Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Tunable and laser-reconfigurable 2D heterocrystals obtained by epitaxial stacking of crystallographically incommensurate Bi₂Se₃ and MoS₂ atomic layers.

ABSTRACT: Vertical stacking is widely viewed as a promising approach for designing advanced functionalities using two-dimensional (2D) materials. Combining crystallographically commensurate materials in these 2D stacks has been shown to result in rich new electronic structure, magnetotransport, and optical properties. In this context, vertical stacks of crystallographically incommensurate 2D materials with well-defined crystallographic order are a counterintuitive concept and, hence, fundamentally intriguing. We show that crystallographically dissimilar and incommensurate atomically thin MoS₂ and Bi₂Se₃ layers can form rotationally aligned stacks with long-range crystallographic order. Our first-principles theoretical modeling predicts heterocrystal electronic band structures, which are quite distinct from those of the parent crystals, characterized with an indirect bandgap. Experiments reveal striking optical changes when Bi₂Se₃ is stacked layer by layer on monolayer MoS₂, including 100% photoluminescence (PL) suppression, tunable transmittance edge (1.1→0.75 eV), suppressed Raman, and wide-band evolution of spectral transmittance. Disrupting the interface using a focused laser results in a marked the reversal of PL, Raman, and transmittance, demonstrating for the first time that in situ manipulation of interfaces can enable "reconfigurable" 2D materials. We demonstrate submicrometer resolution, "laser-drawing" and "bit-writing," and novel laser-induced broadband light emission in these heterocrystal sheets.

SUBMITTER: Vargas A

PROVIDER: S-EPMC5510971 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Direct observation of multiple rotational stacking faults coexisting in freestanding bilayer MoS2.

Project description:Electronic properties of two-dimensional (2D) MoS2 semiconductors can be modulated by introducing specific defects. One important type of defect in 2D layered materials is known as rotational stacking fault (RSF), but the coexistence of multiple RSFs with different rotational angles was not directly observed in freestanding 2D MoS2 before. In this report, we demonstrate the coexistence of three RSFs with three different rotational angles in a freestanding bilayer MoS2 sheet as directly observed using an aberration-corrected transmission electron microscope (TEM). Our analyses show that these RSFs originate from cracks and dislocations within the bilayer MoS2. First-principles calculations indicate that RSFs with different rotational angles change the electronic structures of bilayer MoS2 and produce two new symmetries in their bandgaps and offset crystal momentums. Therefore, employing RSFs and their coexistence is a promising route in defect engineering of MoS2 to fabricate suitable devices for electronics, optoelectronics, and energy conversion.

| S-EPMC5559605 | biostudies-literature

Ultra-strong nonlinear optical processes and trigonal warping in MoS2 layers.

Project description:Nonlinear optical processes, such as harmonic generation, are of great interest for various applications, e.g., microscopy, therapy, and frequency conversion. However, high-order harmonic conversion is typically much less efficient than low-order, due to the weak intrinsic response of the higher-order nonlinear processes. Here we report ultra-strong optical nonlinearities in monolayer MoS2 (1L-MoS2): the third harmonic is 30 times stronger than the second, and the fourth is comparable to the second. The third harmonic generation efficiency for 1L-MoS2 is approximately three times higher than that for graphene, which was reported to have a large ? (3). We explain this by calculating the nonlinear response functions of 1L-MoS2 with a continuum-model Hamiltonian and quantum mechanical diagrammatic perturbation theory, highlighting the role of trigonal warping. A similar effect is expected in all other transition-metal dichalcogenides. Our results pave the way for efficient harmonic generation based on layered materials for applications such as microscopy and imaging.Harmonic generation is a nonlinear optical process occurring in a variety of materials; the higher orders generation is generally less efficient than lower orders. Here, the authors report that the third-harmonic is thirty times stronger than the second-harmonic in monolayer MoS2.

| S-EPMC5715017 | biostudies-literature

Capping Layers to Improve the Electrical Stress Stability of MoS2 Transistors.

Project description:Two-dimensional (2D) materials offer exciting possibilities for numerous applications, including next-generation sensors and field-effect transistors (FETs). With their atomically thin form factor, it is evident that molecular activity at the interfaces of 2D materials can shape their electronic properties. Although much attention has focused on engineering the contact and dielectric interfaces in 2D material-based transistors to boost their drive current, less is understood about how to tune these interfaces to improve the long-term stability of devices. In this work, we evaluated molybdenum disulfide (MoS2) transistors under continuous electrical stress for periods lasting up to several days. During stress in ambient air, we observed temporary threshold voltage shifts that increased at higher gate voltages or longer stress durations, correlating to changes in interface trap states (ΔNit) of up to 1012 cm-2. By modifying the device to include either SU-8 or Al2O3 as an additional dielectric capping layer on top of the MoS2 channel, we were able to effectively reduce or even eliminate this unstable behavior. However, we found this encapsulating material must be selected carefully, as certain choices actually amplified instability or compromised device yield, as was the case for Al2O3, which reduced yield by 20% versus all other capping layers. Further refining these strategies to preserve stability in 2D devices will be crucial for their continued integration into future technologies.

| S-EPMC7895421 | biostudies-literature

Probing stacking configurations in a few layered MoS2 by low frequency Raman spectroscopy.

Project description:Novel two-dimensional (2D) layered materials, such as MoS2, have recently gained a significant traction, chiefly due to their tunable electronic and optical properties. A major attribute that affects the tunability is the number of layers in the system. Another important, but often overlooked aspect is the stacking configuration between the layers, which can modify their electro-optic properties through changes in internal symmetries and interlayer interactions. This demands a thorough understanding of interlayer stacking configurations of these materials before they can be used in devices. Here, we investigate the spatial distribution of various stacking configurations and variations in interlayer interactions in few-layered MoS2 flakes probed through the low-frequency Raman spectroscopy, which we establish as a versatile imaging tool for this purpose. Some interesting anomalies in MoS2 layer stacking, which we propose to be caused by defects, wrinkles or twist between the layers, are also reported here. These types of anomalies, which can severely affect the properties of these materials can be detected through low-frequency Raman imaging. Our findings provide useful insights for understanding various structure-dependent properties of 2D materials that could be of great importance for the development of future electro-optic devices, quantum devices and energy harvesting systems.

| S-EPMC7718217 | biostudies-literature

Epitaxial Growth of Nanostructured Li2 Se on Lithium Metal for All Solid-State Batteries.

Project description:Lithium is considered to be the ultimate anode material for high energy-density rechargeable batteries. Recent emerging technologies of all solid-state batteries based on sulfide-based electrolytes raise hope for the practical use of lithium, as it is likely to suppress lithium dendrite growth. However, such devices suffer from undesirable side reactions and a degradation of electrochemical performance. In this work, nanostructured Li2 Se epitaxially grown on Li metal by chemical vapor deposition are investigated as a protective layer. By adjusting reaction time and cooling rate, a morphology of as-prepared Li2 Se is controlled, resulting in nanoparticles, nanorods, or nanowalls with a dominant (220) plane parallel to the (110) plane of the Li metal substrate. Uniaxial pressing the layers under a pressure of 50 MPa for a cell preparation transforms more compact and denser. Dual compatibility of the Li2 Se layers with strong chemical bonds to Li metal and uniform physical contact to a Li6 PS5 Csulfide electrolyte prevents undesirable side reactions and enables a homogeneous charge transfer at the interface upon cycling. As a result, a full cell coupled with a LiCoO2 -based cathode shows significantly enhanced electrochemical performance and demonstrates the practical use of Li anodes with Li2 Se layers for all solid-state battery applications.

| S-EPMC8188223 | biostudies-literature

Strain-Modulated Photoelectric Responses from a Flexible α-In2Se3/3R MoS2 Heterojunction.

Project description:Semiconducting piezoelectric α-In2Se3 and 3R MoS2 have attracted tremendous attention due to their unique electronic properties. Artificial van der Waals (vdWs) heterostructures constructed with α-In2Se3 and 3R MoS2 flakes have shown promising applications in optoelectronics and photocatalysis. Here, we present the first flexible α-In2Se3/3R MoS2 vdWs p-n heterojunction devices for photodetection from the visible to near infrared region. These heterojunction devices exhibit an ultrahigh photoresponsivity of 2.9 × 103 A W-1 and a substantial specific detectivity of 6.2 × 1010 Jones under a compressive strain of - 0.26%. The photocurrent can be increased by 64% under a tensile strain of + 0.35%, due to the heterojunction energy band modulation by piezoelectric polarization charges at the heterojunction interface. This work demonstrates a feasible approach to enhancement of α-In2Se3/3R MoS2 photoelectric response through an appropriate mechanical stimulus.

| S-EPMC8128968 | biostudies-literature

Thermoelectric La-doped SrTiO3 epitaxial layers with single-crystal quality: from nano to micrometers.

Project description:High-quality thermoelectric La0.2Sr0.8TiO3 (LSTO) films, with thicknesses ranging from 20 nm to 0.7 ?m, have been epitaxially grown on SrTiO3(001) substrates by enhanced solid-source oxide molecular-beam epitaxy. All films are atomically flat (with rms roughness < 0.2 nm), with low mosaicity (<0.1°), and present very low electrical resistivity (<5 × 10-4 ? cm at room temperature), one order of magnitude lower than standard commercial Nb-doped SrTiO3 single-crystalline substrate. The conservation of transport properties within this thickness range has been confirmed by thermoelectric measurements where Seebeck coefficients of approximately -60 ?V/K have been recorded for all films. These LSTO films can be integrated on Si for non-volatile memory structures or opto-microelectronic devices, functioning as transparent conductors or thermoelectric elements.

| S-EPMC5507149 | biostudies-literature

Spatially Bandgap-Graded MoS2(1-x)Se2x Homojunctions for Self-Powered Visible-Near-Infrared Phototransistors.

Project description:Ternary transition metal dichalcogenide alloys with spatially graded bandgaps are an emerging class of two-dimensional materials with unique features, which opens up new potential for device applications. Here, visible-near-infrared and self-powered phototransistors based on spatially bandgap-graded MoS2(1-x)Se2x alloys, synthesized by a simple and controllable chemical solution deposition method, are reported. The graded bandgaps, arising from the spatial grading of Se composition and thickness within a single domain, are tuned from 1.83 to 1.73 eV, leading to the formation of a homojunction with a built-in electric field. Consequently, a strong and sensitive gate-modulated photovoltaic effect is demonstrated, enabling the homojunction phototransistors at zero bias to deliver a photoresponsivity of 311 mA W-1, a specific detectivity up to ~ 1011 Jones, and an on/off ratio up to ~ 104. Remarkably, when illuminated by the lights ranging from 405 to 808 nm, the biased devices yield a champion photoresponsivity of 191.5 A W-1, a specific detectivity up to ~ 1012 Jones, a photoconductive gain of 106-107, and a photoresponsive time in the order of ~ 50 ms. These results provide a simple and competitive solution to the bandgap engineering of two-dimensional materials for device applications without the need for p-n junctions.

| S-EPMC7770748 | biostudies-literature

Refractive indices of layers and optical simulations of Cu(In,Ga)Se2 solar cells.

Project description:Cu(In,Ga)Se2 based solar cells have reached efficiencies close to 23%. Further knowledge-driven improvements require accurate determination of the material properties. Here, we present refractive indices for all layers in Cu(In,Ga)Se2 solar cells with high efficiency. The optical bandgap of Cu(In,Ga)Se2 does not depend on the Cu content in the explored composition range, while the absorption coefficient value is primarily determined by the Cu content. An expression for the absorption spectrum is proposed, with Ga and Cu compositions as parameters. This set of parameters allows accurate device simulations to understand remaining absorption and carrier collection losses and develop strategies to improve performances.

| S-EPMC5954485 | biostudies-literature

Toward Large-Scale Ga2O3 Membranes via Quasi-Van Der Waals Epitaxy on Epitaxial Graphene Layers.

Project description:Epitaxial growth using graphene (GR), weakly bonded by van der Waals force, is a subject of interest for fabricating technologically important semiconductor membranes. Such membranes can potentially offer effective cooling and dimensional scale-down for high voltage power devices and deep ultraviolet optoelectronics at a fraction of the bulk-device cost. Here, we report on a large-area β-Ga2O3 nanomembrane spontaneous-exfoliation (1 cm × 1 cm) from layers of compressive-strained epitaxial graphene (EG) grown on SiC, and demonstrated high-responsivity flexible solar-blind photodetectors. The EG was favorably influenced by lattice arrangement of SiC, and thus enabled β-Ga2O3 direct-epitaxy on the EG. The β-Ga2O3 layer was spontaneously exfoliated at the interface of GR owing to its low interfacial toughness by controlling the energy release rate through electroplated Ni layers. The use of GR templates contributes to the seamless exfoliation of the nanomembranes, and the technique is relevant to eventual nanomembrane-based integrated device technology.

| S-EPMC8041250 | biostudies-literature