Dataset Information

Feasibility of rigid 3D image registration of high-resolution peripheral quantitative computed tomography images of healing distal radius fractures.

ABSTRACT: For accurate analysis of bone formation and resorption during fracture healing, correct registration of follow-up onto baseline image is required. A per-fragment approach could improve alignment compared to standard registration based on the whole fractured region. In this exploratory study, we tested the effect of fragment size and displacement on a per-fragment registration, and compared the results of this per-fragment registration to the results of the standard registration in two stable fractures and one unstable fracture. To test the effect of fragment size and displacement, high-resolution peripheral quantitative computed tomography (HR-pQCT) scans of three unfractured radii were divided into subvolumes. Different displacements in x-, y, or z-direction or rotations around each axis were applied, and each subvolume was registered onto the initial volume to realign it. Next, registration of follow-up onto baseline scan was performed in two stable and one unstable fracture. After coarsely aligning the follow-up onto the baseline scan, a more accurate registration was performed of the whole fracture, i.e. the standard registration, and of each fracture fragment separately, i.e. per-fragment registration. Alignment was checked using overlay images showing baseline, follow-up and overlap between these scans, and by comparing correlation coefficients between the standard and per-fragment registration. Generally, subvolumes as small as 300 mm3 that were displaced up to 0.82 mm in x- or y-, or up to 1.64 mm in z-direction could be realigned correctly. For the fragments of all fractures, correlation coefficients were higher after per-fragment registration compared to standard registration. Most improvement was found in the unstable fracture and one fragment of the unstable fracture did not align correctly. This exploratory study showed that image registration of individual subvolumes, such as fracture fragments, is feasible in both stable and unstable fractures, and leads to better alignment of these fragments compared to an approach that is based on registration using the whole fractured region. This result is promising for additional analysis of bone formation and resorption in HR-pQCT studies on fracture healing.

SUBMITTER: de Jong JJA

PROVIDER: S-EPMC5526550 | biostudies-literature | 2017

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Feasibility of rigid 3D image registration of high-resolution peripheral quantitative computed tomography images of healing distal radius fractures.

de Jong Joost J A JJA Christen Patrik P Plett Ryan M RM Chapurlat Roland R Geusens Piet P PP van den Bergh Joop P W JPW Müller Ralph R van Rietbergen Bert B

PloS one 20170725 7

For accurate analysis of bone formation and resorption during fracture healing, correct registration of follow-up onto baseline image is required. A per-fragment approach could improve alignment compared to standard registration based on the whole fractured region. In this exploratory study, we tested the effect of fragment size and displacement on a per-fragment registration, and compared the results of this per-fragment registration to the results of the standard registration in two stable fra ...[more]

PMID: 28742828

Similar Datasets

Project description:The development of synthetic computed tomography (CT) (synCT) derived from magnetic resonance (MR) images supports MR-only treatment planning. We evaluated the accuracy of synCT and synCT-generated digitally reconstructed radiographs (DRRs) relative to CT and determined their performance for image guided radiation therapy (IGRT).Magnetic resonance simulation (MR-SIM) and CT simulation (CT-SIM) images were acquired of an anthropomorphic skull phantom and 12 patient brain cancer cases. SynCTs were generated using fluid attenuation inversion recovery, ultrashort echo time, and Dixon data sets through a voxel-based weighted summation of 5 tissue classifications. The DRRs were generated from the phantom synCT, and geometric fidelity was assessed relative to CT-generated DRRs through bounding box and landmark analysis. An offline retrospective analysis was conducted to register cone beam CTs (n=34) to synCTs and CTs using automated rigid registration in the treatment planning system. Planar MV and KV images (n=37) were rigidly registered to synCT and CT DRRs using an in-house script. Planar and volumetric registration reproducibility was assessed and margin differences were characterized by the van Herk formalism.Bounding box and landmark analysis of phantom synCT DRRs were within 1 mm of CT DRRs. Absolute planar registration shift differences ranged from 0.0 to 0.7 mm for phantom DRRs on all treatment platforms and from 0.0 to 0.4 mm for volumetric registrations. For patient planar registrations, the mean shift differences were 0.4 ± 0.5 mm (range, -0.6 to 1.6 mm), 0.0 ± 0.5 mm (range, -0.9 to 1.2 mm), and 0.1 ± 0.3 mm (range, -0.7 to 0.6 mm) for the superior-inferior (S-I), left-right (L-R), and anterior-posterior (A-P) axes, respectively. The mean shift differences in volumetric registrations were 0.6 ± 0.4 mm (range, -0.2 to 1.6 mm), 0.2 ± 0.4 mm (range, -0.3 to 1.2 mm), and 0.2 ± 0.3 mm (range, -0.2 to 1.2 mm) for the S-I, L-R, and A-P axes, respectively. The CT-SIM and synCT derived margins were <0.3 mm different.DRRs generated by synCT were in close agreement with CT-SIM. Planar and volumetric image registrations to synCT-derived targets were comparable with CT for phantom and patients. This validation is the next step toward MR-only planning for the brain.

Project description:BACKGROUND:Recently, computerized virtual surgery planning has been increasingly applied in various orthopedic procedures. In this study, we developed an image fusion system for 3D preoperative planning and fluoroscopy for the osteosynthesis. To assess the utility of image fusion system, we evaluated the reproducibility of preoperative planning in the osteosynthesis of distal radius fractures with using the image fusion system, and compared with the reproducibility of the patients without using the image fusion system. METHODS:Forty-two wrists of 42 distal radius fracture patients who underwent osteosynthesis using volar locking plates were evaluated. The patients were divided into two groups. Image fusion group utilized three-dimensional (3D) preoperative planning and image fusion system. Control group utilized only 3D preoperative planning. In both groups, 3D preoperative planning was performed in order to determine reduction, placement, and choice of implants. In the image fusion group, the outline of planned image was displayed on a monitor overlapping with fluoroscopy images during surgery. Reductions were evaluated by volar tilt and radial inclination of 3D images. Plate positions were evaluated with distance to joint surface, plate center axis position, and inclination relative to the radius axis. Screw choices were recorded for the plan and actual choices for each screw hole. Differences in the parameters between pre- and postoperative images were evaluated. Differences in reduction shape, plate positions, and screw choices were compared between groups. RESULTS:The differences in the distance from plate to joint surface were significantly smaller in the image fusion group compared to the control group (P?<?0.01). The differences in the distal screw choices were significantly smaller in the image fusion group compared to the control group (P?<?0.01). CONCLUSIONS:The image fusion system was useful to reproduce the planned plate position and distal screw choices in the osteosynthesis of distal radius fractures. TRIAL REGISTRATION:ClinicalTrials.gov, NCT03764501.

Dataset Information

Feasibility of rigid 3D image registration of high-resolution peripheral quantitative computed tomography images of healing distal radius fractures.

Publications

Feasibility of rigid 3D image registration of high-resolution peripheral quantitative computed tomography images of healing distal radius fractures.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets