Adaptive MCS selection and resource planning for energy-efficient communication in LTE-M based IoT sensing platform.
Ontology highlight
ABSTRACT:
SUBMITTER: Dao NN
PROVIDER: S-EPMC5552094 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:As the enterprise of the "Internet of Things" is rapidly gaining widespread acceptance, sensors are being deployed in an unrestrained manner around the world to make efficient use of this new technological evolution. A recent survey has shown that sensor deployments over the past decade have increased significantly and has predicted an upsurge in the future growth rate. In health-care services, for instance, sensors are used as a key technology to enable Internet of Things oriented health-care monitoring systems. In this paper, we have proposed a two-stage fundamental approach to facilitate the implementation of such a system. In the first stage, sensors promptly gather together the particle measurements of an android application. Then, in the second stage, the collected data are sent over a Femto-LTE network following a new scheduling technique. The proposed scheduling strategy is used to send the data according to the application's priority. The efficiency of the proposed technique is demonstrated by comparing it with that of well-known algorithms, namely, proportional fairness and exponential proportional fairness.
| S-EPMC4859479 | biostudies-literature
Project description:The growing number of radio communication devices and limited spectrum resources are drivers for the development of new techniques of dynamic spectrum access and spectrum sharing. In order to make use of the spectrum opportunistically, the concept of cognitive radio was proposed, where intelligent decisions on transmission opportunities are based on spectrum sensing. In this paper, two Machine Learning (ML) algorithms, namely k-Nearest Neighbours and Random Forest, have been proposed to increase spectrum sensing performance. These algorithms have been applied to Energy Detection (ED) and Energy Vector-based data (EV) to detect the presence of a Fourth Generation (4G) Long-Term Evolution (LTE) signal for the purpose of utilizing the available resource blocks by a 5G new radio system. The algorithms capitalize on time, frequency and spatial dependencies in daily communication traffic. Research results show that the ML methods used can significantly improve the spectrum sensing performance if the input training data set is carefully chosen. The input data sets with ED decisions and energy values have been examined, and advantages and disadvantages of their real-life application have been analyzed.
| S-EPMC6806316 | biostudies-literature
Project description:Nowadays, due to the fast-growing wireless technologies and delay-sensitive applications, Internet of things (IoT) and fog computing will assemble the paradigm Fog of IoT. Since the spread of fog computing, the optimum design of networking and computing resources over the wireless access network would play a vital role in the empower of computing-intensive and delay-sensitive applications under the extent of the energy-limited wireless Fog of IoT. Such applications consume considarable amount of energy when sending and receiving data. Although there many approaches to attain energy efficiency already exist, few of them address the TCP protocol or the MTU size. In this work, we present an effective model to reduce energy consumption. Initially, we measured the consumed energy based on the actual parameters and real traffic for different values of MTU. After that, the work is generalized to estimate the energy consumption for the whole network for different values of its parameters. The experiments were made on different devices and by using different techniques. The results show clearly an inverse proportional relationship between the MTU size and the amount of the consumed energy. The results are promising and can be merged with the existing work to get the optimal solution to reduce the energy consumption in IoT and wireless networks.
| S-EPMC8356661 | biostudies-literature
Project description:There has been a strong growth in aquatic products supported by the global seafood industry. Consumers demand information transparency to support informed decisions and to verify nutrition, food safety, and sustainable operations. Supporting these needs rests on the existence of interoperable Internet of Things (IoT) platforms for traceability that goes beyond the minimum "one up, one down" scheme required by regulators. Seafood farmers, being the source of both food and food-information, are critical to achieving the needed transparency. Traditionally, seafood farmers carry the costs of providing information, while downstream actors reap the benefits, causing limited provision of information. Now, global standards for labelling, data from IoT devices, and the reciprocity of utility from collecting data while sharing them represent great potential for farmers to generate value from traceability systems. To enable this, farmers need an IoT platform integrated with other IoT platforms in the value network. This paper presents a case study of an enterprise-level IoT platform for seafood farmers that satisfies consumers' end-to-end traceability needs while extracting data from requests for information from downstream actors.
| S-EPMC7435956 | biostudies-literature
Project description:As the Internet of Things (IoT) is becoming more pervasive in our daily lives, the number of devices that connect to IoT edges and data generated at the edges are rapidly increasing. On account of the bottlenecks in servers, due to the increase in data, as well as security and privacy issues, the IoT paradigm has shifted from cloud computing to edge computing. Pursuant to this trend, embedded devices require complex computation capabilities. However, due to various constraints, edge devices cannot equip enough hardware to process data, so the flexibility of operation is reduced, because of the limitations of fixed hardware functions, relative to cloud computing. Recently, as application fields and collected data types diversify, and, in particular, applications requiring complex computation such as artificial intelligence (AI) and signal processing are applied to edges, flexible processing and computation capabilities based on hardware acceleration are required. In this paper, to meet these needs, we propose a new IoT platform, called a metamorphic IoT (mIoT) platform, which can various hardware acceleration with limited hardware platform resources, through on-demand transmission and reconfiguration of required hardware at edges instead of via transference of sensing data to a server. The proposed platform reconfigures the edge's hardware with minimal overhead, based on a probabilistic value, known as callability. The mIoT consists of reconfigurable edge devices based on RISC-V architecture and a server that manages the reconfiguration of edge devices based on callability. Through various experimental results, we confirmed that the callability-based mIoT platform can provide the hardware required by the edge device in real time. In addition, by performing various functions with small hardware, power consumption, which is a major constraint of IoT, can be reduced.
| S-EPMC7349509 | biostudies-literature
Project description:This paper presents a detailed study of uplink scheduling in narrowband internet of things (NB-IoT) networks. As NB-IoT devices need a long battery lifetime, we aim to maximize energy efficiency while satisfying the main requirements for NB-IoT devices. Also, as the NB-IoT scheduling problem is divided into link adaptation problem and resource allocation problem, this paper investigates the correlation between these two problems. Accordingly, we propose two scheduling schemes: the joint scheduling scheme, where the two problems are combined as one optimization problem, and the successive scheduling scheme that manages each problem separately but successively. Each scheme aims to maximize energy efficiency while achieving reliable transmission, satisfying delay requirements, and guaranteeing resource allocation specifications. Also, we investigate the impact of the selected devices to be served on the total energy efficiency. Accordingly, we propose two device selection techniques to maximize the total energy efficiency. The first technique exhaustively searches for the optimal devices, while the second sorts the devices based on a proposed priority score. The simulation results compare the successive and the joint scheduling schemes. The results show that the joint scheme outperforms the successive scheme in terms of energy efficiency and the number of served devices but with higher complexity. Also, the results highlight the impact of each proposed selection technique on the scheduling schemes' performance.
| S-EPMC9607220 | biostudies-literature
Project description:The increasing demand for network applications, such as teleconferencing, multimedia messaging and mobile TV, which have diverse requirements, has resulted in the introduction of Long Term Evolution (LTE) by the Third Generation Partnership Project (3GPP). LTE networks implement resource allocation algorithms to distribute radio resource to satisfy the bandwidth and delay requirements of users. However, the scheduling algorithm problem of distributing radio resources to users is not well defined in the LTE standard and thus considerably affects transmission order. Furthermore, the existing radio resource algorithm suffers from performance degradation under prioritised conditions because of the minimum data rate used to determine the transmission order. In this work, a novel downlink resource allocation algorithm that uses quality of service (QoS) requirements and channel conditions to address performance degradation is proposed. The new algorithm is formulated as an optimisation problem where network resources are allocated according to users' priority, whereas the scheduling algorithm decides on the basis of users' channel status to satisfy the demands of QoS. Simulation is used to evaluate the performance of the proposed algorithm, and results demonstrate that it performs better than do all other algorithms according to the measured metrics.
| S-EPMC6347206 | biostudies-literature
Project description:Background: Adaptive designs and platform designs are among two common clinical trial innovations that are increasingly being used to manage medical intervention portfolios and attain faster regulatory approvals. Planning of adaptive and platform trials necessitate simulations to understand how a set of adaptation rules will likely affect the properties of the trial. Clinical trial simulations, however, remain a black box to many clinical trials researchers who are not statisticians. Results: In this article we introduce a simple intuitive open-source browser-based clinical trial simulator for planning adaptive and platform trials. The software application is implemented in RShiny and features a graphical user interface that allows the user to set key clinical trial parameters and explore multiple scenarios such as varying treatment effects, control response and adherence, as well as number of interim looks and adaptation rules. The software provides simulation options for a number of designs such as dropping treatment arms for futility, adding a new treatment arm (i.e., platform design), and stopping a trial early based on superiority. All available adaptations are based on underlying Bayesian probabilities. The software comes with a number of graphical outputs to examine properties of individual simulated trials. The main output is a comparison of trial design performance across several simulations, graphically summarizing type I error (false positive risk), power, and expected cost/time to completion of the considered designs. Conclusion: We have developed and validated an intuitive highly efficient clinical trial simulator for planning of clinical trials. The software is open-source and caters to clinical trial investigators who do not have the statistical capacity for trial simulations available in their team. The software can be accessed via any web browser via the following link: https://mtek.shinyapps.io/hect/.
| S-EPMC6556760 | biostudies-literature
Project description:Being able to identify patients in whom immunological tolerance has been established or is developing would allow an individually tailored approach to post-transplant management of kidney allograft recipients. Ex vivo immunological monitoring was performed on samples from five groups of European renal transplant recipients (“IOT samples”): ten drug-free tolerant recipients who were functionally stable despite remaining immunosuppression-free for more than one year (Tol-DF); also functionally stable patients on minimal immunosuppression (<10 mg/day prednisone, s-LP); stable patients maintained with calcineurin inhibitors (s-CNI); stable patients maintained on CNI-free immunosuppression regimen (s-nCNI); patients showing signs of chronic rejection (CR) and healthy controls (HC). Among the investigation of other biomarkers and bioassays, gene expression profiles were generated on custom Agilent 8x15K 60mer oligonucleotide microarrays (“RISET 2.0”) on the IOT cohort (training set) and on an independent cohort of patients from the ITN (USA) that contained similar groups of patients and included 23 tolerant recipients (“ITN samples”, test set). Set of genes were identified, whose expression on whole blood allowed the identification of 100% of the tolerant recipients in the training set and 84% in the test set. Keywords: classification of clinical samples, tolerance prediction
2010-05-25 | GSE14655 | GEO
Project description:Internet of Things (IoT) technologies have evolved rapidly during the last decade, and many architecture types have been proposed for distributed and interconnected systems. However, most systems are implemented following fragmented approaches for specific application domains, introducing difficulties in providing unified solutions. However, the unification of solutions is an important feature from an IoT perspective. In this paper, we present an IoT platform that supports multiple application layer communication protocols (Representational State Transfer (REST)/HyperText Transfer Protocol (HTTP), Message Queuing Telemetry Transport (MQTT), Advanced Message Queuing Protocol (AMQP), Constrained Application Protocol (CoAP), and Websockets) and that is composed of open-source frameworks (RabbitMQ, Ponte, OM2M, and RDF4J). We have explored a back-end system that interoperates with the various frameworks and offers a single approach for user-access control on IoT data streams and micro-services. The proposed platform is evaluated using its containerized version, being easily deployable on the vast majority of modern computing infrastructures. Its design promotes service reusability and follows a marketplace architecture, so that the creation of interoperable IoT ecosystems with active contributors is enabled. All the platform's features are analyzed, and we discuss the results of experiments, with the multiple communication protocols being tested when used interchangeably for transferring data. Developing unified solutions using such a platform is of interest to users and developers as they can test and evaluate local instances or even complex applications composed of their own IoT resources before releasing a production version to the marketplace.
| S-EPMC6806188 | biostudies-literature