Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Bio-inspired interlocking random 3-D structures for tactile and thermal sensing.

ABSTRACT: Hierarchical nanostructures are tailored and used routinely in nature to accomplish tasks with high performance. Their formation in nature is accomplished without the use of any patterning process. Inspired by the performance of such structures, we have combined 2-D nanosheets with 1-D nanorods for functioning as electronic skin. These structures made in high density without any patterning process can be easily assembled over large areas. They can sense pressures as low as 0.4?Pa, with a response time in milliseconds. Further, these structures can also detect temperature changes with a non-linear response in the 298-400?K range, which is similar to skins perception of thermal stimuli. We illustrate this effect by showing that the device can differentiate between two 10?µl water droplets which are at room temperature and 323?K respectively.

SUBMITTER: Pu L

PROVIDER: S-EPMC5517528 | biostudies-literature | 2017 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Bio-inspired interlocking random 3-D structures for tactile and thermal sensing.

Pu Long L Saraf Rohit R Maheshwari Vivek V

Scientific reports 20170719 1

Hierarchical nanostructures are tailored and used routinely in nature to accomplish tasks with high performance. Their formation in nature is accomplished without the use of any patterning process. Inspired by the performance of such structures, we have combined 2-D nanosheets with 1-D nanorods for functioning as electronic skin. These structures made in high density without any patterning process can be easily assembled over large areas. They can sense pressures as low as 0.4 Pa, with a respons ...[more]

PMID: 28724983

Similar Datasets

Enhanced Mechanical Performance of Bio-Inspired Hybrid Structures Utilising Topological Interlocking Geometry.

Project description:Structural composites inspired by nacre have emerged as prime exemplars for guiding materials design of fracture-resistant, rigid hybrid materials. The intricate microstructure of nacre, which combines a hard majority phase with a small fraction of a soft phase, achieves superior mechanical properties compared to its constituents and has generated much interest. However, replicating the hierarchical microstructure of nacre is very challenging, not to mention improving it. In this article, we propose to alter the geometry of the hard building blocks by introducing the concept of topological interlocking. This design principle has previously been shown to provide an inherently brittle material with a remarkable flexural compliance. We now demonstrate that by combining the basic architecture of nacre with topological interlocking of discrete hard building blocks, hybrid materials of a new type can be produced. By adding a soft phase at the interfaces between topologically interlocked blocks in a single-build additive manufacturing process, further improvement of mechanical properties is achieved. The design of these fabricated hybrid structures has been guided by computational work elucidating the effect of various geometries. To our knowledge, this is the first reported study that combines the advantages of nacre-inspired structures with the benefits of topological interlocking.

| S-EPMC4877644 | biostudies-literature

Bio-Inspired Sutures: Simulating the Role of Suture Placement in the Mechanical Response of Interlocking Structures.

Project description:The hardest anatomical components of many animals are connected at thin seams known as sutures, which allow for growth and compliance required for respiration and movement and serve as a defense mechanism by absorbing energy during impacts. We take a bio-inspired approach and parameterize suture geometries to utilize geometric connections, rather than new engineering materials, to absorb high-impact loads. This study builds upon our work that investigated the effects of the dovetail suture contact angle, tangent length, and tab radius on the stiffness and toughness of an archway structure using finite element analysis. We explore how increasing the archway segmentation affects the mechanical response of the overall structure and investigate the effects of displacement when induced between sutures. First, when keeping displacement along a suture but increasing the number of archway pieces from two to four, we observed that stiffness and toughness were reduced substantially, although the overall trends stayed the same. Second, when the displacement was induced along an archway edge rather than upon a suture (in a three-piece archway), we observed that archway stiffness and toughness were much less sensitive to the changes in the suture parameters, but unlike the archway indented along the suture line, they tended to lose stiffness and toughness as the tangent length increased. This study is a step forward in the development of bio-inspired impact-resistant helmets.

| S-EPMC10669711 | biostudies-literature

A bio-inspired swellable microneedle adhesive for mechanical interlocking with tissue.

Project description:Achieving significant adhesion to soft tissues while minimizing tissue damage poses a considerable clinical challenge. Chemical-based adhesives require tissue-specific reactive chemistry, typically inducing a significant inflammatory response. Staples are fraught with limitations including high-localized tissue stress and increased risk of infection, and nerve and blood vessel damage. Here inspired by the endoparasite Pomphorhynchus laevis, which swells its proboscis to attach to its host's intestinal wall, we have developed a biphasic microneedle array that mechanically interlocks with tissue through swellable microneedle tips, achieving ~3.5-fold increase in adhesion strength compared with staples in skin graft fixation, and removal force of ~4.5 N cm(-2) from intestinal mucosal tissue. Comprising a poly(styrene)-block-poly(acrylic acid) swellable tip and non-swellable polystyrene core, conical microneedles penetrate tissue with minimal insertion force and depth, yet high adhesion strength in their swollen state. Uniquely, this design provides universal soft tissue adhesion with minimal damage, less traumatic removal, reduced risk of infection and delivery of bioactive therapeutics.

| S-EPMC3660066 | biostudies-literature

Tactile sensory coding and learning with bio-inspired optoelectronic spiking afferent nerves.

Project description:The integration and cooperation of mechanoreceptors, neurons and synapses in somatosensory systems enable humans to efficiently sense and process tactile information. Inspired by biological somatosensory systems, we report an optoelectronic spiking afferent nerve with neural coding, perceptual learning and memorizing capabilities to mimic tactile sensing and processing. Our system senses pressure by MXene-based sensors, converts pressure information to light pulses by coupling light-emitting diodes to analog-to-digital circuits, then integrates light pulses using a synaptic photomemristor. With neural coding, our spiking nerve is capable of not only detecting simultaneous pressure inputs, but also recognizing Morse code, braille, and object movement. Furthermore, with dimensionality-reduced feature extraction and learning, our system can recognize and memorize handwritten alphabets and words, providing a promising approach towards e-skin, neurorobotics and human-machine interaction technologies.

| S-EPMC7070032 | biostudies-literature

Sharpness recognition based on synergy between bio-inspired nociceptors and tactile mechanoreceptors.

Project description:Touch and pain sensations are complementary aspects of daily life that convey crucial information about the environment while also providing protection to our body. Technological advancements in prosthesis design and control mechanisms assist amputees to regain lost function but often they have no meaningful tactile feedback or perception. In the present study, we propose a bio-inspired tactile system with a population of 23 digital afferents: 12 RA-I, 6 SA-I, and 5 nociceptors. Indeed, the functional concept of the nociceptor is implemented on the FPGA for the first time. One of the main features of biological tactile afferents is that their distal axon branches in the skin, creating complex receptive fields. Given these physiological observations, the bio-inspired afferents are randomly connected to the several neighboring mechanoreceptors with different weights to form their own receptive field. To test the performance of the proposed neuromorphic chip in sharpness detection, a robotic system with three-degree of freedom equipped with the tactile sensor indents the 3D-printed objects. Spike responses of the biomimetic afferents are then collected for analysis by rate and temporal coding algorithms. In this way, the impact of the innervation mechanism and collaboration of afferents and nociceptors on sharpness recognition are investigated. Our findings suggest that the synergy between sensory afferents and nociceptors conveys more information about tactile stimuli which in turn leads to the robustness of the proposed neuromorphic system against damage to the taxels or afferents. Moreover, it is illustrated that spiking activity of the biomimetic nociceptors is amplified as the sharpness increases which can be considered as a feedback mechanism for prosthesis protection. This neuromorphic approach advances the development of prosthesis to include the sensory feedback and to distinguish innocuous (non-painful) and noxious (painful) stimuli.

| S-EPMC7822817 | biostudies-literature

Bio-Inspired Functional Surfaces Based on Laser-Induced Periodic Surface Structures.

Project description:Nature developed numerous solutions to solve various technical problems related to material surfaces by combining the physico-chemical properties of a material with periodically aligned micro/nanostructures in a sophisticated manner. The utilization of ultra-short pulsed lasers allows mimicking numerous of these features by generating laser-induced periodic surface structures (LIPSS). In this review paper, we describe the physical background of LIPSS generation as well as the physical principles of surface related phenomena like wettability, reflectivity, and friction. Then we introduce several biological examples including e.g., lotus leafs, springtails, dessert beetles, moth eyes, butterfly wings, weevils, sharks, pangolins, and snakes to illustrate how nature solves technical problems, and we give a comprehensive overview of recent achievements related to the utilization of LIPSS to generate superhydrophobic, anti-reflective, colored, and drag resistant surfaces. Finally, we conclude with some future developments and perspectives related to forthcoming applications of LIPSS-based surfaces.

| S-EPMC5456748 | biostudies-other

Villi Inspired Mechanical Interlocking for Intestinal Retentive Devices.

Project description:Intestinal retentive devices have applications ranging from sustained oral drug delivery systems to indwelling ingestible medical devices. Current strategies to retain devices in the small intestine primarily focus on chemical anchoring using mucoadhesives or mechanical coupling using expandable devices or structures that pierce the intestinal epithelium. Here, the feasibility of intestinal retention using devices containing villi-inspired structures that mechanically interlock with natural villi of the small intestine is evaluated. First the viability of mechanical interlocking as an intestinal retention strategy is estimated by estimating the resistance to peristaltic shear between simulated natural villi and devices with various micropost geometries and parameters. Simulations are validated in vitro by fabricating micropost array patches via multistep replica molding and performing lap-shear tests to evaluate the interlocking performance of the fabricated microposts with artificial villi. Finally, the optimal material and design parameters of the patches that can successfully achieve retention in vivo are predicted. This study represents a proof-of-concept for the viability of micropost-villi mechanical interlocking strategy to develop nonpenetrative multifunctional intestinal retentive devices for the future.

| S-EPMC10602537 | biostudies-literature

A chameleon-inspired stretchable electronic skin with interactive colour changing controlled by tactile sensing.

Project description:Some animals, such as the chameleon and cephalopod, have the remarkable capability to change their skin colour. This unique characteristic has long inspired scientists to develop materials and devices to mimic such a function. However, it requires the complex integration of stretchability, colour-changing and tactile sensing. Here we show an all-solution processed chameleon-inspired stretchable electronic skin (e-skin), in which the e-skin colour can easily be controlled through varying the applied pressure along with the applied pressure duration. As such, the e-skin's colour change can also be in turn utilized to distinguish the pressure applied. The integration of the stretchable, highly tunable resistive pressure sensor and the fully stretchable organic electrochromic device enables the demonstration of a stretchable electrochromically active e-skin with tactile-sensing control. This system will have wide range applications such as interactive wearable devices, artificial prosthetics and smart robots.

| S-EPMC4560774 | biostudies-literature

Transient bio-inspired gliders with embodied humidity responsive actuators for environmental sensing.

Project description:Collecting temporal and spatial high-resolution environmental data can guide studies in environmental sciences to gain insights in ecological processes. The utilization of automated robotic systems to collect these types of data can maximize accuracy, resilience, and deployment rate. Furthermore, it reduces the risk to researchers deploying sensors in inaccessible environments and can significantly increase the cost-effectiveness of such studies. The introduction of transient robotic systems featuring embodied environmental sensors pushes towards building a digital ecology, while introducing only minimal disturbance to the environment. Transient robots made from fully biodegradable and non-fossil based materials, do not develop into hazardous e-waste at the end of their lifetime and can thus enable a broader adoption for environmental sensing in the real world. In this work, our approach towards the design of transient robots includes the integration of humidity-responsive materials in a glider, which is inspired by the Alsomitra macrocarpa seed. The design space of these gliders is explored and their behavior studied numerically, which allows us to make predictions on their flight characteristics. Results are validated against experiments, which show two different gliding behaviors, that can help improve the spread of the sensors. By tailoring the Cellulose-Gelatin composition of the humidity actuator, self-folding systems for selective rainwater exposure can be designed. The pH sensing layer, protected by the actuator, provides visual feedback on the pH of the rainwater. The presented methods can guide further concepts developing transient aerial robotic systems for sustainable, environmental monitoring.

| S-EPMC9659746 | biostudies-literature

A simulation framework for bio-inspired sonar sensing with Unmanned Aerial Vehicles.

Project description:We introduce a unified simulation framework that generates natural sensing environments and produces biosonar echoes under various sensing scenarios. This framework produces rich sensory data with environmental information completely known, thus can be used for the training of robotic algorithms for biosonar-based Unmanned Aerial Vehicles. The simulated environment consists of random trees with full geometry of the tree foliage. To simulate a single tree, we adopt the Lindenmayer system to generate the initial branching pattern and integrate that with the available measurements of the 3D computer-aided design object files to create natural-looking branches, sub-branches, and leaves. A forest is formed by simulating trees at random locations generated by using an inhomogeneous Poisson process. While our simulated environments can be generally used for testing other sensors and training robotic algorithms, in this study we focus on testing bat-inspired Unmanned Aerial Vehicles that recreate bat's flying behavior through biosonar sensors. To this end, we also introduce an foliage echo simulator that produces biosonar echoes while mimicking bat's biosonar system. We demonstrate the application of the proposed simulation framework by generating real-world scenarios with multiple trees and computing the resulting impulse responses under static or dynamic motions of an Unmanned Aerial Vehicle.

| S-EPMC7608878 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data