenic than the bone chips generated by conventional drills or bone scrapers. Additionally, we tested whether the osteogenic potential of bone chips could be further improved by exposure to a Wnt signaling (WNT) therapeutic.MethodsOsteotomies were prepared in fresh rat maxillary first molar extraction sockets using a conventional drill or a new osseo-shaping instrument; titanium alloy implants were placed immediately thereafter. Using molecular/cellular and histologic analyses, the fates of the resulting bone chips were analyzed. To test whether increasing WNT signaling improved osteogenesis in an immediate post-extraction implant environment, a WNT therapeutic was introduced at the time of implant placement.ResultsBone collected from a conventional drill exhibited extensive apoptosis; in contrast, bone generated by the new instrument remained in situ, which preserved their viability. Also preserved was the viability of the osteoprogenitor cells attached to the bone chips. Exogenous treatment with a WNT therapeutic increased the rate of osteogenesis around immediate post-extraction implants.ConclusionsCompared with conventional drills or bone scrapers, a new cutting instrument enabled concomitant site preparation with autologous bone chip collection. Histology/histomorphometric analyses revealed that the bone chips generated by this new tool were more osteogenic and could be further enhanced by exposure to a WNT therapeutic. Even though gaps still existed in placebo controls and liposomal WNT3A (L-WNT3A) cases, the area of peri-implant bone was significantly greater in L-WNT3A treated sites.
| S-EPMC7554098 | biostudies-literature
Project description:The aim of this study was to gain insights into the biology and mechanics of immediate postextraction implant osseointegration. To mimic clinical practice, murine first molar extraction was followed by osteotomy site preparation, specifically in the palatal root socket. The osteotomy was positioned such that it removed periodontal ligament (PDL) only on the palatal aspect of the socket, leaving the buccal aspect undisturbed. This strategy created 2 distinct peri-implant environments: on the palatal aspect, the implant was in direct contact with bone, while on the buccal aspect, a PDL-filled gap existed between the implant and bone. Finite element modeling showed high strains on the palatal aspect, where bone was compressed by the implant. Osteocyte death and bone resorption predominated on the palatal aspect, leading to the loss of peri-implant bone. On the buccal aspect, where finite element modeling revealed low strains, there was minimal osteocyte death and robust peri-implant bone formation. Initially, the buccal aspect was filled with PDL remnants, which we found directly provided Wnt-responsive cells that were responsible for new bone formation and osseointegration. On the palatal aspect, which was devoid of PDL and Wnt-responsive cells, adding exogenous liposomal WNT3A created an osteogenic environment for rapid peri-implant bone formation. Thus, we conclude that low strain and high Wnt signaling favor osseointegration of immediate postextraction implants. The PDL harbors Wnt-responsive cells that are inherently osteogenic, and if the PDL tissue is healthy, it is reasonable to preserve this tissue during immediate implant placement.
| S-EPMC6055256 | biostudies-literature
Project description:This study aimed to compare and verify the osseointegration performance of a novel implant (NI) in vivo, which could provide a useful scientific basis for the further development of NIs. Thirty-two NIs treated with hydrofluoric acid and anodization and sixteen control implants (CIs) were placed in the mandibles of 8 beagles. Micro-CT showed that the trabecular number (Tb.N) significantly increased and trabecular separation (Tb.Sp) significantly decreased in the NIs at 2 weeks. Significant differences were found in the trabecular thickness, Tb.N, Tb.Sp, bone surface/bone volume ratio, and bone volume/total volume ratio between the two groups from the 2nd-4th weeks. However, there were no significant differences between the two groups in the bone volume density at 2, 4, 8, or 12 weeks or bone-implant contact at 2 or 4 weeks, but the BIC in the CIs was higher than that in the NIs at the 8th and 12th weeks. Meanwhile, the histological staining showed a similar osseointegration process between the two groups over time. Overall, the NIs could be used as new potential implants after further improvement.
| S-EPMC7900171 | biostudies-literature
Project description:Many of our assumptions concerning oral implant osseointegration are extrapolated from experimental models studying skeletal tissue repair in long bones. This disconnect between clinical practice and experimental research hampers our understanding of bone formation around oral implants and how this process can be improved. We postulated that oral implant osseointegration would be fundamentally equivalent to implant osseointegration elsewhere in the body. Mice underwent implant placement in the edentulous ridge anterior to the first molar and peri-implant tissues were evaluated at various timepoints after surgery. Our hypothesis was disproven; oral implant osseointegration is substantially different from osseointegration in long bones. For example, in the maxilla peri-implant pre-osteoblasts are derived from cranial neural crest whereas in the tibia peri-implant osteoblasts are derived from mesoderm. In the maxilla, new osteoid arises from periostea of the maxillary bone but in the tibia the new osteoid arises from the marrow space. Cellular and molecular analyses indicate that osteoblast activity and mineralization proceeds from the surfaces of the native bone and osteoclastic activity is responsible for extensive remodeling of the new peri-implant bone. In addition to histologic features of implant osseointegration, molecular and cellular assays conducted in a murine model provide new insights into the sequelae of implant placement and the process by which bone is generated around implants.
| S-EPMC4962868 | biostudies-literature
Project description:Osseointegration is the key issue for implant success. The in vivo properties of cell populations driving the osseointegration process have remained largely unknown. In the current study, using tissue clearing-based 3-dimensional imaging and transgenic mouse model-based lineage tracing methods, we identified Gli1+ cells within alveolar bone marrow and their progeny as the cell population participating in extraction socket healing and implant osseointegration. These Gli1+ cells are surrounding blood vessels and do not express lineage differentiation markers. After tooth extraction and delayed placement of a dental implant, Gli1+ cells were activated into proliferation, and their descendants contributed significantly to new bone formation. Ablation of Gli1+ cells severely compromised the healing and osseointegration processes. Blockage of canonical Wnt signaling resulted in impaired recruitment of Gli1+ cells and compromised bone healing surrounding implants. Collectively, these findings demonstrate that Gli1+ cells surrounding alveolar bone marrow vasculature are stem cells supporting dental implant osseointegration. Canonical Wnt signal plays critical roles in regulating Gli1+ stem cells.
| S-EPMC8721727 | biostudies-literature
Project description:A variety of clinical classification schemes have been proposed as a means to identify sites in the oral cavity where implant osseointegration is likely to be successful. Most schemes are based on structural characteristics of the bone, for example, the relative proportion of densely compact, homogenous (type I) bone versus more trabeculated, cancellous (type III) bone. None of these schemes, however, consider potential biological characteristics of the bone. Here, we employed multiscale analyses to identify and characterize type I and type III bones in murine jaws. We then combined these analytical tools with in vivo models of osteotomy healing and implant osseointegration to determine if one type of bone healed faster and supported osseointegration better than another. Collectively, these studies revealed a strong positive correlation between bone remodeling rates, mitotic activity, and osteotomy site healing in type III bone and high endogenous Wnt signaling. This positive correlation was strengthened by observations showing that the osteoid matrix that is responsible for implant osseointegration originates from Wnt-responsive cells and their progeny. The potential application of this knowledge to clinical practice is discussed, along with a theory unifying the role that biology and mechanics play in implant osseointegration.
| S-EPMC5480808 | biostudies-literature
Project description:At present, limited functional data exists regarding the application and use of biomechanical and imaging technologies for oral implant osseointegration assessment. The objective of this investigation was to determine the functional apparent moduli (FAMs) that could predict the dynamics of oral implant osseointegration. Using an in vivo dental implant osseous healing model, two FAMs, functional bone apparent modulus (FBAM), and composite tissue apparent modulus (FCAM), of the selected peri-implant structures were calculated via microcomputed tomography (micro-CT) and finite element (FE) simulations in order to support this concept. Results showed significant sensitivity between FAMs and micro-CT parameters, especially between bone mineral density and FBAM, while at extraction defect sites the strongest correlations existed between bone-implant contact and FCAM. Significant enhancement of FCAM indicated progressive functional repair during early osseointegration. Further, the resultant interfacial resistance was predicted by bone mineral content (BMC) and FBAM within a approximately 200 microm peri-implant thickness, while the extraction defects gave zones of approximately 575 microm and 200 microm for BMC and FCAM, respectively. These results suggest that the function of dental implant support can be predicted from a peri-implant structural zone. We conclude that FAMs can be used to predict the dynamics of dental implant osseointegration in vivo.
| S-EPMC2881481 | biostudies-literature
Project description:Platelet-derived growth factor-BB (PDGF-BB) stimulates repair of healing-impaired chronic wounds such as diabetic ulcers and periodontal lesions. However, limitations in predictability of tissue regeneration occur due, in part, to transient growth factor bioavailability in vivo. Here, we report that gene delivery of PDGF-B stimulates repair of oral implant extraction socket defects. Alveolar ridge defects were created in rats and were treated at the time of titanium implant installation with a collagen matrix containing an adenoviral (Ad) vector encoding PDGF-B (5.5 x 10(8) or 5.5 x 10(9) pfu ml(-1)), Ad encoding luciferase (Ad-Luc; 5.5 x 10(9) pfu ml(-1); control) or recombinant human PDGF-BB protein (rhPDGF-BB, 0.3 mg ml(-1)). Bone repair and osseointegration were measured through backscattered scanning electron microscopy, histomorphometry, micro-computed tomography and biomechanical assessments. Furthermore, a panel of local and systemic safety assessments was performed. Results indicated that bone repair was accelerated by Ad-PDGF-B and rhPDGF-BB delivery compared with Ad-Luc, with the high dose of Ad-PDGF-B more effective than the low dose. No significant dissemination of the vector construct or alteration of systemic parameters was noted. In summary, gene delivery of Ad-PDGF-B shows regenerative and safety capabilities for bone tissue engineering and osseointegration in alveolar bone defects comparable with rhPDGF-BB protein delivery in vivo.
| S-EPMC2803328 | biostudies-literature
Project description:A firm connection of the bone-implant-fixation system is of utmost importance for patients with cranial defects. In order to improve the connection reliability, the current research focuses on finding the optimal fixation method, as well as selection of the implant manufacturing methods and the used materials. For the latter, implementation of bioactive materials such as hydroxyapatite or other calcium phosphates has also been considered in the literature. The aim of this study was to investigate the effect of gradual osseointegration on the biomechanical performance of cranial Ti6Al4V implants with a deposited HA coating as the osseointegration agent. This effect was assessed by two different computational approaches using finite element method (FEM) modeling. The values of key input parameters necessary for FEM were obtained from experimental plasma spray deposition of HA layers onto Ti6Al4V samples. Immediately upon implantation, the HA layer at the bone-implant contact area brought only a slight decrease in the values of von Mises stress in the implant and the micro-screws when compared to a non-coated counterpart; importantly, this was without any negative trade-off in other important characteristics. The major benefit of the HA coatings was manifested upon the modeled osseointegration: the results of both approaches confirmed a significant reduction of investigated parameters such as the total implant displacements (reduced from 0.050 mm to 0.012 mm and 0.002 mm while using Approach I and II, respectively) and stresses (reduced from 52 MPa to 10 MPa and 1 MPa) in the implanted components in comparison to non-coated variant. This is a very promising result for potential use of thermally sprayed HA coatings for cranial implants.
| S-EPMC8289038 | biostudies-literature
Project description:The host immune response effecting on biomaterials is critical to determine implant fates and bone regeneration property. Bone marrow stem cells (BMSCs) derived exosomes (Exos) contain multiple biosignal molecules and have been demonstrated to exhibit immunomodulatory functions. Herein, we develop a BMSC-derived Exos-functionalized implant to accelerate bone integration by immunoregulation. BMSC-derived Exos were reversibly incorporated on tannic acid (TA) modified sulfonated polyetheretherketone (SPEEK) via the strong interaction of TA with biomacromolecules. The slowly released Exos from SPEEK can be phagocytosed by co-cultured cells, which could efficiently improve the biocompatibilities of SPEEK. In vitro results showed the Exos loaded SPEEK promoted macrophage M2 polarization via the NF-κB pathway to enhance BMSCs osteogenic differentiation. Further in vivo rat air-pouch model and rat femoral drilling model assessment of Exos loaded SPEEK revealed efficient macrophage M2 polarization, desirable new bone formation, and satisfactory osseointegration. Thus, BMSC-derived Exos-functionalized implant exerted osteoimmunomodulation effect to promote osteogenesis.
| S-EPMC7897935 | biostudies-literature