Multiplexed Point-of-Care Testing - xPOCT.
Ontology highlight
ABSTRACT:
SUBMITTER: Dincer C
PROVIDER: S-EPMC5538621 | biostudies-literature | 2017 Aug
REPOSITORIES: biostudies-literature
Publications
Multiplexed Point-of-Care Testing - xPOCT.
Dincer Can C Bruch Richard R Kling André A Dittrich Petra S PS Urban Gerald A GA
Trends in biotechnology 20170426 8
Multiplexed point-of-care testing (xPOCT), which is simultaneous on-site detection of different analytes from a single specimen, has recently gained increasing importance for clinical diagnostics, with emerging applications in resource-limited settings (such as in the developing world, in doctors' offices, or directly at home). Nevertheless, only single-analyte approaches are typically considered as the major paradigm in many reviews of point-of-care testing. Here, we comprehensively review the ...[more]
Similar Datasets
Project description:In developed nations, monitoring for drug-induced liver injury through serial measurements of serum transaminases [aspartate aminotransferase (AST) and alanine aminotransferase (ALT)] in at-risk individuals is the standard of care. Despite the need, monitoring for drug-related hepatotoxicity in resource-limited settings is often limited by expense and logistics, even for patients at highest risk. This article describes the development and clinical testing of a paper-based, multiplexed microfluidic assay designed for rapid, semiquantitative measurement of AST and ALT in a fingerstick specimen. Using 223 clinical specimens obtained by venipuncture and 10 fingerstick specimens from healthy volunteers, we have shown that our assay can, in 15 min, provide visual measurements of AST and ALT in whole blood or serum, which allow the user to place those values into one of three readout "bins" [<3× upper limit of normal (ULN), 3 to 5× ULN, and >5× ULN, corresponding to tuberculosis/HIV treatment guidelines] with >90% accuracy. These data suggest that the ultimate point-of-care fingerstick device will have high impact on patient care in low-resource settings.
| S-EPMC3624093 | biostudies-literature
Project description:The impact of the COVID-19 pandemic has reinforced the need for rapid, cost-effective, and reliable point-of-care testing (POCT) devices for massive population screening. The co-circulation of SARS-CoV-2 with several seasonal respiratory viruses highlights the need for multiplexed biosensing approaches. Herein, we present a fast and robust all-in-one POCT device for parallel viral antigen and serological analysis. The biosensing approach consists of a functionalized polycarbonate disc-shaped surface with microfluidic structures, where specific bioreagents are immobilized in microarray format, and a portable optoelectronic analyzer. The biosensor quantifies the concentration of viral antigens and specific immunoglobulins G and M for SARS-CoV-2, influenza A/B, adenovirus, and respiratory syncytial virus, using 30 μL of a sample. The semi-automated analysis of 6 samples is performed in 30 min. Validation studies performed with 135 serum samples and 147 nasopharyngeal specimens reveal high diagnostic sensitivity (98-100%) and specificity (84-98%), achieving an excellent agreement (κ = 0.937) with commercial immunoassays, which complies with the World Health Organization criteria for POC COVID-19 diagnostic tests. The versatility of the POCT device paves the way for the detection of other pathogens and analytes in the incoming post-pandemic world, integrating specific bioreagents against different variants of concerns and interests.
| S-EPMC9176175 | biostudies-literature
Project description:Microfluidics have become an enabling technology for point-of-care and personalized diagnostics. Desirable capabilities of microfluidics-based diagnostic devices include simplicity, portability, low cost and the performance of multiplexed and quantitative measurements, ideally in a high-throughput format. Here we present the multiplexed volumetric bar-chart chip (V-Chip), which integrates all these capabilities in one device. A key feature of the V-Chip is that quantitative results are displayed as bar charts directly on the device-without the need for optical instruments or any data processing or plotting steps. This is achieved by directly linking oxygen production by catalase, which is proportional to the concentration of the analyte, with the displacement of ink along channels on the device. We demonstrate the rapid quantification of protein biomarkers in diverse clinical samples with the V-Chip. The development of the V-Chip thus opens up the possibility of greatly simplified point-of-care and personalized diagnostics.
| S-EPMC4266136 | biostudies-literature
Project description:We present a deep learning-based framework to design and quantify point-of-care sensors. As a use-case, we demonstrated a low-cost and rapid paper-based vertical flow assay (VFA) for high sensitivity C-Reactive Protein (hsCRP) testing, commonly used for assessing risk of cardio-vascular disease (CVD). A machine learning-based framework was developed to (1) determine an optimal configuration of immunoreaction spots and conditions, spatially-multiplexed on a sensing membrane, and (2) to accurately infer target analyte concentration. Using a custom-designed handheld VFA reader, a clinical study with 85 human samples showed a competitive coefficient-of-variation of 11.2% and linearity of R 2?=?0.95 among blindly-tested VFAs in the hsCRP range (i.e., 0-10?mg/L). We also demonstrated a mitigation of the hook-effect due to the multiplexed immunoreactions on the sensing membrane. This paper-based computational VFA could expand access to CVD testing, and the presented framework can be broadly used to design cost-effective and mobile point-of-care sensors.
| S-EPMC7206101 | biostudies-literature
Project description:Background. In response to demand for fast and efficient clinical testing, the use of point-of-care testing (POCT) has become increasingly common in the United States. However, studies of POCT implementation have found that adopting POCT may not always be advantageous relative to centralized laboratory testing. Methods. We construct a simulation model of patient flow in an outpatient care setting to evaluate tradeoffs involved in POCT implementation across multiple dimensions, comparing measures of patient outcomes in varying clinical scenarios, testing regimes, and patient conditions. Results. We find that POCT can significantly reduce clinical time for patients, as compared to traditional testing regimes, in settings where clinic and central testing areas are far apart. However, as distance from clinic to central testing area decreased, POCT advantage over central laboratory testing also decreased, in terms of time in the clinical system and estimated subsequent productivity loss. For example, testing for pneumonia resulted in an estimated average of 27.80 (central lab) versus 15.50 (POCT) total lost productive hours in a rural scenario, and an average of 14.92 (central lab) versus 15.50 (POCT) hours in a hospital-based scenario. Conclusions. Our results show that POCT can effectively reduce the average time a patient spends in the system for varying condition profiles and clinical scenarios. However, the number of total lost productive hours, a more holistic measure, is greatly affected by testing quality, where POCT often is at a disadvantage. Thus, it is important to consider factors such as clinical setting, target condition, testing costs, and test quality when selecting appropriate testing regime.
| S-EPMC6589980 | biostudies-literature
Project description:The implementation of endotype-driven effective intervention strategies is now considered as an essential component for sepsis management. Rapid screening and frequent monitoring of immune responses are critical for evidence-based informed decisions in the early hours of patient arrival. Current technologies focus on pathogen identification that lack rapid testing of the patient immune response, impeding clinicians from providing appropriate sepsis treatment. Herein, we demonstrate a first-of-its-kind novel point-of-care device that uses a unique approach by directly monitoring a panel of five cytokine biomarkers (IL-6, IL-8, IL-10, TRAIL & IP-10), that is attributed as a sign of the body's host immune response to sepsis. The developed point-of-care device encompasses a disposable sensor cartridge attached to an electrochemical reader. High sensitivity is achieved owing to the unique sensor design with an array of nanofilm semiconducting/metal electrode interface, functionalized with specific capture probes to measure target biomarkers simultaneously using non-faradaic electrochemical impedance spectroscopy. The sensor has a detection limit of ~1 pg/mL and provides results in less than five minutes from a single drop of undiluted plasma sample. Furthermore, the sensor demonstrates an excellent correlation (Pearson's r > 0.90) with the reference method for a total n = 40 clinical samples, and the sensor's performance is ~30 times faster compared to the standard reference technique. We have demonstrated the sensor's effectiveness to enhance diagnosis with a mechanistic biomarker-guided approach that can help disease endotypying for effective clinical management of sepsis at the patient bedside.
| S-EPMC7569407 | biostudies-literature
Project description:Single multiplexed assays could replace the standard 2-tiered (STT) algorithm recommended for the laboratory diagnosis of Lyme disease if they perform with a specificity and a sensitivity superior or equal to those of the STT algorithm. We used human serum rigorously characterized to be sera from patients with acute- and convalescent-phase early Lyme disease, Lyme arthritis, and posttreatment Lyme disease syndrome, as well as the necessary controls (n?=?241 samples), to select the best of 12 Borrelia burgdorferi proteins to improve our microfluidic assay (mChip-Ld). We then evaluated its serodiagnostic performance in comparison to that of a first-tier enzyme immunoassay and the STT algorithm. We observed that more antigens became positive as Lyme disease progressed from early to late stages. We selected three antigens (3Ag) to include in the mChip-Ld: VlsE and a proprietary synthetic 33-mer peptide (PepVF) to capture sensitivity in all disease stages and OspC for early Lyme disease. With the specificity set at 95%, the sensitivity of the mChip-Ld with 3Ag ranged from 80% (95% confidence interval [CI], 56% to 94%) and 85% (95% CI, 74% to 96%) for two panels of serum from patients with early Lyme disease and was 100% (95% CI, 83% to 100%) for serum from patients with Lyme arthritis; the STT algorithm detected early Lyme disease in the same two panels of serum from patients with early Lyme disease with a sensitivity of 48.5% and 75% and Lyme arthritis in serum from patients with Lyme arthritis with a sensitivity of 100%, and the specificity was 97.5% to 100%. The mChip-Ld platform outperformed the STT algorithm according to sensitivity. These results open the door for the development of a single, rapid, multiplexed diagnostic test for point-of-care use that can be designed to identify the Lyme disease stage.
| S-EPMC6879297 | biostudies-literature
Project description:We demonstrate an integrated platform that merges a microfluidic chip with lensless imaging to target CD4(+) T-lymphocyte counts for HIV point-of-care testing at resource-limited settings. The chips were designed and fabricated simply with a laser cutter without using expensive cleanroom equipment. To capture CD4(+) T-lymphocytes from blood, anti-CD4 antibody was immobilized on only one side of the microfluidic chip. These captured cells were detected through an optically clear chip using a charge coupled device (CCD) sensor by lensless shadow imaging techniques. Gray scale image of the captured cells in a 24 mm x 4 mm x 50 microm microfluidic chip was obtained by the lensless imaging platform. The automatic cell counting software enumerated the captured cells in 3s. Captured cells were also imaged with a fluorescence microscope and manually counted to characterize functionality of the integrated platform. The integrated platform achieved 70.2+/-6.5% capture efficiency, 88.8+/-5.4% capture specificity for CD4(+) T-lymphocytes, 96+/-1.6% CCD efficiency, and 83.5+/-2.4% overall platform performance (n=9 devices) compared to the gold standard, i.e. flow cytometry count. The integrated system gives a CD4 count from blood within 10 min. The integrated platform points a promising direction for point-of-care testing (POCT) to rapidly capture, image and count subpopulations of cells from blood samples in an automated matter.
| S-EPMC2733855 | biostudies-literature
Project description:Nearly 7% of the world's population live with a hemoglobin variant. Hemoglobins S, C, and E are the most common and significant hemoglobin variants worldwide. Sickle cell disease, caused by hemoglobin S, is highly prevalent in sub-Saharan Africa and in tribal populations of Central India. Hemoglobin C is common in West Africa, and hemoglobin E is common in Southeast Asia. Screening for significant hemoglobin disorders is not currently feasible in many low-income countries with the high disease burden. Lack of early diagnosis leads to preventable high morbidity and mortality in children born with hemoglobin variants in low-resource settings. Here, we describe HemeChip, the first miniaturized, paper-based, microchip electrophoresis platform for identifying the most common hemoglobin variants easily and affordably at the point-of-care in low-resource settings. HemeChip test works with a drop of blood. HemeChip system guides the user step-by-step through the test procedure with animated on-screen instructions. Hemoglobin identification and quantification is automatically performed, and hemoglobin types and percentages are displayed in an easily understandable, objective way. We show the feasibility and high accuracy of HemeChip via testing 768 subjects by clinical sites in the United States, Central India, sub-Saharan Africa, and Southeast Asia. Validation studies include hemoglobin E testing in Bangkok, Thailand, and hemoglobin S testing in Chhattisgarh, India, and in Kano, Nigeria, where the sickle cell disease burden is the highest in the world. Tests were performed by local users, including healthcare workers and clinical laboratory personnel. Study design, methods, and results are presented according to the Standards for Reporting Diagnostic Accuracy (STARD). HemeChip correctly identified all subjects with hemoglobin S, C, and E variants with 100% sensitivity, and displayed an overall diagnostic accuracy of 98.4% in comparison to reference standard methods. HemeChip is a versatile, mass-producible microchip electrophoresis platform that addresses a major unmet need of decentralized hemoglobin analysis in resource-limited settings.
| S-EPMC7315854 | biostudies-literature
Project description:Point-of-care testing (POCT) has broad applications in resource-limited settings. Here, a POCT platform termed POCKET (point-of-care kit for the entire test) is demonstrated that is ultraportable and versatile for analyzing multiple types of DNA in different fields in a sample-to-answer manner. The POCKET is less than 100 g and smaller than 25 cm in length. The kit consists of an integrated chip (i-chip) and a foldable box (f-box). The i-chip integrates the sample preparation with a previously unidentified, triple signal amplification. The f-box uses a smartphone as a heater, a signal detector, and a result readout. We detected different types of DNA from clinics to environment to food to agriculture. The detection is sensitive (<103 copies/ml), specific (single-base differentiation), speedy (<2 hours), and stable (>10 weeks shelf life). This inexpensive, ultraportable POCKET platform may become a versatile sample-to-answer platform for clinical diagnostics, food safety, agricultural protection, and environmental monitoring.
| S-EPMC7176422 | biostudies-literature