Dataset Information

Clinical comparison of the stain removal efficacy of two air polishing powders.

ABSTRACT: OBJECTIVES:Air polishing with sodium bicarbonate powders with a grain size of 40 ?m is recommended for patient comfort. However, the efficacy of small grain size on stain removal has not been adequately studied. This study aimed to compare the stain removal efficacy of sodium bicarbonate powders with grain sizes of 65 and 40 ?m and to evaluate patient acceptance and operator opinion after using both air polishing powders. MATERIALS AND METHODS:A double-blind, randomized, split-mouth study was conducted with 35 participants with moderate to heavy dental staining on both sides of the upper teeth. Removal of dental stains on the index teeth was performed using sodium bicarbonate powders with a grain size of either 65 or 40 ?m. The time taken to completely remove all dental stains was recorded. After treatment, a questionnaire was used to evaluate patient acceptance and the operator's opinion. RESULTS:The average time for the removal of all stains by powder was 4.5 ± 3.6 min with a grain size of 65 ?m and 4.4 ± 3.8 min with a grain size of 40 ?m. The difference in the average time between the two groups was not significant (P = 0.461). The operator's opinions of the two powders were identical, and patient acceptance did not differ significantly between the two types of powders. CONCLUSIONS:The 40 ?m sodium bicarbonate powder removed dental stains as efficiently as the 65-?m powder. Powder handling and patient acceptance were comparable between grain sizes of 65 and 40 ?m.

SUBMITTER: Hongsathavij R

PROVIDER: S-EPMC5594968 | biostudies-literature | 2017 Jul-Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Clinical comparison of the stain removal efficacy of two air polishing powders.

Hongsathavij Rosalin R Kuphasuk Yosvimol Y Rattanasuwan Kanyawat K

European journal of dentistry 20170701 3

<h4>Objectives</h4>Air polishing with sodium bicarbonate powders with a grain size of 40 μm is recommended for patient comfort. However, the efficacy of small grain size on stain removal has not been adequately studied. This study aimed to compare the stain removal efficacy of sodium bicarbonate powders with grain sizes of 65 and 40 μm and to evaluate patient acceptance and operator opinion after using both air polishing powders.<h4>Materials and methods</h4>A double-blind, randomized, split-mou ...[more]

PMID: 28932149

Similar Datasets

Project description:BACKGROUND:Increased composite roughness enhances bacterial adhesion and discoloration, thus increasing the risk of gingival inflammation and secondary caries. Concerns about detrimental effects of sodium bicarbonate on surface roughness influenced the development of less abrasive powders: a glycine-based powder and an erythritol-based powder, additionally - sodium bicarbonate-based powder of reduced grain size. However, there is limited evidence on effects of these materials on the surface of dental fillings. The aim of the present study was to compare the effects of three air-polishing powders (of a reduced abrasiveness) on surface roughness of microhybrid restorative composite material. MATERIAL AND METHODS:Microhybrid light-cure resin composite samples were placed on 64 plaster cubes and light-cured through polyester strips. Surface roughness was measured using laser confocal microscope (magnification 2160x). The specimens were randomly divided into three groups (n = 20, 20 and 24) and air-polished with: sodium bicarbonate (40 μm), glycine (25 μm) and erythritol (14 μm), respectively. Then surface roughness was remeasured, keeping the same field of observation. Specialized 3D analysis software was used for data processing. Parameters according to ISO 25178: Sa, Sq, Sku, Sp, Sv, Sz, Ssk were used to describe surface roughness. RESULTS:Sa, Sq, Sp, Sv, Sz increased significantly following air polishing. Ssk was significantly higher, whereas Sku was significantly lower in sodium bicarbonate and erythritol groups than before air polishing. Comparison between the three powders revealed that Sa was significantly higher in sodium bicarbonate group than in glycine group. Sku was significantly higher in glycine and erythritol groups than in sodium bicarbonate group. CONCLUSIONS:Sodium bicarbonate has a stronger detrimental effect on composite surface than glycine or erythritol. No advantage of erythritol comparing to glycine could be found.

Project description:BackgroundSupportive periodontal therapy (SPT) is the key for a stable periodontal health following active treatment. Likewise, implant maintenance is crucial following implant placement. This systematic review aimed to assess clinical outcomes, patients' perception, and cost-effectiveness of repeated periodontal therapy with air polishing devices (APDs) in comparison with hand instruments and/or power-driven instruments (conventional interventions) in SPT and implant maintenance.MethodsElectronic search for randomised controlled clinical trials with minimum 6 months follow-up for SPT and implant maintenance programme was conducted for data published from 01 January 2000 to 30 April 2020 using multiple databases and hand searching. Risk of bias was assessed using the Revised Cochrane Risk-of-Bias tool (RoB 2).ResultsA total of 823 articles were screened. 4 SPT and 2 implant maintenance studies were eligible for inclusion. For SPT, repeated APDs interventions revealed no statistically significant difference when compared to the conventional interventions (weighted mean difference [WMD] 0.11 mm, p = 0.08). Likewise, no statistical difference was noted in terms of percentage of bleeding on probing (BOP) and clinical attachment level (CAL) gain. APDs were associated with lower pain score (based on Visual Analogue Scale) and higher patient acceptance in SPT studies. For implant maintenance, APDs resulted in reduction in PPD and percentage of BOP. However, CAL gain was comparable between the two groups. In terms of patient reported outcomes, no implant maintenance studies recorded any forms of patient reported outcomes. In addition, no studies reported on economic evaluation of APDs in both SPT and implant maintenance.ConclusionWithin the limitations of this systematic review and meta-analysis, repeated subgingival debridement using APDs in SPT resulted in similar clinical outcomes but better patients' comfort when compared to the conventional interventions. For implant maintenance, there is limited evidence to show that repeated application of APDs leads to improved clinical outcomes when compared to conventional treatments.

Project description:ObjectivesTo date, scarce evidence exists around the application of subgingival air-polishing during treatment of severe periodontitis. The aim of this study was to evaluate the effect on the health-related and periodontitis-related subgingival microbiome of air-polishing during non-surgical treatment of deep bleeding pockets in stage III-IV periodontitis patients.Materials and methodsForty patients with stage III-IV periodontitis were selected, and pockets with probing depth (PD) 5-9 mm and bleeding on probing were selected as experimental sites. All patients underwent a full-mouth session of erythritol powder supragingival air-polishing and ultrasonic instrumentation. Test group received additional subgingival air-polishing at experimental sites. Subgingival microbial samples were taken from the maxillary experimental site showing the deepest PD at baseline. Primary outcome of the first part of the present study was the 3-month change in the number of experimental sites. Additional analysis of periodontal pathogens and other sub-gingival plaque bacteria sampled at one experimental site at baseline and 3 months following treatment was performed through a real-time quantitative PCR microarray.ResultsIn the test group, a statistical increase of some health-related species was observed (Abiotropha defectiva, Capnocytophaga sputigena, and Lautropia mirabilis), together with the decrease of pathogens such as of Actinomyces israelii, Catonella morbi, Filifactor alocis, Porphyromonas endodontalis, Sele-nomonas sputigena, Tannerella forsythia, Treponema denticola, and Treponema socranskii. In the control group, statistical significance was found only in the decrease of Filifactor alocis, Tannerella forsythia, and Treponema socranskii.ConclusionsThe addition of erythritol-chlorhexidine powder seems to cause a shift of the periodontal micro-biome toward a more eubiotic condition compared to a conventional treatment. The study was registered on Clinical Trials.gov (NCT04264624).Clinical relevanceSubgingival air-polishing could help re-establishing a eubiotic microbioma in deep bleeding periodontal pockets after initial non-surgical treatment.

Project description:Background:Glycine air polishing has been proved to be safe, comfortable and time-saving. Whether it could substitute ultrasonic scaling to remove dental plaque biofilm during periodontal maintenance remains unclear. The purposes of this study were to evaluate the effect of supragingival glycine air polishing (SGAP) on the subgingival periodontal pathogens during maintenance therapy and to check the association of periodontal pathogens and clinical parameters. Methods:Twenty-three chronic periodontitis patients during their maintenance therapy were enrolled in the 12-week study. According to randomized split-mouth design, the test side was treated with SGAP (65 ?m), while the control side was treated with supragingival ultrasonic scaling and polishing (SUSP) with rubber cup. Clinical examination including plaque index (PLI), probing depth (PD), bleeding index (BI) were performed at baseline and 12 weeks post-treatment. Sampling of the subgingival plaque at each investigational site (mesiobuccal site of the mandibular first molar) was performed at baseline and 2, 4, 8, 12 weeks after maintenance treatment. Four periodontal pathogens including Porphyromonas gingivalis, Tannerella forsythia, Treponema denticola and Fusobacterium nucleatum were detected by 16S rDNA polymerase chain reaction. Results:Clinical status generally improved after treatment in both groups. PLI in both groups, PD in SGAP group and bleeding on probing (%) in SUSP group significantly decreased after treatment (p < 0.05). There was no significant difference of clinical parameters between two groups before and after treatment. The detection rates of P. gingivalis, T. denticola in both groups, T. forsythia in SUSP group and F. nucleatum in SGAP group decreased after maintenance treatment in both groups, although no significant difference was found, and it rebound to baseline level at 12 weeks after maintenance treatment. There was no significant difference between SGAP group and SUSP group at any time point. T. denticola-positive sites had significantly greater BI than T. denticola-negative sites (p < 0.05). Discussion:Supragingival glycine air polishing had a reliable effect in removing subgingival dental plaque biofilm during maintenance period, and three months may be a proper maintenance interval for pockets not more than 5 mm.

Dataset Information

Clinical comparison of the stain removal efficacy of two air polishing powders.

Publications

Clinical comparison of the stain removal efficacy of two air polishing powders.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets