Ferroelectric self-assembled molecular materials showing both rectifying and switchable conductivity.
Ontology highlight
ABSTRACT:
SUBMITTER: Gorbunov AV
PROVIDER: S-EPMC5621973 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:A facile ferroelectric nanostructures preparation method is developed based on the self-assembly of poly(2-vinylpyridine)-b-poly(vinylidene fluoride-co-trifluoroethylene)-b-poly(2-vinylpyridine) triblock copolymers (P2VP-b-P(VDF-TrFE)-b-P2VP), and the effect of morphological characteristics of the block copolymers on the ferroelectric response has been investigated for the first time. By simple adjustment of the ratio between the blocks, lamellar, cylindrical, and spherical morphologies are obtained in the melt and preserved upon crystallization of P(VDF-TrFE). However, at high P(VDF-TrFE) content, crystallization becomes dominant and drives the self-assembly of block copolymers. The crystallization study of the block copolymers reveals the preservation of the high degree of crystallinity inside the confined nanodomains as well as the reduction of the crystalline size and the Curie transition temperature with the confinement level. Only a small difference in the coercive field and the shape of the hysteresis loop is observed for block copolymers with a lamellar morphology produced either by crystallization-driven self-assembly or by confinement inside preformed lamellar domains. In contrast, delayed spontaneous polarization or the absence of dipole switching is demonstrated for the confinement of ferroelectric crystals inside both isolated cylindrical and spherical domains, exemplifying the influence of dimensionality on the critical size for ferroelectric order.
| S-EPMC6328973 | biostudies-literature
Project description:We present a new ferroelectric nematic material, 4-((4'-((trans)-5-ethyloxan-2-yl)-2',3,5,6'-tetrafluoro-[1,1'-biphenyl]-4-yl)difluoromethoxy)-2,6-difluorobenzonitrile (AUUQU-2-N) and its higher homologues, the molecular structures of which include fluorinated building blocks, an oxane ring, and a terminal cyano group, all contributing to a large molecular dipole moment of about 12.5 D. We observed that AUUQU-2-N has three distinct liquid crystal phases, two of which were found to be polar phases with a spontaneous electric polarization Ps of up to 6 µC cm-2. The highest temperature phase is a common enantiotropic nematic (N) exhibiting only field-induced polarization. The lowest-temperature, monotropic phase proved to be a new example of the ferroelectric nematic phase (NF), evidenced by a single-peak polarization reversal current response, a giant imaginary dielectric permittivity on the order of 103, and the absence of any smectic layer X-ray diffraction peaks. The ordinary nematic phase N and the ferroelectric nematic phase NF are separated by an antiferroelectric liquid crystal phase which has low permittivity and a polarization reversal current exhibiting a characteristic double-peak response. In the polarizing light microscope, this antiferroelectric phase shows characteristic zig-zag defects, evidence of a layered structure. These observations suggest that this is another example of the recently discovered smectic ZA (SmZA) phase, having smectic layers with the molecular director parallel to the layer planes. The diffraction peaks from the smectic layering have not been observed to date but detailed 2D X-ray studies indicate the presence of additional short-range structures including smectic C-type correlations in all three phases-N, SmZA and NF-which may shed new light on the understanding of polar and antipolar order in these phases.
| S-EPMC11319781 | biostudies-literature
Project description:Dinuclear gold complexes have the ability to interact with one or more substrates in a dual-activation mode, leading to different reactivity and selectivity than their mononuclear relatives. In this contribution, this difference was used to control the catalytic properties of a gold-based catalytic system by site-isolation of mononuclear gold complexes by selective encapsulation. The typical dual-activation mode is prohibited by this catalyst encapsulation, leading to typical behavior as a result of mononuclear activation. This strategy can be used as a switch (on/off) for a catalytic reaction and also permits reversible control over the product distribution during the course of a reaction.
| S-EPMC5053284 | biostudies-literature
Project description:We synthesized self-assembled nucleobases (SANs), such as 1-dodecylthymine (DOT) or 9-dodecyladenine (DOA), in which the nucleobase is immobilized on a long alkyl chain. The thermal stability of the SAN was increased by mixing with the acidic surfactant mono-dodecyl phosphate (MDP). Additionally, the SAN-MDP composite material showed proton conductivity of 4.62 × 10-4 S cm-1 at 160 °C under anhydrous conditions. Additionally, the activation energy of the proton conduction was approximately 0.2 eV and this value was one order of magnitude higher than that of a typical humidified perfluorinated membrane, in which the proton can be moved by vehicle molecules, such as water molecules. In contrast, when the nucleobase without the immobilization of a long alkyl chain was mixed with MDP, the proton conductivity of these composite materials was two orders of magnitude less than that of the SAN-MDP composite. Therefore, we measured the XRD spectra of the SAN-MDP composite material. As a result, the SAN-MDP composite material showed a self-assembled structure with a two-dimensional proton conducting pathway, such as a lamellar structure, and that the anhydrous proton conduction was related to the interaction between the nucleobase of the SAN and the phosphate group of MDP. Consequently, the self-assembled nucleobase derivatives have the potential for use as novel anhydrous proton conductors with a two-dimensional proton conducting pathway.
| S-EPMC9074914 | biostudies-literature
Project description:The majority of current vaccines depend on a continuous "cold chain" of storage and handling between 2 and 8°C. Vaccines experiencing temperature excursions outside this range can suffer from reduced potency. This thermal sensitivity results in significant losses of vaccine material each year and risks the administration of vaccines with diminished protective ability, issues that are heightened in the developing world. Here, using peptide self-assemblies based on the fibril-forming peptide Q11 and containing the epitopes OVA323-339 from ovalbumin or ESAT651-70 from Mycobacterium tuberculosis, the chemical, conformational, and immunological stability of supramolecular peptide materials were investigated. It was expected that these materials would exhibit advantageous thermal stability owing to their adjuvant-free and fully synthetic construction. Neither chemical nor conformational changes were observed for either peptide when stored at 45°C for 7days. ESAT651-70-Q11 was strongly immunogenic whether it was stored as a dry powder or as aqueous nanofibers, showing undiminished immunogenicity even when stored as long as six months at 45°C. This result was in contrast to ESAT651-70 conjugated to a protein carrier and adjuvanted with alum, which demonstrated marked thermal sensitivity in these conditions. Antibody titers and affinities were undiminished in mice for OVA323-339-Q11 if it was stored as assembled nanofibers, yet some diminishment was observed for material stored as a dry powder. The OVA study was done in a different mouse strain and with a different prime/boost regimen, and so it should not be compared directly with the study for the ESAT epitope. This work indicates that peptide self-assemblies can possess attractive thermal stability properties in the context of vaccine development.Almost all current vaccines must be maintained within a tight and refrigerated temperature range, usually between 2 and 8°C. This presents significant challenges for their distribution, especially in the developing world. Here we report on the surprisingly robust thermal stability of a self-assembled peptide vaccine. In particular a self-assembled peptide vaccine containing a tuberculosis epitope maintained all of its potency in mice when exposed to an extreme thermal treatment of six months at 45°C. In a different mouse model, we investigated another model epitope and found some storage conditions where potency was diminished. Overall this study illustrates that some self-assembled peptide vaccines can have remarkable thermal stability.
| S-EPMC4821069 | biostudies-literature
Project description:Low-density materials with tailorable properties have attracted attention for decades, yet stiff materials that can resiliently tolerate extreme forces and deformation while being manufactured at large scales have remained a rare find. Designs inspired by nature, such as hierarchical composites and atomic lattice-mimicking architectures, have achieved optimal combinations of mechanical properties but suffer from limited mechanical tunability, limited long-term stability, and low-throughput volumes that stem from limitations in additive manufacturing techniques. Based on natural self-assembly of polymeric emulsions via spinodal decomposition, here we demonstrate a concept for the scalable fabrication of nonperiodic, shell-based ceramic materials with ultralow densities, possessing features on the order of tens of nanometers and sample volumes on the order of cubic centimeters. Guided by simulations of separation processes, we numerically show that the curvature of self-assembled shells can produce close to optimal stiffness scaling with density, and we experimentally demonstrate that a carefully chosen combination of topology, geometry, and base material results in superior mechanical resilience in the architected product. Our approach provides a pathway to harnessing self-assembly methods in the design and scalable fabrication of beyond-periodic and nonbeam-based nano-architected materials with simultaneous directional tunability, high stiffness, and unsurpassed recoverability with marginal deterioration.
| S-EPMC7084143 | biostudies-literature
Project description:Simultaneous improvement of strength and conductivity is urgently demanded but challenging for bimetallic materials. Here we show by creating a self-assembled lamellar (SAL) architecture in W-Cu system, enhancement in strength and electrical conductivity is able to be achieved at the same time. The SAL architecture features alternately stacked Cu layers and W lamellae containing high-density dislocations. This unique layout not only enables predominant stress partitioning in the W phase, but also promotes hetero-deformation induced strengthening. In addition, the SAL architecture possesses strong crack-buffering effect and damage tolerance. Meanwhile, it provides continuous conducting channels for electrons and reduces interface scattering. As a result, a yield strength that doubles the value of the counterpart, an increased electrical conductivity, and a large plasticity were achieved simultaneously in the SAL W-Cu composite. This study proposes a flexible strategy of architecture design and an effective method for manufacturing bimetallic composites with excellent integrated properties.
| S-EPMC10904369 | biostudies-literature
Project description:Spin and valley degrees of freedom in materials without inversion symmetry promise previously unknown device functionalities, such as spin-valleytronics. Control of material symmetry with electric fields (ferroelectricity), while breaking additional symmetries, including mirror symmetry, could yield phenomena where chirality, spin, valley, and crystal potential are strongly coupled. Here we report the synthesis of a halide perovskite semiconductor that is simultaneously photoferroelectricity switchable and chiral. Spectroscopic and structural analysis, and first-principles calculations, determine the material to be a previously unknown low-dimensional hybrid perovskite (R)-(-)-1-cyclohexylethylammonium/(S)-(+)-1 cyclohexylethylammonium) PbI3. Optical and electrical measurements characterize its semiconducting, ferroelectric, switchable pyroelectricity and switchable photoferroelectric properties. Temperature dependent structural, dielectric and transport measurements reveal a ferroelectric-paraelectric phase transition. Circular dichroism spectroscopy confirms its chirality. The development of a material with such a combination of these properties will facilitate the exploration of phenomena such as electric field and chiral enantiomer-dependent Rashba-Dresselhaus splitting and circular photogalvanic effects.
| S-EPMC7048427 | biostudies-literature
Project description:The racemic oxovanadium(IV) salmmen complexes, [VO((rac)-(4-X-salmmen))] (X?=?C12C10C5 (1), C16 (2), and C18 (3); salmmen?=?N,N'-monomethylenebis-salicylideneimine) with "banana shaped" molecular structures were synthesized, and their ferroelectric properties were investigated. These complexes exhibit well-defined hysteresis loops in their viscous phases, moreover, 1 also displays liquid crystal behaviour. We observed a synergetic effect influenced by three structural aspects; the methyl substituents on the ethylene backbone, the banana shaped structure and the square pyramidal metal cores all play an important role in generating the observed ferroelectricity, pointing the way to a useful strategy for the creation of advanced ferroelectric soft materials.
| S-EPMC4645115 | biostudies-literature
Project description:Self assembling wire networks typically evolve to minimize the resistance across electrical contacts which are frequently used in a manner comparable to Hebbian learning. In this work, we demonstrate that electrical fields can also be used to cause an increase in the resistance of the wire network. We show that if such a wire is exposed to a transverse electric field, the wire is deformed in a way that depends on it's tensile strength. We measure the wire resistance as a function of transverse field for several field strengths and show that by deforming the wire, the amplitude of the resulting shape can be modified in a controllable fashion. At a critical value of the transverse field, we show that the wire loses stability. At this point we observe thresholding behavior in that the resistance increases abruptly to a maximum value and the wire is destroyed. This thresholding behavior suggests that self assembled wires may be manipulated via an transverse electric field and demonstrates that a mechanism exists for the destruction of undesirable connections.
| S-EPMC4604515 | biostudies-other