Dataset Information

Simulated sample heating from a nanofocused X-ray beam.

ABSTRACT: Recent developments in synchrotron brilliance and X-ray optics are pushing the flux density in nanofocusing experiments to unprecedented levels, which increases the risk of different types of radiation damage. The effect of X-ray induced sample heating has been investigated using time-resolved and steady-state three-dimensional finite-element modelling of representative nanostructures. Simulations of a semiconductor nanowire indicate that the heat generated by X-ray absorption is efficiently transported within the nanowire, and that the temperature becomes homogeneous after about 5?ns. The most important channel for heat loss is conduction to the substrate, where the heat transfer coefficient and the interfacial area are limiting the heat transport. While convective heat transfer to air is significant, the thermal radiation is negligible. The steady-state average temperature in the nanowire is 8?K above room temperature at the reference parameters. In the absence of heat transfer to the substrate, the temperature increase at the same flux reaches 55?K in air and far beyond the melting temperature in vacuum. Reducing the size of the X-ray focus at constant flux only increases the maximum temperature marginally. These results suggest that the key strategy for reducing the X-ray induced heating is to improve the heat transfer to the surrounding.

SUBMITTER: Wallander H

PROVIDER: S-EPMC5580787 | biostudies-literature | 2017 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Simulated sample heating from a nanofocused X-ray beam.

Wallander Harald H Wallentin Jesper J

Journal of synchrotron radiation 20170802 Pt 5

Recent developments in synchrotron brilliance and X-ray optics are pushing the flux density in nanofocusing experiments to unprecedented levels, which increases the risk of different types of radiation damage. The effect of X-ray induced sample heating has been investigated using time-resolved and steady-state three-dimensional finite-element modelling of representative nanostructures. Simulations of a semiconductor nanowire indicate that the heat generated by X-ray absorption is efficiently tra ...[more]

PMID: 28862614

Similar Datasets

Project description:BackgroundLaser lithotripsy (LL) is a common modality for treatment of children and adolescents with nephrolithiasis. Recent introduction of higher-powered lasers may result in more efficacious "dusting" of urinary calculi. However, in vivo animal studies and computational simulations have demonstrated rapid and sustained rise of fluid temperatures with LL, possibly resulting in irreversible tissue damage. How fluid and tissue heating during LL vary with pediatric urinary tract development, however, is unknown. We hypothesize that kidneys of younger children will be more susceptible to changes in fluid temperature and therefore tissue damage than those of older children.MethodsComputational simulations were developed for LL in children utilizing COMSOL Multiphysics finite-element modeling software. Simulation parameters were varied, including the child's age (3, 8, and 12 years), flow of irrigation fluid (gravity - 5 mL/min or continuous pressure flow - 40 mL/min), treatment location (renal pelvis, ureter, calyx), and power settings (5 W - 40 W). Using a simplified axisymmetric geometry to represent the collecting space, the model accounted for heat transfer via diffusion, convection, perfusion, and heat sourcing as well as tissue properties and blood flow of the urothelium and renal parenchyma. Laminar and heat-induced convection flow were simulated, assuming room-temperature ureteroscopic irrigation. Renal size was varied by age, based on normative values. The maximum fluid temperature after 60 s of simulated LL was captured. Thermal dose was calculated using the t43 equivalence of 240 min as a threshold for tissue damage, as was tissue volume at risk for irreversible cellular damage.ResultsSimulation with gravity flow irrigation revealed generation of thermal doses sufficient to cause tissue injury for all ages at 20 W and 40 W power settings. Higher temperatures were seen in younger ages across all power settings. Temperature increases were dampened with intermittent laser activity and continuous pressure flow irrigation.ConclusionsSmaller renal size is more susceptible to thermal changes induced by LL. However, power settings equal to or greater than 20 W can result in temperatures high enough for tissue damage at any age. Continuous pressure flow and intermittent laser activity may mitigate the potential thermal damage from high power LL.

Dataset Information

Simulated sample heating from a nanofocused X-ray beam.

Publications

Simulated sample heating from a nanofocused X-ray beam.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets