Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Use of iPhone technology in improving acetabular component position in total hip arthroplasty.

ABSTRACT: Improper acetabular cup positioning is associated with high risk of complications after total hip arthroplasty. The aim of our study is to objectively compare 3 methods, namely (1) free hand, (2) alignment jig (Sputnik), and (3) iPhone application to identify an easy, reproducible, and accurate method in improving acetabular cup placement. We designed a simple setup and carried out a simple experiment (see Method section). Using statistical analysis, the difference in inclination angles using iPhone application compared with the freehand method was found to be statistically significant (F[2,51] = 4.17, P = .02) in the "untrained group". There is no statistical significance detected for the other groups. This suggests a potential role for iPhone applications in junior surgeons in overcoming the steep learning curve.

SUBMITTER: Tay XW

PROVIDER: S-EPMC5585821 | biostudies-literature | 2017 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Use of iPhone technology in improving acetabular component position in total hip arthroplasty.

Tay Xiau Wei XW Zhang Benny Xu BX Gayagay George G

Arthroplasty today 20170624 3

Improper acetabular cup positioning is associated with high risk of complications after total hip arthroplasty. The aim of our study is to objectively compare 3 methods, namely (1) free hand, (2) alignment jig (Sputnik), and (3) iPhone application to identify an easy, reproducible, and accurate method in improving acetabular cup placement. We designed a simple setup and carried out a simple experiment (see Method section). Using statistical analysis, the difference in inclination angles using iP ...[more]

PMID: 28913401

Similar Datasets

Acetabular cup position and risk of dislocation in primary total hip arthroplasty.

Project description:Background and purpose - Hip dislocation is one of the most common complications following total hip arthroplasty (THA). Several factors that affect dislocation have been identified, including acetabular cup positioning. Optimal values for cup inclination and anteversion are debatable. We performed a systematic review to describe the different methods for measuring cup placement, target zones for cup positioning, and the association between cup positioning and dislocation following primary THA. Methods - A systematic search of literature in the PubMed database was performed (January and February 2016) to identify articles that compared acetabular cup positioning and the risk of dislocation. Surgical approach and methods for measurement of cup angles were also considered. Results - 28 articles were determined to be relevant to our research question. Some articles demonstrated that cup positioning influenced postoperative dislocation whereas others did not. The majority of articles could not identify a statistically significant difference between dislocating and non-dislocating THA with regard to mean angles of cup anteversion and inclination. Most of the articles that assessed cup placement within the Lewinnek safe zone did not show a statistically significant reduction in dislocation rate. Alternative target ranges have been proposed by several authors. Interpretation - The Lewinnek safe zone could not be justified. It is difficult to draw broad conclusions regarding a definitive target zone for cup positioning in THA, due to variability between studies and the likely multifactorial nature of THA dislocation. Future studies comparing cup positioning and dislocation rate should investigate surgical approach separately. Standardized tools for measurement of cup positioning should be implemented to allow comparison between studies.

| S-EPMC5251254 | biostudies-literature

Catastrophic failure of an acetabular total hip arthroplasty component mimicking a posterior dislocation.

Project description:In our case study, we examine a case of catastrophic failure of a total hip arthroplasty acetabular component leading to complete central wear by the ceramic femoral head, requiring revision total hip arthroplasty. Despite subtle clinical findings, initial orthopaedic evaluation and treatment yielded a diagnosis of total hip arthroplasty dislocation. While a much more common phenomenon, the diagnosis led to futile initial attempts at closed reduction. Our index of suspicion must remain high to pick up on subtle, less common diagnoses we will encounter.

| S-EPMC5365403 | biostudies-literature

Bilateral acetabular fractures treated with delayed total hip arthroplasty.

Project description:Acetabular fractures after seizures are uncommon, and fewer than 30 cases are described in the literature. We present a patient with bilateral acetabular fractures after a seizure, with bilateral quadrilateral plate destruction and protrusio deformity. The patient underwent delayed staggered bilateral total hip arthroplasty 3 months after initial injury, with use of the femoral head as autograft for the protrusio deformities.

| S-EPMC7303498 | biostudies-literature

Cobalt toxicity after revision to a metal-on-polyethylene total hip arthroplasty for fracture of ceramic acetabular component.

Project description:Cobalt metallosis after revision metal-on-polyethylene total hip arthroplasty for catastrophic failure of ceramic components is uncommon but a potentially devastating complication. Common findings associated with heavy metal toxicity include cardiomyopathy, hypothyroidism, skin rashes, visual disturbances, hearing changes, polycythemia, weakness, fatigue, cognitive deterioration, and neuropathy. We report a case of a 57-year-old woman who presented with complaints of progressively worsening hip pain, fatigue, memory loss, lower extremity sensory loss, persistent tachycardia, and ocular changes 5 years after synovectomy and revision of a failed ceramic-on-ceramic total hip arthroplasty to metal-on-polyethylene components. A cobalt level of 788.1 ppb and chromium level of 140 ppb were found on presentation and subsequently decreased to 468.8 ppb and 105.9 ppb, respectively, 2 weeks after revision to a ceramic-on-polyethylene total hip arthroplasty. Improvement of symptoms accompanied this decrease in cobalt and chromium levels. Revision of failed ceramic arthroplasties with later-generation ceramics to avoid this potential complication is recommended.

| S-EPMC4958112 | biostudies-literature

A Deep Learning Tool for Automated Radiographic Measurement of Acetabular Component Inclination and Version After Total Hip Arthroplasty.

Project description:BackgroundInappropriate acetabular component angular position is believed to increase the risk of hip dislocation after total hip arthroplasty. However, manual measurement of these angles is time consuming and prone to interobserver variability. The purpose of this study was to develop a deep learning tool to automate the measurement of acetabular component angles on postoperative radiographs.MethodsTwo cohorts of 600 anteroposterior (AP) pelvis and 600 cross-table lateral hip postoperative radiographs were used to develop deep learning models to segment the acetabular component and the ischial tuberosities. Cohorts were manually annotated, augmented, and randomly split to train-validation-test data sets on an 8:1:1 basis. Two U-Net convolutional neural network models (one for AP and one for cross-table lateral radiographs) were trained for 50 epochs. Image processing was then deployed to measure the acetabular component angles on the predicted masks for anatomical landmarks. Performance of the tool was tested on 80 AP and 80 cross-table lateral radiographs.ResultsThe convolutional neural network models achieved a mean Dice similarity coefficient of 0.878 and 0.903 on AP and cross-table lateral test data sets, respectively. The mean difference between human-level and machine-level measurements was 1.35° (σ = 1.07°) and 1.39° (σ = 1.27°) for the inclination and anteversion angles, respectively. Differences of 5⁰ or more between human-level and machine-level measurements were observed in less than 2.5% of cases.ConclusionWe developed a highly accurate deep learning tool to automate the measurement of angular position of acetabular components for use in both clinical and research settings.Level of evidenceIII.

| S-EPMC8197739 | biostudies-literature

Three-dimensional technology assisted trabecular metal cup and augments positioning in revision total hip arthroplasty with complex acetabular defects.

Project description:BACKGROUND:Revision total hip arthroplasty (THA) with large acetabular defect remains a challenge. Though trabecular metal (TM) cup and augments have been introduced in defect reconstruction with good result, the accurate positioning of implant is important to avoid complications. Therefore, we aimed to evaluate the usefulness of three-dimensional (3D) simulation and 3D model in assisting implant positioning during complex revision THA. METHODS:Sixteen patients (18 hips) who underwent revision THA with a Paprosky type III acetabular defect were analyzed retrospectively. Placement of acetabular cup and TM augments was simulated with 3D simulation software and 3D model preoperatively. Cup anteversion, abduction angle, and hip center were measured in each case preoperatively and postoperatively. Primary outcome was the percentage of outliers according to Lewinnek safe zone and Harris hip score (HHS). Secondary outcome was the correlation between the 3D planned and the postoperative value. RESULTS:The percentage of outliers was significantly corrected from 77.78% (14/18) preoperatively to 38.88% (7/18) postoperatively (p = 0.04). There was a significant correlation between mean planned cup anteversion and postoperative value (13.39 vs 11.99, r = 0.894; p < 0.001). There was a significant correlation between mean planned abduction and postoperative value (42.67 vs 44.91, r = 0.921, p < 0.001). The number of planned and used augments was the same in all the cases. In 15 cases (83.33%), the size of planned and used TM augments was the same. The HHS was significantly improved at final follow-up (80.94 vs 27.50, p < 0.001). No cases presented dislocation or radiological signs of loosening. CONCLUSION:Preoperative 3D simulation and model were considered the useful method to assist implant positioning in revision THA with complex acetabular defect, with moderate to high accuracy and satisfied clinical outcome.

| S-EPMC6907278 | biostudies-literature

Current Concepts in Acetabular Positioning in Total Hip Arthroplasty.

Project description:Being one of the most successful surgeries in the history of medicine, the indications for total hip arthroplasty have widened and are increasingly being offered to younger and fitter patients. This has also led to high expectations for longevity and outcomes. Acetabular cup position has a significant impact on the results of hip arthroplasty as it affects dislocation, abductor muscle strength, gait, limb lengths, impingement, noise generation, range of motion (ROM), wear, loosening, and cup failure. The variables in cup position are depth, height, and angular position (anteversion and inclination). The implications of change in depth of center of rotation (COR) are medialized versus anatomical positioning. As opposed to traditional medialization with beneficial effects on joint reaction force, the advantages of an anatomical position are increasingly recognized. The maintained acetabular offset offers advantages in terms of ROM, impingement, cortical rim press fit, and maintaining medial bone stock. The height of COR influences muscle activity and limb lengths and available bone stock for cup support. On the other hand, ideal angular position remains a matter of much debate and reliably achieving a target angular position remains elusive. This is not helped by variations in the way we describe angular position, with operative, radiologic, or anatomic definitions being used variably to describe anteversion and inclination. Furthermore, pelvic tilt plays a major role in functional positions of the acetabulum. In addition, commonly used techniques of positioning often do not inform us of the real orientation of the pelvis on operating table, with possibility of significant adduction, flexion, and external rotation of the pelvis being possibilities. This review article brings together the evidence on cup positioning and aims to provide a systematic and pragmatic approach in achieving the best position in individual cases.

| S-EPMC5525519 | biostudies-other

The direct anterior approach for acetabular augmentation in primary total hip arthroplasty.

Project description:Addressing acetabular bone defects can be difficult and depends on the amount of bone loss. Augments, either with bone or highly porous metals, are options that still allow the use of a hemispherical cup. Almost all previous research and publication on acetabular augments have focused on revision hip arthroplasty utilizing either a modified lateral or a posterolateral surgical approach. We describe 3 cases of augmenting acetabular bone defects through a direct anterior approach for primary total hip arthroplasty. We achieved proper cup placement, alignment, and augment incorporation while reconstructing complex acetabular deficiencies. All patients had complete pain relief and a satisfactory clinical outcome with stable radiographs at follow-up. With appropriate training, acetabular augmentation can be performed safely and efficiently with excellent clinical results through this approach.

| S-EPMC5859514 | biostudies-literature

Impact of Acetabular Implant Design on Aseptic Failure in Total Hip Arthroplasty.

Project description:BackgroundFailure of cementless acetabular osseointegration is rare in total hip arthroplasty. Nevertheless, new fixation surfaces continue to be introduced. Novel implants may lack large diameter, constrained bearings, or dual mobility (DM) bearings to address instability. We compared clinical and radiographic outcomes for acetabular components with differing fixation surfaces and bearing options, focusing on the relationship between fixation surface and osseointegration and the relationship between bearing options and dislocation rate.MethodsWe retrospectively reviewed 463 total hip arthroplasties implanted with 3 different acetabular components between 2012 and 2016. Records were reviewed for demographics, clinical scores, and complications. Radiographs were examined for evidence of acetabular osteointegration. Analysis of variance and chi-square tests were used to compare cohorts.ResultsAll cohorts had 100% survivorship free of acetabular fixation failure with no differences in clinical scores. Dislocation occurred in 1.3% of cases (n = 6). Analysis of the "transition" sizes, for which brand determined the maximum bearing diameter, revealed a significantly higher dislocation rate (3/50, 6%) in implants with limited bearing options. All 4 revisions for recurrent dislocation involved well-positioned components that did not accept large diameter, constrained bearings, or DM bearings, resulting in 3 shell revisions to expand bearing options. Femoral revisions were associated with dislocation risk but did not vary between cohorts.ConclusionDislocation was the primary mechanical cause for acetabular revision, while acetabular fixation failure was not encountered. We caution against selecting "new and improved" acetabular components without options for large diameter, constrained bearings, or DM bearings, even when enabling technology makes component positioning reliable.

| S-EPMC7818606 | biostudies-literature

Effectiveness of an acetabular positioning device in primary total hip arthroplasty.

Project description:To evaluate the efficacy of a commercially available acetabular positioning device, we performed a prospective evaluation of 40 consecutive patients undergoing primary total hip arthroplasty. All surgery was performed by the same surgeon, in the same operating room, and on the same operating table. The acetabular positioning device was designed to place the component in 45 degrees of abduction. At 6 weeks, all radiographs were evaluated by 3 investigators not involved with the surgery. Each radiograph was evaluated by each reviewer on 3 separate occasions, blinded to the findings of the other reviewer to assess interobserver and intraobserver variability. The mean cup abduction angle was 42.1 degrees, with a range from 23 degrees to 57 degrees (SD 8.3 degrees). Intraobserver and interobserver variability were 0.2 and 0.3 degrees, respectively. The findings of this study demonstrate a wide variability in acetabular cup placement in primary total hip arthroplasty. We believe this is due to movement of the pelvis, which may occur during preparation, draping, and retracting during surgery. We feel surgeons should not rely solely on positioning devices when implanting the acetabular component in total hip arthroplasty. Identification of bone landmarks and determination of superolateral implant coverage noted on preoperative templating is advocated to improve the precision of component position.

| S-EPMC2504141 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data