OsiriX software as a preoperative planning tool in cranial neurosurgery: A step-by-step guide for neurosurgical residents.
Ontology highlight
ABSTRACT: Background
OsiriX (Pixmeo, Switzerland) is an open-source Digital Imaging and Communications in Medicine (DICOM) viewer that is gaining more and more attention in the neurosurgical community because of its user-friendly interface, powerful three-dimensional (3D) volumetric rendering capabilities, and various options for data integration. This paper presents in detail the use of OsiriX software as a preoperative planning tool in cranial neurosurgery.Methods
In January 2013, OsiriX software was introduced into our clinical practice as a preoperative planning tool. Its capabilities are being evaluated on an ongoing basis in routine elective cranial cases.Results
The program has proven to be highly effective at volumetrically representing data from radiological examinations in 3D. Among its benefits in preoperative planning are simulating the position and exact location of the lesion in 3D, tailoring the skin incision and craniotomy bone flap, enhancing the representation of normal and pathological anatomy, and aiding in planning the reconstruction of the affected area.Conclusion
OsiriX is a useful tool for preoperative planning and visualization in neurosurgery. The software greatly facilitates the surgeon's understanding of the relationship between normal and pathological anatomy and can be used as a teaching tool.
SUBMITTER: Spiriev T
PROVIDER: S-EPMC5655755 | biostudies-literature | 2017
REPOSITORIES: biostudies-literature
Publications
OsiriX software as a preoperative planning tool in cranial neurosurgery: A step-by-step guide for neurosurgical residents.
Spiriev Toma T Nakov Vladimir V Laleva Lili L Tzekov Christo C
Surgical neurology international 20171010
<h4>Background</h4>OsiriX (Pixmeo, Switzerland) is an open-source Digital Imaging and Communications in Medicine (DICOM) viewer that is gaining more and more attention in the neurosurgical community because of its user-friendly interface, powerful three-dimensional (3D) volumetric rendering capabilities, and various options for data integration. This paper presents in detail the use of OsiriX software as a preoperative planning tool in cranial neurosurgery.<h4>Methods</h4>In January 2013, OsiriX ...[more]
Similar Datasets
Project description:Three-dimensional planning of hip arthroplasty is associated with better visualisation of anatomical landmarks and enhanced mapping for preoperative implant sizing, which can lead to a decrease in surgical time and complications. Despite the advantages of hip resurfacing arthroplasty (HRA), it is considered a technically challenging procedure and associated with inaccurate implant placement. This study aimed to examine the validity, reliability, and usability of preoperative 3D Hip Planner software for HRA. Fifty random cases of various hip osteoarthritis severity were planned twice by two junior trainees using the 3D Hip Planner within a one-month interval. Outcome measures included femoral/cup implant size, stem-shaft angle, and cup inclination angle, and were assessed by comparing outcomes from 2D and 3D planning. An adapted unified theory of acceptance and use of technology (UTAUT) survey was used for software usability. Bland–Altman plots between 3D and 2D planning for stem-shaft and inclination angles showed mean differences of 0.7 and −0.6, respectively (r = 0.93, p < 0.001). Stem-shaft and inclination angles showed inter-rater reliability biases of around −2° and 3°, respectively. Chi-square and Pearson’s correlation for femoral implant size showed a significant association between the two assessors (r = 0.91, p < 0.001). The 3D test–retest coefficient of repeatability for stem-shaft and inclination angles were around ±2° and ±3°, respectively, with a strong significant association for femoral implant size (r = 0.98, p < 0.001). Survey analyses showed that 70–90% agreed that 3D planning improved expectancy in four domains. 3D hip planner appears to be valid and reliable in preoperative HRA and shows significant potential in optimising the quality and accuracy of surgical planning.
| S-EPMC10451941 | biostudies-literature
Project description:PurposeOpen-wedge high tibial osteotomy (HTO) is a common surgical treatment for medial osteoarthritis in young and active patients. The accuracy of osteotomy is closely associated with postoperative efficacy. The accuracy of digital preoperative planning is higher than that of the preoperative manual measurement and several computer software with varying accuracy and convenience are used for digital preoperative planning. This study aimed to use the SolidWorks software for HTO preoperative planning and to determine its accuracy and reliability in HTO preoperative planning.MethodsWe reviewed the data of 28 patients with 54 with medial compartment knee arthritis who underwent open-wedge HTO preoperative planning using SolidWorks between June 2019 and March 2021. The standard anteroposterior standing whole-leg radiographs were assessed before and 6 weeks after the surgery. The correction angle, weight-bearing line (WBL) ratio, mechanical femorotibial angle (mFTA), and medial proximal tibial angle (MPTA) before and after the surgery were compared. The clinical results were evaluated using the Knee Society score.ResultsAt 6 weeks after the surgery, the WBL ratio was corrected from 16.8% to 50.5%, mFTA was corrected from 6.4° varus to 1.2° valgus, and MPTA was corrected from 83.4° to 89.3°. No significant difference was observed between the predicted correction angle before the surgery and the correction angle measured 6 weeks after the surgery (t = -1.745, p = 0.087). The knee score and function score of Knee Society increased from 76.4 and 80.7 before surgery to 95.0 and 95.7, respectively.ConclusionsThe SolidWorks software showed high accuracy and reliability in preoperative planning of open-wedge HTO in patients with medial compartment knee arthritis.
| S-EPMC9852509 | biostudies-literature
Project description:BackgroundPresurgical three-dimensional (3D) reconstructions allow spatial localization of cerebral lesions and their relationship with adjacent anatomical structures for optimal surgical resolution. The purpose of the present article is to present a method of virtual preoperative planning aiming to enhance 3D comprehension of neurosurgical pathologies using free DICOM image viewers.Case descriptionWe describe the virtual presurgical planning of a 61-year-old female presenting a cerebral tumor. 3D reconstructions were created with the "Horos®" Digital Imaging and Communications in Medicine viewer, utilizing images obtained from contrast-enhanced brain magnetic resonance imaging and computed tomography. The tumor and adjacent relevant structures were identified and delimited. A sequential virtual simulation of the surgical stages for the approach was performed with the identification of local gyral and vascular patterns of the cerebral surface for posterior intraoperative recognition. Through virtual simulation, an optimal approach was gained. Accurate localization and complete removal of the lesion were achieved during the surgical procedure. Virtual presurgical planning with open-source software can be utilized for supratentorial pathologies in both urgent and elective cases. Virtual recognition of vascular and cerebral gyral patterns is helpful reference points for intraoperative localization of lesions lacking cortical expression, allowing less invasive corticotomies.ConclusionDigital manipulation of cerebral structures can increase anatomical comprehension of neurosurgical lesions to be treated. 3D interpretation of neurosurgical pathologies and adjacent anatomical structures is essential for developing an effective and safe surgical approach. The described technique is a feasible and accessible option for presurgical planning.
| S-EPMC9990789 | biostudies-literature
Project description:PurposeThe neuroimaging research community-which includes a broad range of scientific, medical, statistical, and engineering disciplines-has developed many tools to advance our knowledge of brain structure, function, development, aging, and disease. Past research efforts have clearly shaped clinical practice. However, translation of new methodologies into clinical practice is challenging. Anything that can reduce these barriers has the potential to improve the rate at which research outcomes can contribute to clinical practice. In this article, we introduce Karawun, a file format conversion tool, that has become a key part of our work in translating advances in diffusion imaging acquisition and analysis into neurosurgical practice at our institution.MethodsKarawun links analysis workflows created using open-source neuroimaging software, to Brainlab (Brainlab AG, Munich, Germany), a commercially available surgical planning and navigation suite. Karawun achieves this using DICOM standards supporting representation of 3D structures, including tractography streamlines, and thus offers far more than traditional screenshot or color overlay approaches.ResultsWe show that neurosurgical planning data, created from multimodal imaging data using analysis methods implemented in open-source research software, can be imported into Brainlab. The datasets can be manipulated as if they were created by Brainlab, including 3D visualizations of white matter tracts and other objects.ConclusionClinicians can explore and interact with the results of research neuroimaging pipelines using familiar tools within their standard clinical workflow, understand the impact of the new methods on their practice and provide feedback to methods developers. This capability has been important to the translation of advanced analysis techniques into practice at our institution.
| S-EPMC9883338 | biostudies-literature
Project description:PurposePrior in silico simulations propose that Temporally Feathered Radiation Therapy (TFRT) may reduce toxicity related to head and neck radiation therapy. In this study we demonstrate a step-by-step guide to TFRT planning with modern treatment planning systems.MethodsOne patient with oropharyngeal cancer planned for definitive radiation therapy using intensity-modulated radiation therapy (IMRT) techniques was replanned using the TFRT technique. Five organs at risk (OAR) were identified to be feathered. A "base plan" was first created based on desired planning target volumes (PTV) coverage, plan conformality, and OAR constraints. The base plan was then re-optimized by modifying planning objectives, to generate five subplans. All beams from each subplan were imported onto one trial to create the composite TFRT plan. The composite TFRT plan was directly compared with the non-TFRT IMRT plan. During plan assessment, the composite TFRT was first evaluated followed by each subplan to meet preset compliance criteria.ResultsThe following organs were feathered: oral cavity, right submandibular gland, left submandibular gland, supraglottis, and OAR Pharynx. Prescription dose PTV coverage (>95%) was met in each subplan and the composite TFRT plan. Expected small variations in dose were observed among the plans. The percent variation between the high fractional dose and average low fractional dose was 29%, 28%, 24%, 19%, and 10% for the oral cavity, right submandibular, left submandibular, supraglottis, and OAR pharynx nonoverlapping with the PTV.ConclusionsTemporally Feathered Radiation Therapy planning is possible with modern treatment planning systems. Modest dosimetric changes are observed with TFRT planning compared with non-TFRT IMRT planning. We await the results of the current prospective trial to seeking to demonstrate the feasibility of TFRT in the modern clinical workflow (NCT03768856). Further studies will be required to demonstrate the potential benefit of TFRT over non-TFRT IMRT Planning.
| S-EPMC7386183 | biostudies-literature
Project description:Boosted regression trees. excellent for data-poor spatial management but hard to useMarine resource managers and scientists often advocate spatial approaches to manage data-poor species. Existing spatial prediction and management techniques are either insufficiently robust, struggle with sparse input data, or make suboptimal use of multiple explanatory variables. Boosted Regression Trees feature excellent performance and are well suited to modelling the distribution of data-limited species, but are extremely complicated and time-consuming to learn and use, hindering access for a wide potential user base and therefore limiting uptake and usage.Brts automated and simplified for accessible general use with rich feature setWe have built a software suite in R which integrates pre-existing functions with new tailor-made functions to automate the processing and predictive mapping of species abundance data: by automating and greatly simplifying Boosted Regression Tree spatial modelling, the gbm.auto R package suite makes this powerful statistical modelling technique more accessible to potential users in the ecological and modelling communities. The package and its documentation allow the user to generate maps of predicted abundance, visualise the representativeness of those abundance maps and to plot the relative influence of explanatory variables and their relationship to the response variables. Databases of the processed model objects and a report explaining all the steps taken within the model are also generated. The package includes a previously unavailable Decision Support Tool which combines estimated escapement biomass (the percentage of an exploited population which must be retained each year to conserve it) with the predicted abundance maps to generate maps showing the location and size of habitat that should be protected to conserve the target stocks (candidate MPAs), based on stakeholder priorities, such as the minimisation of fishing effort displacement.Gbm.auto for management in various settingsBy bridging the gap between advanced statistical methods for species distribution modelling and conservation science, management and policy, these tools can allow improved spatial abundance predictions, and therefore better management, decision-making, and conservation. Although this package was built to support spatial management of a data-limited marine elasmobranch fishery, it should be equally applicable to spatial abundance modelling, area protection, and stakeholder engagement in various scenarios.
| S-EPMC5720763 | biostudies-literature
Project description:Introduction Opportunities for in-country neurosurgical training are severely limited in LMICs, particularly due to rigorous educational requirements and prohibitive upfront costs. Research question This study aims to evaluate financial barriers aspiring neurosurgeons face in accessing and completing neurosurgical training, specifically in LMICs, in order to determine the barriers to equitable access to training. Material and methods In order to assess the financial costs of accessing and completing neurosurgery residency, an electronic survey was administered to those with the most recent experience with the process: aspiring neurosurgeons, neurosurgical trainees, and recent neurosurgery graduates. We attempted to include a broad representation of World Health Organization (WHO) geographic regions and World Bank income classifications in order to determine differences among regions and countries of different income levels. Results Our survey resulted in 198 unique responses (response rate 31.3%), of which 83% (n = 165) were from LMICs. Cost data were reported for 48 individual countries, of which 26.2% were reported to require trainees to pay for their neurosurgical training. Payment amounts varied amongst countries, with multiple countries having costs that surpassed their annual gross national income as defined by the World Bank. Discussion and conclusions Opportunities for formal neurosurgical training are severely limited, especially in LMICs. Cost is an important barrier that can not only limit the capacity to train neurosurgeons but can also perpetuate inequitable access to training. Additional investment by governments and other stakeholders can help develop a sufficient workforce and reduce inequality for the next generation of neurosurgeons worldwide. Highlights • Of the 633 participants invited to participate in the study, 198 responded, giving a response rate of 31.3%. Of the 198 respondents, 33 (16.70%) were from HICs and 165 (83.30%) were from LMICs.• Data on cost was reported for only 48 countries. Out of those countries, 26.2% were reported to require trainees to pay for their neurosurgical training.• LMIC respondents were significantly more likely to report having to pay for their neurosurgical training compared to their HIC colleagues (p = 0.006).
| S-EPMC9562254 | biostudies-literature
Project description:BackgroundDiffusion tensor imaging (DTI) infers the trajectory and location of large white matter tracts by measuring the anisotropic diffusion of water. DTI data may then be analyzed and presented as tractography for visualization of the tracts in 3 dimensions. Despite the important information contained in tractography images, usefulness for neurosurgical planning has been limited by the inability to define which are critical structures within the mass of demonstrated fibers and to clarify their relationship to the tumor.ObjectiveTo develop a method to allow the interactive querying of tractography data sets for surgical planning and to provide a working software package for the research community.MethodsThe tool was implemented within an open source software project. Echo-planar DTI at 3 T was performed on 5 patients, followed by tensor calculation. Software was developed that allowed the placement of a dynamic seed point for local selection of fibers and for fiber display around a segmented structure, both with tunable parameters. A neurosurgeon was trained in the use of software in < 1 hour and used it to review cases.ResultsTracts near tumor and critical structures were interactively visualized in 3 dimensions to determine spatial relationships to lesion. Tracts were selected using 3 methods: anatomical and functional magnetic resonance imaging-defined regions of interest, distance from the segmented tumor volume, and dynamic seed-point spheres.ConclusionInteractive tractography successfully enabled inspection of white matter structures that were in proximity to lesions, critical structures, and functional cortical areas, allowing the surgeon to explore the relationships between them.
| S-EPMC3112275 | biostudies-literature
Project description:ObjectivesWe developed a Pediatric Transport Triage Tool (PT3) to objectively guide selection of team composition and transport mode, thereby standardizing transport planning. Previously, modified Pediatric Early Warning Score for transport has been used to assess illness severity but not to guide transport decision making.MethodsThe PT3 was created for pediatric transport by combining objective evaluations of neurologic, cardiovascular, and respiratory systems with a systems-based medical condition list to identify diagnoses requiring expedited transport and/or advanced team composition not captured by neurologic, cardiovascular, and respiratory systems alone. A scoring algorithm was developed to guide transport planning. Transport data (mode, team composition, time to dispatch, patient disposition, and complications) were collected before and after PT3 implementation at a single tertiary care center over an 18-month period.ResultsWe reviewed 2237 inbound pediatric transports. Transport mode, patient disposition, and dispatch time were unchanged over the study period. Fewer calls using a transport nurse were noted after PT3 implementation (33.9% vs 30%, P = 0.05), with a trend toward fewer rotor-wing transports and transports requiring physicians. The majority of users, regardless of experience level, reported improved transport standardization with the tool. Need to upgrade team composition or mode during transport was not different during the study period. No adverse patient safety events occurred with PT3 use.ConclusionsThe PT3 represents an objective triage tool to reduce variability in transport planning. The PT3 decreased resource utilization and was not associated with adverse outcomes. Teams with dynamic staffing models, various experience levels, and multiple transport modes may benefit from this standardized assessment tool.
| S-EPMC6526089 | biostudies-literature
Project description:IntroductionTechnological advancements provided several preoperative tools allowing for precise preoperative planning in cranial neurosurgery, aiming to increase the efficacy and safety of surgery. However, little data are available regarding if and how young neurosurgeons are trained in using such technologies, how often they use them in clinical practice, and how valuable they consider these technologies.Research questionHow frequently these technologies are used during training and clinical practice as well as to how their perceived value can be qualitatively assessed.Materials and methodsThe Young Neurosurgeons' Committee (YNC) of the European Association of Neurosurgical Societies (EANS) distributed a 14-items survey among young neurosurgeons between June 1st and August 31st, 2022.ResultsA total of 441 responses were collected. Most responders (42.34%) received "formal" training during their residency. Planning techniques were used mainly in neuro-oncology (90.86%), and 3D visualization of patients' DICOM dataset using open-source software was the most frequently used (>20 times/month, 20.34% of responders). Software for 3D visualization of patients' DICOM dataset was the most valuable technology, especially for planning surgical approach (42.03%). Conversely, simulation based on augmented/mixed/virtual reality was considered the less valuable tool, being rated below sufficiency by 39.7% of responders.Discussion and conclusionTraining for using preoperative planning technologies in cranial neurosurgery is provided by neurosurgical residency programs. Software for 3D visualization of DICOM datasets is the most valuable and used tool, especially in neuro-oncology. Interestingly, simulation tools based on augmented/virtual/mixed reality are considered less valuable and, therefore, less used than other technologies.
| S-EPMC10668051 | biostudies-literature