Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Dynamic X-ray radiography reveals particle size and shape orientation fields during granular flow.

ABSTRACT: When granular materials flow, the constituent particles segregate by size and align by shape. The impacts of these changes in fabric on the flow itself are not well understood, and thus novel non-invasive means are needed to observe the interior of the material. Here, we propose a new experimental technique using dynamic X-ray radiography to make such measurements possible. The technique is based on Fourier transformation to extract spatiotemporal fields of internal particle size and shape orientation distributions during flow, in addition to complementary measurements of velocity fields through image correlation. We show X-ray radiography captures the bulk flow properties, in contrast to optical methods which typically measure flow within boundary layers, as these are adjacent to any walls. Our results reveal the rich dynamic alignment of particles with respect to streamlines in the bulk during silo discharge, the understanding of which is critical to preventing destructive instabilities and undesirable clogging. The ideas developed in this paper are directly applicable to many other open questions in granular and soft matter systems, such as the evolution of size and shape distributions in foams and biological materials.

SUBMITTER: Guillard F

PROVIDER: S-EPMC5557931 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

How particle shape affects granular segregation in industrial and geophysical flows.

Project description:Industrial and environmental granular flows commonly exhibit a phenomenon known as "granular segregation," in which grains separate according to physical characteristics (size, shape, density), interfering with industrial applications (cement mixing, medicine, and food production) and fundamentally altering the behavior of geophysical flows (landslides, debris flows, pyroclastic flows, riverbeds). While size-induced segregation has been well studied, the role of grain shape has not. Here we conduct numerical experiments to investigate how grain shape affects granular segregation in dry and wet flows. To isolate the former, we compare dry, bidisperse mixtures of spheres alone with mixtures of spheres and cubes in a rotating drum. Results show that while segregation level generally increases with particle size ratio, the presence of cubes decreases segregation levels compared to cases with only spheres. Further, we find differences in the segregation level depending on which shape makes up each size class, reflecting differences in mobility when smaller grains are cubic or spherical. We find similar dynamics in simulations of a shear-driven coupled fluid-granular flow (e.g., a simulated riverbed), demonstrating that this phenomenon is not unique to rotating drums; however, in contrast to the dry system, we find that the segregation level increases in the presence of cubic grains, and fluid drag effects can qualitatively change segregation trends. Our findings demonstrate competing shape-induced segregation patterns in wet and dry flows that are independent from grain size controls, with implications for many industrial and geophysical processes.

| S-EPMC10861863 | biostudies-literature

Modulation of Immune Responses by Particle Size and Shape.

Project description:The immune system has to cope with a wide range of irregularly shaped pathogens that can actively move (e.g., by flagella) and also dynamically remodel their shape (e.g., transition from yeast-shaped to hyphal fungi). The goal of this review is to draw general conclusions of how the size and geometry of a pathogen affect its uptake and processing by phagocytes of the immune system. We compared both theoretical and experimental studies with different cells, model particles, and pathogenic microbes (particularly fungi) showing that particle size, shape, rigidity, and surface roughness are important parameters for cellular uptake and subsequent immune responses, particularly inflammasome activation and T cell activation. Understanding how the physical properties of particles affect immune responses can aid the design of better vaccines.

| S-EPMC7927956 | biostudies-literature

Particle size fractions

Project description:Prokaryotic communities of soil particle size fractions and their responsiveness to long-term fertilisation

| PRJEB11366 | ENA

The Effect of Particle Size on Thermal Conduction in Granular Mixtures.

Project description:Shredded rubber tire is a geomaterial that is potentially useful in environmental and engineering projects. Here, we study the effect of particle size ratio on the thermal conductivity of granular mixtures containing rubber tire particles. Glass beads were mixed at various volume fractions with rubber particles of varying size. The 3D network model analysis using synthetic packed assemblies was used to determine the dominant factors influencing the thermal conduction of the mixtures. Results present that mixtures with varying size ratios exhibit different nonlinear evolutions of thermal conductivity values with mixture fractions. In particular, mixtures with large insulating materials (e.g., rubber particles) have higher thermal conduction that those with small ones. This is because the larger insulating particles allow better interconnectivity among the conductive particles, thereby avoiding the interruption of the thermal conduction of the conductive particles. Similar tests conducted with natural sand corroborate the significant effect of the relative size of the insulating particles. The 3D network model identifies the heterogeneity of local and effective thermal conductivity and the influence of connectivity among conductive particles. A supplementary examination of electrical conductivity highlights the significance of local and long-range connectivity on conduction paths in granular mixtures.

| S-EPMC5455629 | biostudies-other

Sticking Together: Injectable Granular Hydrogels with Increased Functionality via Dynamic Covalent Inter-Particle Crosslinking.

Project description:Granular hydrogels are an exciting class of microporous and injectable biomaterials that are being explored for many biomedical applications, including regenerative medicine, 3D printing, and drug delivery. Granular hydrogels often possess low mechanical moduli and lack structural integrity due to weak physical interactions between microgels. This has been addressed through covalent inter-particle crosslinking; however, covalent crosslinking often occurs through temporal enzymatic methods or photoinitiated reactions, which may limit injectability and material processing. To address this, a hyaluronic acid (HA) granular hydrogel is developed with dynamic covalent (hydrazone) inter-particle crosslinks. Extrusion fragmentation is used to fabricate microgels from photocrosslinkable norbornene-modified HA, additionally modified with either aldehyde or hydrazide groups. Aldehyde and hydrazide-containing microgels are mixed and jammed to form adhesive granular hydrogels. These granular hydrogels possess enhanced mechanical integrity and shape stability over controls due to the covalent inter-particle bonds, while maintaining injectability due to the dynamic hydrazone bonds. The adhesive granular hydrogels are applied to 3D printing, which allows the printing of structures that are stable without any further post-processing. Additionally, the authors demonstrate that adhesive granular hydrogels allow for cell invasion in vitro. Overall, this work demonstrates the use of dynamic covalent inter-particle crosslinking to enhance injectable granular hydrogels.

| S-EPMC9463088 | biostudies-literature

Relationship between pulmonary blood flow and volume following lung resection using dynamic perfusion digital radiography.

Project description:Surgical intervention for lung resection can cause ventilation-perfusion mismatches and affect gas exchange; however, minimally invasive assessment of blood flow is difficult. This study aimed to evaluate changes in pulmonary blood flow after radical lung cancer surgery using a minimally invasive dynamic digital chest radiography system. We evaluated 64 patients who underwent radical lobectomies. Postoperative changes in pulmonary blood flow, assessed using dynamic chest radiography-based blood flow ratios (BFRs), were compared with the temporal evolution of both functional lung volumes (FLVs) and estimated lung weight (ELW) derived from computed tomography (CT) volumetry. FLVs on the affected side gradually recovered over time from the lowest value observed 3 months after surgery in all procedures. BFRs on the affected side also showed a gradual recovery from the lowest value 1 month after surgery, except for left upper lobectomies (LULs). In LULs, FLVs and ELWs increased proportionally up to 3 months after surgery, with lung volumes continuing to increase thereafter. The recovery of BFRs differed depending on the resected lobe. A relationship between pulmonary blood flow and FLV was observed in the postoperative period. Despite varying compensatory responses depending on the surgical procedure, FLV recovery coincided with increased pulmonary blood flow.

| S-EPMC10636465 | biostudies-literature

Particle Size Determines the Shape of Supraparticles in Self-Lubricating Ternary Droplets.

Project description:Supraparticles are large clusters of much smaller colloidal particles. Controlling the shape and anisotropy of supraparticles can enhance their functionality, enabling applications in fields such as optics, magnetics, and medicine. The evaporation of self-lubricating colloidal ouzo droplets is an easy and efficient strategy to create supraparticles, overcoming the problem of the "coffee-stain effect" during drop evaporation. Yet, the parameters that control the shape of the supraparticles formed in such evaporating droplets are not fully understood. Here, we show that the size of the colloidal particles determines the shape of the supraparticle. We compared the shape of the supraparticles made of seven different sizes of spherical silica particles, namely from 20 to 1000 nm, and of the mixtures of small and large colloidal particles at different mixing ratios. Specifically, our in situ measurements revealed that the supraparticle formation proceeds via the formation of a flexible shell of colloidal particles at the rapidly moving interfaces of the evaporating droplet. The time tc0 when the shell ceases to shrink and loses its flexibility is closely related to the size of particles. A lower tc0, as observed for smaller colloidal particles, leads to a flat pancake-like supraparticle, in contrast to a more curved American football-like supraparticle from larger colloidal particles. Furthermore, using a mixture of large and small colloidal particles, we obtained supraparticles that display a spatial variation in particle distribution, with small colloids forming the outer surface of the supraparticle. Our findings provide a guideline for controlling the supraparticle shape and the spatial distribution of the colloidal particles in supraparticles by simply self-lubricating ternary drops filled with colloidal particles.

| S-EPMC8023807 | biostudies-literature

Cross-sectional tracking of particle motion in evaporating drops: flow fields and interfacial accumulation.

Project description:The lack of an effective technique for three-dimensional flow visualization has limited experimental exploration of the "coffee ring effect" to the two-dimensional, top-down viewpoint. In this report, high-speed, cross-sectional imaging of the flow fields was obtained using optical coherence tomography to track particle motion in an evaporating colloidal water drop. This approach enables z-dimensional mapping of primary and secondary flow fields and changes in these fields over time. These sectional images show that 1 μm diameter polystyrene particles have a highly nonuniform vertical distribution with particles accumulating at both the air-water interface and the water-glass interface during drop evaporation. Particle density and relative humidity are shown to influence interfacial entrapment, which suggests that both sedimentation rate and evaporation rate affect the dynamic changes in the cross-sectional distribution of particles. Furthermore, entrapment at the air-water interface delays the time at which particles reach the ring structure. These results suggest that the organization of the ring structure can be controlled based on the ratio of different density particles in a colloidal solution.

| S-EPMC4915780 | biostudies-literature

Continuous-Flow Synthesis of ZIF-8 Biocomposites with Tunable Particle Size.

Project description:Zeolitic imidazolate framework (ZIF) biocomposites show the capacity to protect and deliver biotherapeutics. To date, the progress in this research area is based on laboratory batch methods. Now, the first continuous flow synthetic method is presented for the encapsulation of a model protein (bovine serum albumin, BSA) and a clinical therapeutic (α1-antitrypsin, AAT) in ZIF-8. The in situ kinetics of nucleation, growth, and crystallization of BSA@ZIF-8 were studied by small-angle X-ray scattering. By controlling the injection time of ethanol, the particle growth could be quenched by ethanol-induced crystallization from amorphous particles to ZIF-8 crystals. The particle size of the biocomposite was tuned in the 40-100 nm range by varying residence time prior to introduction of ethanol. As a proof-of-concept, this procedure was used for the encapsulation of AAT in ZIF-8. Upon release of the biotherapeutic from the composite, the trypsin inhibitor function of AAT was preserved.

| S-EPMC7318291 | biostudies-literature

Dynamic-Ventilatory Digital Radiography in Air Flow Limitation: A Change in Lung Area Reflects Air Trapping.

Project description:ObjectiveThe aim of this study was to determine the utility of dynamic-ventilatory digital radiography (DR) for pulmonary function assessment in patients with airflow limitation.MethodsOne hundred and eighteen patients with airflow limitation (72 patients with lung cancer before surgery, 35 patients with chronic obstructive pulmonary disease [COPD], 6 patients with asthma, and 5 patients with asthma-COPD overlap syndrome) were assessed with dynamic-ventilatory DR. The patients were instructed to inhale and exhale slowly and maximally. Sequential chest X-ray images were captured in 15 frames per second using a dynamic flat-panel imaging system. The relationship between the lung area and the rate of change in the lung area due to respiratory motion with respect to pulmonary function was analyzed.ResultsThe rate of change in the lung area from maximum inspiration to maximum expiration (Rs ratio) was associated with the RV/TLC ratio (r = 0.48, p < 0.01) and the percentage of the predicted FEV1 (r = -0.33, p < 0.01) in patients with airflow limitations. The Rs ratio also decreased in an FEV1-dependent manner.ConclusionThe rate of change in the lung area due to respiratory motion evaluated with dynamic DR reflects air trapping. Dynamic DR is a potential tool for the comprehensive assessment of pulmonary function in patients with COPD.

| S-EPMC7845443 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data