Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Electrical circuit model of ITO/AZO/Ge photodetector.

ABSTRACT: In this data article, ITO/AZO/Ge photodetector was investigated for electrical circuit model. Due to the double (ITO and AZO) transparent metal-oxide films (DOI:10.1016/j.mssp.2016.03.007) (Yun et al., 2016) [1], the Ge heterojunction device has a better interface quality due to the AZO layer with a low electrical resistance due to the ITO layer (Yun et al., 2015) [2]. The electrical and interfacial benefitted ITO/AZO/Ge heterojunction shows the quality Schottky junction. In order to investigate the device, the ITO/AZO/Ge heterojunction was analyzed by R-C circuit model using the impedance spectroscopy.

SUBMITTER: Patel M

PROVIDER: S-EPMC5526516 | biostudies-literature | 2017 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Electrical circuit model of ITO/AZO/Ge photodetector.

Patel Malkeshkumar M Kim Joondong J

Data in brief 20170714

In this data article, ITO/AZO/Ge photodetector was investigated for electrical circuit model. Due to the double (ITO and AZO) transparent metal-oxide films (DOI:10.1016/j.mssp.2016.03.007) (Yun et al., 2016) [1], the Ge heterojunction device has a better interface quality due to the AZO layer with a low electrical resistance due to the ITO layer (Yun et al., 2015) [2]. The electrical and interfacial benefitted ITO/AZO/Ge heterojunction shows the quality Schottky junction. In order to investigate ...[more]

PMID: 28765832

Similar Datasets

Near infrared photothermoelectric effect in transparent AZO/ITO/Ag/ITO thin films.

Project description:A new concept of oxide-metal-oxide structures that combine photothermoelectric effect with high reflectance (~ 80%) at wavelengths in the infrared (> 1100 nm) and high transmittance in the visible range is reported here. This was observed in optimized ITO/Ag/ITO structure, 20 nm of Silver (Ag) and 40 nm of Indium Tin Oxide (ITO), deposited on Aluminum doped Zinc Oxide (AZO) thin film. These layers show high energy saving efficiency by keeping the temperature constant inside a glazed compartment under solar radiation, but additionally they also show a photothermoelectric effect. Under uniform heating of the sample a thermoelectric effect is observed (S = 40 mV/K), but when irradiated, a potential proportional to the intensity of the radiation is also observed. Therefore, in addition to thermal control in windows, these low emission coatings can be applied as transparent photothermoelectric devices.

| S-EPMC8692428 | biostudies-literature

Structural optical and electrical properties of a transparent conductive ITO/Al-Ag/ITO multilayer contact.

Project description:Indium tin oxide (ITO) is a widely used material for transparent conductive oxide (TCO) films due to its good optical and electrical properties. Improving the optoelectronic properties of ITO films with reduced thickness is crucial and quite challenging. ITO-based multilayer films with an aluminium-silver (Al-Ag) interlayer (ITO/Al-Ag/ITO) and a pure ITO layer (as reference) were prepared by RF and DC sputtering. The microstructural, optical and electrical properties of the ITO/Al-Ag/ITO (IAAI) films were investigated before and after annealing at 400 °C. X-ray diffraction measurements show that the insertion of the Al-Ag intermediate bilayer led to the crystallization of an Ag interlayer even at the as-deposited stage. Peaks attributed to ITO(222), Ag(111) and Al(200) were observed after annealing, indicating an enhancement in crystallinity of the multilayer films. The annealed IAAI film exhibited a remarkable improvement in optical transmittance (86.1%) with a very low sheet resistance of 2.93 ?/sq. The carrier concentration increased more than twice when the Al-Ag layer was inserted between the ITO layers. The figure of merit of the IAAI multilayer contact has been found to be high at 76.4 × 10-3 ?-1 compared to a pure ITO contact (69.4 × 10-3 ?-1). These highly conductive and transparent ITO films with Al-Ag interlayer can be a promising contact for low-resistance optoelectronics devices.

| S-EPMC7214864 | biostudies-literature

High-Performance Waveguide-Integrated Ge/Si Avalanche Photodetector with Lateral Multiplication Region.

Project description:High-performance waveguide-integrated Ge/Si APDs in separate absorption, charge, and multiplication (SACM) schemes have been exploited to facilitate energy-efficient optical communication and interconnects. However, the charge layer design is complex and time-consuming. A waveguide-integrated Ge/Si avalanche photodetector (APD) is proposed in a separate absorption and multiplication (SAM) configuration. The device can work at low voltage and high speed with a lateral multiplication region without complexity of the charge layer. The proposed device is implemented by the complementary metal-oxide-semiconductor (CMOS) process in the 8-inch Si photonics platform. The device has a low breakdown voltage of 12 V and shows high responsivity of 15.1 A/W at 1550 nm wavelength under optical power of -22.49 dBm, corresponding to a multiplication gain of 18.1. Moreover, an opto-electrical bandwidth of 20.7 GHz is measured at 10.6 V. The high-speed performance at low voltage shows a great potential to implement high-energy-efficient Si optical communications and interconnections.

| S-EPMC9145896 | biostudies-literature

Influence of the Sputtering Temperature on Reflectivity and Electrical Properties of ITO/AgIn/ITO Composite Films for High-Reflectivity Anodes.

Project description:In this paper, indium tin oxide/silver indium/indium tin oxide (ITO/AgIn/ITO) composite films were deposited on glass substrates by magnetron sputtering. The effects of the sputtering temperature on the optical and electrical properties of the composite films were systematically investigated. The ITO/AgIn/ITO composite films deposited at sputtering temperatures of 25 °C and 100 °C demonstrated a high reflectivity of 95.3% at 550 nm and a resistivity of about 6.8-7.3 μΩ·cm. As the sputtering temperature increased, the reflectivity decreased and the resistivity increased slightly. The close connection between microstructure and surface morphology and the optical and electrical properties of the composite films was further illustrated by scanning electron microscopy imaging and atomic force microscopy imaging. It is shown that the ITO/AgIn/ITO thin films have a promising application for high-reflectivity anodes.

| S-EPMC10095718 | biostudies-literature

Crystallization and Electrical Properties of Ge-Rich GeSbTe Alloys.

Project description:Enrichment of GeSbTe alloys with germanium has been proposed as a valid approach to increase the crystallization temperature and therefore to address high-temperature applications of non-volatile phase change memories, such as embedded or automotive applications. However, the tendency of Ge-rich GeSbTe alloys to decompose with the segregation of pure Ge still calls for investigations on the basic mechanisms leading to element diffusion and compositional variations. With the purpose of identifying some possible routes to limit the Ge segregation, in this study, we investigate Ge-rich Sb2Te3 and Ge-rich Ge2Sb2Te5 with low (<40 at %) or high (>40 at %) amounts of Ge. The formation of the crystalline phases has been followed as a function of annealing temperature by X-ray diffraction. The temperature dependence of electrical properties has been evaluated by in situ resistance measurements upon annealing up to 300 °C. The segregation and decomposition processes have been studied by scanning transmission electron microscopy (STEM) and discussed on the basis of density functional theory calculations. Among the studied compositions, Ge-rich Ge2Sb2Te5 is found to be less prone to decompose with Ge segregation.

| S-EPMC8876497 | biostudies-literature

Optical, electrical and photoresponse data of flexible and high-performing NiO/ZnO ultraviolet photodetector.

Project description:In this work, the fabrication process flow of ZnO/NiO heterojunction device on a PET substrate, optical properties, physical properties and photoresponses presented (Patel and Kim, 2017) [1]. Absorption coefficient and Tauc plots of ZnO and NiO samples are summarized. Digital photograph of flexible NiO/ZnO/ITO device on a PET substrate is presented. Surface morphologies of ITO on PET, polycrystalline ZnO on ITO/PET, and nanocrystalline NiO on ZnO/ITO/PET is presented with a demonstration of scissor-cut design. NiO/ZnO/ITO/PET photoelectric device has advantages of large-scale production and light-weight. Transmittance, reflectance and absorbance dataset of the native PET substrate (100 μm thick) is summarized. Photoresponses of the transparent (NiO/ZnO/ITO/PET) device with bias modulations including the rising edge and falling edge are included in this article.

| S-EPMC5988381 | biostudies-literature

Novel technique for ultrasound-guided needle tracking: An inexpensive reusable phantom model utilising a closed electrical circuit.

Project description:PurposePurpose:There are a variety of commercially made ultrasound training phantoms available for educational purposes. A new concept in phantoms is presented that utilises a low-cost method to create a reusable phantom.MethodsA closed electric circuit was combined with insulating material to create a novel phantom that can be used to practise needle tracking under ultrasound guidance on repeated occasions. A tricolour light-emitting diode (LED) illuminates when the needle (under ultrasound gudiance) contacts one of three metal objects embedded in the phatom material.ConclusionThis prototype model provides a simple solution for trianing ultrasound needle guidance is particularly geared towards programmes with a high volume of users. This protoype provides a starting point for a new concept in educational phantom trainers.

| S-EPMC11109995 | biostudies-literature

Microstructure and Electrical Properties of AZO/Graphene Nanosheets Fabricated by Spark Plasma Sintering.

Project description:In this study we report on the sintering behavior, microstructure and electrical properties of Al-doped ZnO ceramics containing 0-0.2 wt. % graphene sheets (AZO-GNSs) and processed using spark plasma sintering (SPS). Our results show that the addition of <0.25 wt. % GNSs enhances both the relative density and the electrical resistivity of AZO ceramics. In terms of the microstructure, the GNSs are distributed at grain boundaries. In addition, the GNSs are also present between ZnO and secondary phases (e.g., ZnAl₂O₄) and likely contribute to the measured enhancement of Hall mobility (up to 105.1 cm²·V-1·s-1) in these AZO ceramics. The minimum resistivity of the AZO-GNS composite ceramics is 3.1 × 10-4 Ω·cm which compares favorably to the value of AZO ceramics which typically have a resistivity of 1.7 × 10-3 Ω·cm.

| S-EPMC5509084 | biostudies-other

Opto-electrical evaluation of visible blind fast-response nanostructured SnO<sub>2</sub>/Si photodetector.

Project description:In this study, a nanostructured tin(iv) oxide (SnO2)/Si heterojunction UV photodetector was fabricated in response to laser pulses attained via pulsed laser deposition (PLD). In particular, the photo-detection mechanisms of the proposed devices were thoroughly investigated considering multiple-profile dependency, namely, laser pulses, spectral response, and incident power. In detail, particle diameters of 25 and 41 nm with a bandgap alteration of 0.2 eV and a cut-off phenomenon at around 335 nm occurred as a result of an increase in the number of pulses from 300 to 700. The optimum photodetector (at 700 pulses, λ 340 nm, and 10 mW cm-2) revealed a responsivity (R λ ) and external quantum efficiency (EQE) of 32.9 mA W-1 and 120.2, respectively. Furthermore, a descended photocurrent behavior from 330 to 63.9 (μA) was observed at wavelengths of 340 and 625 nm with a visible light rejection ratio of 516%, indicating the visible blind characteristic of the proposed geometry. This was also observed at an extremely low bias potential (0.01 V). The incident power profile demonstrated an inversely proportional correlation to R λ and EQE, with values 37.8 mA W-1 and 137.7 at 6 mW cm-2, respectively. Of the fabricated devices, the photodetector performance attained at 700 pulses, λ 340 nm, and 10 mW cm-2 depicted a substantially rapid time-resolved characteristic with a rise and fall time of 0.29 and 0.31 s, respectively.

| S-EPMC11367619 | biostudies-literature

Non-Hermitian Skin Effect in a Non-Hermitian Electrical Circuit.

Project description:The conventional bulk-boundary correspondence directly connects the number of topological edge states in a finite system with the topological invariant in the bulk band structure with periodic boundary condition (PBC). However, recent studies show that this principle fails in certain non-Hermitian systems with broken reciprocity, which stems from the non-Hermitian skin effect (NHSE) in the finite system where most of the eigenstates decay exponentially from the system boundary. In this work, we experimentally demonstrate a 1D non-Hermitian topological circuit with broken reciprocity by utilizing the unidirectional coupling feature of the voltage follower module. The topological edge state is observed at the boundary of an open circuit through an impedance spectra measurement between adjacent circuit nodes. We confirm the inapplicability of the conventional bulk-boundary correspondence by comparing the circuit Laplacian between the periodic boundary condition (PBC) and open boundary condition (OBC). Instead, a recently proposed non-Bloch bulk-boundary condition based on a non-Bloch winding number faithfully predicts the number of topological edge states.

| S-EPMC7989004 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data