Image quality of mixed convolution kernel in thoracic computed tomography.
Ontology highlight
ABSTRACT:
SUBMITTER: Neubauer J
PROVIDER: S-EPMC5591158 | biostudies-literature | 2016 Nov
REPOSITORIES: biostudies-literature
Publications
Image quality of mixed convolution kernel in thoracic computed tomography.
Neubauer Jakob J Spira Eva Maria EM Strube Juliane J Langer Mathias M Voss Christian C Kotter Elmar E
Medicine 20161101 44
The mixed convolution kernel alters his properties geographically according to the depicted organ structure, especially for the lung. Therefore, we compared the image quality of the mixed convolution kernel to standard soft and hard kernel reconstructions for different organ structures in thoracic computed tomography (CT) images.Our Ethics Committee approved this prospective study. In total, 31 patients who underwent contrast-enhanced thoracic CT studies were included after informed consent. Axi ...[more]
Similar Datasets
Project description:Lung segmentation is a fundamental step in many image analysis applications for lung diseases and abnormalities in thoracic computed tomography (CT). The authors have previously developed a lung segmentation method based on expectation-maximization (EM) analysis and morphological operations (EMM) for our computer-aided detection (CAD) system for pulmonary embolism (PE) in CT pulmonary angiography (CTPA). However, due to the large variations in pathology that may be present in thoracic CT images, it is difficult to extract the lung regions accurately, especially when the lung parenchyma contains extensive lung diseases. The purpose of this study is to develop a new method that can provide accurate lung segmentation, including those affected by lung diseases.An iterative neutrosophic lung segmentation (INLS) method was developed to improve the EMM segmentation utilizing the anatomic features of the ribs and lungs. The initial lung regions (ILRs) were extracted using our previously developed EMM method, in which the ribs were extracted using 3D hierarchical EM segmentation and the ribcage was constructed using morphological operations. Based on the anatomic features of ribs and lungs, the initial EMM segmentation was refined using INLS to obtain the final lung regions. In the INLS method, the anatomic features were mapped into a neutrosophic domain, and the neutrosophic operation was performed iteratively to refine the ILRs. With IRB approval, 5 and 58 CTPA scans were collected retrospectively and used as training and test sets, of which 2 and 34 cases had lung diseases, respectively. The lung regions manually outlined by an experienced thoracic radiologist were used as reference standard for performance evaluation of the automated lung segmentation. The percentage overlap area (POA), the Hausdorff distance (Hdist), and the average distance (AvgDist) of the lung boundaries relative to the reference standard were used as performance metrics.The proposed method achieved larger POAs and smaller distance errors than the EMM method. For the 58 test cases, the average POA, Hdist, and AvgDist were improved from 85.4±18.4%, 22.6±29.4 mm, and 3.5±5.4 mm using EMM to 91.2±6.7%, 16.0±11.3 mm, and 2.5±1.0 mm using INLS, respectively. The improvements were statistically significant (p<0.05). To evaluate the accuracy of the INLS method in the identification of the lung boundaries affected by lung diseases, the authors separately analyzed the performance of the proposed method on the cases with versus without the lung diseases. The results showed that the cases without lung diseases were segmented more accurately than the cases with lung diseases by both the EMM and the INLS methods, but the INLS method achieved better performance than the EMM method in both cases.The new INLS method utilizing the anatomic features of the rib and lung significantly improved the accuracy of lung segmentation, especially for the cases affected by lung diseases. Improvement in lung segmentation will facilitate many image analysis tasks and CAD applications for lung diseases and abnormalities in thoracic CT, including automated PE detection.
| S-EPMC3732305 | biostudies-other
Project description:PurposeWeighted average dual-energy computed tomography (DE-CT) reconstructions are considered a proxy of standard CT images of the brain, recommended for routine clinical use and used as a reference standard in DE-CT research. However, their image quality has not been assessed, which was the aim of our study.MethodsImages from 81 consecutive patients who underwent both non-contrast single-energy (SE)-CT and DE-CT of the brain on the same scanner were retrospectively evaluated. Attenuation values (HU) and SD of grey matter/white matter (GM/WM) pairs, along with SD in the posterior fossa and subcalvarial region were measured. Four readers evaluated image noise, GM/WM contrast, posterior fossa and subcalvarial artefacts, as well as overall image quality.ResultsWeighted average DE-CT GM and WM HU were significantly lower and noise higher compared to SE-CT (GM HU 36.46 v. 41.82; WM HU 28.18 v. 29.94; GM SD 2.93 v. 2.49; and WM SD 3.16 v. 2.44, all p < 0.0001). After correcting the measured SE-CT noise for 37% higher acquisition dose, DE-CT GM noise became significantly lower (2.93 v. 3.11, p = 0.0121). Measured and dose corrected SE-CT GM/WM contrast-to-noise ratio was superior to weighted average DE-CT (3.42 and 2.74 v. 1.95, both p < 0.0001). Weighted average DE-CT had significantly less artifacts on qualitative analysis.ConclusionWeighted average DE-CT images of the brain yield less artefacts at 37% dose reduction and lower noise at SE-CT equivalent dose. Dose-adjusted GM/WM contrast-to-noise ratio of weighted average DE-CT with 0.4 weighting factor remains inferior to SE-CT images.
| S-EPMC7286188 | biostudies-literature
Project description:IntroductionNovel dedicated extremity cone beam computed tomography (CBCT) devices, recently introduced to the market, raised attention as a possible alternative in advanced diagnostic pediatric trauma imaging, today usually performed by multidetector computed tomography (MDCT). This work aimed to compare image quality and radiation dose of CBCT and MDCT.Materials and methodsFifty-four CBCT-MDCT examination pairs, containing nine MDCTs acquired in parallel prospectively and 45 MDCTs matched in retrospect, were included in this study. Image quality was analyzed semi-objectively by measuring noise, contrast-to-noise ratio (CNR), and signal-to-noise ratios (SNR) and subjectively by performing image impression ratings. CT dose records were readout.ResultsImage noise was significantly lower in CBCT compared with MDCT, both semi-objectively and subjectively (both p <?0.001). CNR and SNRs were also in favor of CBCT, though CBCT examinations exhibited significantly more beam hardening artifacts that diminished the advantages of the superior semi-objective image quality. These artifacts were believed to occur more often in children due to numerous bone-cartilage transitions in open growth plates and may have led to a better subjective diagnostic certainty rating (p =?0.001). Motion artifacts were infrequently, but exclusively observed in CBCT. CT dose index (CTDIvol) was substantially lower in CBCT (p <?0.001).ConclusionDedicated extremity CBCT could be an alternative low-dose modality in the diagnostic pathway of pediatric fractures. At lower doses compared with MDCT and commonly affected by beam hardening artifacts, semi-objective CBCT image quality parameters were generally better than in MDCT.
| S-EPMC7652807 | biostudies-literature
Project description:Anemia is a major global disease burden factor linked to an adverse impact on overall prognosis and negatively affects the quality of life. There are some suggested findings for anemia on non-contrast chest CT, like relatively dense interventricular septum (septal sign) or fairly dense aortic wall (aortic ring sign). The measured attenuation value is a reproducible physical density measurement, readily obtainable from a standard CT examination. There is no reliable cut-off for blood attenuation to suggest anemia on the non-contrast chest CT. In the current study, we evaluated subjective and objective criteria' diagnostic accuracy for diagnosing anemia on unenhanced thoracic CT. This study is approved by Mashhad University of Medical Sciences. The patients admitted in the internal medicine ward of our hospital from June 2019 to March 2020 for whom a non-contrast chest CT was acquired for any non-traumatic medical indication, were enrolled in this retrospective study. For the subjective assessment, the radiologists were asked to record the presence or absence of the "aortic ring sign" and "interventricular septum sign". For the objective evaluations, blood density was measured at various anatomic locations. A total of 325 patients were included in this study. There was a significant correlation between blood attenuation in all measured segments and Hb level (0.78 (R2: 0.61), p = 0.000). Findings revealed that considering the aortic arch threshold value as 20 HU is the best diagnostic performance for detecting severe anemia. Subjective analysis revealed that the aortic ring sign was more sensitive (82.5%) than the interventricular septum sign (32%) in detecting anemia, whereas the latter character was more specific (87% and 99.2%, respectively). The results suggest that it is possible to detect anemia from an unenhanced chest CT scan. Both objective and subjective criteria show promising sensitivity and specificity.
| S-EPMC9741598 | biostudies-literature
Project description:PurposeThe image noise and image quality of a prototype ultra-high-resolution computed tomography (U-HRCT) scanner was evaluated and compared with those of conventional high-resolution CT (C-HRCT) scanners.Materials and methodsThis study was approved by the institutional review board. A U-HRCT scanner prototype with 0.25 mm x 4 rows and operating at 120 mAs was used. The C-HRCT images were obtained using a 0.5 mm x 16 or 0.5 mm x 64 detector-row CT scanner operating at 150 mAs. Images from both scanners were reconstructed at 0.1-mm intervals; the slice thickness was 0.25 mm for the U-HRCT scanner and 0.5 mm for the C-HRCT scanners. For both scanners, the display field of view was 80 mm. The image noise of each scanner was evaluated using a phantom. U-HRCT and C-HRCT images of 53 images selected from 37 lung nodules were then observed and graded using a 5-point score by 10 board-certified thoracic radiologists. The images were presented to the observers randomly and in a blinded manner.ResultsThe image noise for U-HRCT (100.87 ± 0.51 Hounsfield units [HU]) was greater than that for C-HRCT (40.41 ± 0.52 HU; P < .0001). The image quality of U-HRCT was graded as superior to that of C-HRCT (P < .0001) for all of the following parameters that were examined: margins of subsolid and solid nodules, edges of solid components and pulmonary vessels in subsolid nodules, air bronchograms, pleural indentations, margins of pulmonary vessels, edges of bronchi, and interlobar fissures.ConclusionDespite a larger image noise, the prototype U-HRCT scanner had a significantly better image quality than the C-HRCT scanners.
| S-EPMC4564227 | biostudies-literature
Project description:We seek to use computed tomography (CT) to characterize regional lung parenchymal deformation during high-frequency and multi-frequency oscillatory ventilation. Periodic motion of thoracic structures results in artifacts of CT images obtained by standard reconstruction algorithms, especially for frequencies exceeding that of the X-ray source rotation. In this paper, we propose an acquisition and reconstruction technique for high-resolution imaging of the thorax during periodic motion. Our technique relies on phase-binning projections according to the frequency of subject motion relative to the scanner rotation, prior to volumetric reconstruction. The mathematical theory and limitations of the proposed technique are presented, and then validated in a simulated phantom as well as a living porcine subject during oscillatory ventilation. The 4-D image sequences obtained using this frequency-selective reconstruction technique yielded high-spatio-temporal resolution of the thorax during periodic motion. We conclude that the frequency-based selection of CT projections is ideal for characterizing dynamic deformations of thoracic structures that are ordinarily obscured by motion artifact using conventional reconstruction techniques.
| S-EPMC5639881 | biostudies-literature
Project description:Knowledge of the lung vessel morphology in healthy subjects is necessary to improve our understanding about the functional network of the lung and to recognize pathologic deviations beyond the normal inter-subject variation. Established values of normal lung morphology have been derived from necropsy material of only very few subjects. In order to determine morphologic readouts from a large number of healthy subjects, computed tomography pulmonary angiography (CTPA) datasets, negative for pulmonary embolism, and other thoracic pathologies, were analyzed using a fully-automatic, in-house developed artery/vein separation algorithm. The number, volume, and tortuosity of the vessels in a diameter range between 2 and 10 mm were determined. Visual inspection of all datasets was used to exclude subjects with poor image quality or inadequate artery/vein separation from the analysis. Validation of the algorithm was performed manually by a radiologist on randomly selected subjects. In 123 subjects (men/women: 55/68), aged 59 ± 17 years, the median overlap between visual inspection and fully-automatic segmentation was 94.6% (69.2-99.9%). The median number of vessel segments in the ranges of 8-10, 6-8, 4-6, and 2-4 mm diameter was 9, 34, 134, and 797, respectively. Number of vessel segments divided by the subject's lung volume was 206 vessels/L with arteries and veins contributing almost equally. In women this vessel density was about 15% higher than in men. Median arterial and venous volumes were 1.52 and 1.54% of the lung volume, respectively. Tortuosity was best described with the sum-of-angles metric and was 142.1 rad/m (138.3-144.5 rad/m). In conclusion, our fully-automatic artery/vein separation algorithm provided reliable measures of pulmonary arteries and veins with respect to age and gender. There was a large variation between subjects in all readouts. No relevant dependence on age, gender, or vessel type was observed. These data may provide reference values for morphometric analysis of lung vessels.
| S-EPMC5932382 | biostudies-literature
Project description:Background:Concerns about radiation dose in computed tomography (CT) imaging have renewed interest in iterative reconstruction (IR), a technique which has the potential to produce images with less noise at lower radiation doses than traditional filtered back projection (FBP). This study aimed to assess whether application of IR could provide comparable quality sinus CT images to FBP at lower kilovolt (kV) and milliamp (mA) settings, and to establish optimal scan settings for sinus imaging. Methodology/Principal:30 sinus CT scans were performed on 5 cadaver heads at two kV setting and three mA settings. Each scan was reconstructed using FBP and 3 IR settings, yielding a total of 120 images series. Each image set was blinded and randomly reviewed by 3 rhinologists and 2 neuroradiologists. Using a 5-point Likert scale, 16 anatomical landmarks, were graded with respect to image quality. Data were assessed with respect to dose and IR settings using statistical analysis. Results:Higher kV and mAs settings produced significantly higher quality images for structure identification across all 16 landmarks; however, the suitability for surgery did not increase in a linear fashion and plateaued by a total radiation dose of 0.1201 mSv. IR algorithm did not provide a benefit in the overall score of scans at a fixed kV and mAs. Conclusions:Identification of structures in sinus CT imaging significantly correlate with the kV and mA and overall dose of radiation; however, IR did not provide additional benefit in the image quality.
| S-EPMC6292212 | biostudies-literature
Project description:BackgroundCoronary computed tomography angiography (CCTA) requires high spatial and temporal resolution, increased low contrast resolution for the assessment of coronary artery stenosis, plaque detection, and/or non-coronary pathology. Therefore, new reconstruction algorithms, particularly iterative reconstruction (IR) techniques, have been developed in an attempt to improve image quality with no cost in radiation exposure.PurposeTo evaluate whether adaptive statistical iterative reconstruction (ASIR) enhances perceived image quality in CCTA compared to filtered back projection (FBP).Material and methodsThirty patients underwent CCTA due to suspected coronary artery disease. Images were reconstructed using FBP, 30% ASIR, and 60% ASIR. Ninety image sets were evaluated by five observers using the subjective visual grading analysis (VGA) and assessed by proportional odds modeling. Objective quality assessment (contrast, noise, and the contrast-to-noise ratio [CNR]) was analyzed with linear mixed effects modeling on log-transformed data. The need for ethical approval was waived by the local ethics committee as the study only involved anonymously collected clinical data.ResultsVGA showed significant improvements in sharpness by comparing FBP with ASIR, resulting in odds ratios of 1.54 for 30% ASIR and 1.89 for 60% ASIR (P = 0.004). The objective measures showed significant differences between FBP and 60% ASIR (P < 0.0001) for noise, with an estimated ratio of 0.82, and for CNR, with an estimated ratio of 1.26.ConclusionASIR improved the subjective image quality of parameter sharpness and, objectively, reduced noise and increased CNR.
| S-EPMC5384491 | biostudies-literature
Project description:Four-dimensional computed tomography (4D-CT) is commonly used to account for respiratory motion of target volumes in radiotherapy to the thorax. From the 4D-CT acquisition, a maximum-intensity projection (MIP) image set can be created and used to help define the tumor motion envelope or the internal gross tumor volume (iGTV). The purpose of this study was to quantify the differences in automatically contoured target volumes for usage in the delivery of stereotactic body radiation therapy using MIP data sets generated from one of the four methods: (1) 4D-CT phase-binned (PB) based on retrospective phase calculations, (2) 4D-CT phase-corrected phase-binned (PC-PB) based on motion extrema, (3) 4D-CT amplitude-binned (AB), and (4) cine CT built from all available images.MIP image data sets using each of the four methods were generated for a cohort of 28 patients who had prior thoracic 4D-CT scans that exhibited lung tumor motion of at least 1 cm. Each MIP image set was automatically contoured on commercial radiation treatment planning system. Margins were added to the iGTV to observe differences in the final simulated planning target volumes (PTVs).For all patients, the iGTV measured on the MIP generated from the entire cine CT data set (iGTVcine) was the largest. Expressed as a percentage of iGTVcine, 4D-CT iGTV (all sorting methods) ranged from 83.8% to 99.1%, representing differences in the absolute volume ranging from 0.02 to 4.20 cm3; the largest average and range of 4D-CT iGTV measurements was from the PC-PB data set. Expressed as a percentage of PTVcine (expansions applied to iGTVeine), the 4D-CT PTV ranged from 87.6% to 99.6%, representing differences in the absolute volume ranging from 0.08 to 7.42 cm3. Regions of the measured respiratory waveform corresponding to a rapid change of phase or amplitude showed an increased susceptibility to the selection of identical images for adjacent bins. Duplicate image selection was most common in the AB implementation, followed by the PC-PB method. The authors also found that the image associated with the minimum amplitude measurement did not always correlate with the image that showed maximum tumor motion extent.The authors identified cases in which the MIP generated from a 4D-CT sorting process under-represented the iGTV by more than 10% or up to 4.2 cm3 when compared to the iGTVcine. They suggest utilization of a MIP generated from the full cine CT data set to ensure maximum inclusive tumor extent.
| S-EPMC3810265 | biostudies-other