Browse
Submit Data
Databases
API
Help

Dataset Information

27 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A thin multifunctional coating on a separator improves the cyclability and safety of lithium sulfur batteries.

ABSTRACT: Lithium-sulfur batteries are one of the most promising next-generation batteries due to their high theoretical specific capacity, but are impeded by the low utilization of insulating sulfur, unstable morphology of the lithium metal anode, and transport of soluble polysulfides. Here, by coating a layer of nano titanium dioxide and carbon black onto a commercial polypropylene separator, we demonstrate a new composite separator that can confine the polysulfides on the cathode side, forming a catholyte chamber, and at the same time block the dendritic lithium on the anode side. Lithium-sulfur batteries using this separator show a high initial capacity of 1206 mA h g-1 and a low capacity decay rate of 0.1% per cycle at 0.5C. Analyses reveal the electrocatalytic effect and the excellent dendrite-blocking capability of the ?7 µm thick coating.

SUBMITTER: Xu G

PROVIDER: S-EPMC5676610 | biostudies-literature | 2017 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

A thin multifunctional coating on a separator improves the cyclability and safety of lithium sulfur batteries.

Xu Guiyin G Yan Qing-Bo QB Wang Shitong S Kushima Akihiro A Bai Peng P Liu Kai K Zhang Xiaogang X Tang Zilong Z Li Ju J

Chemical science 20170717 9

Lithium-sulfur batteries are one of the most promising next-generation batteries due to their high theoretical specific capacity, but are impeded by the low utilization of insulating sulfur, unstable morphology of the lithium metal anode, and transport of soluble polysulfides. Here, by coating a layer of nano titanium dioxide and carbon black onto a commercial polypropylene separator, we demonstrate a new composite separator that can confine the polysulfides on the cathode side, forming a cathol ...[more]

PMID: 29449934

Similar Datasets

Mo<sub>2</sub>C-Loaded Porous Carbon Nanosheets as a Multifunctional Separator Coating for High-Performance Lithium-Sulfur Batteries.

Project description:Lithium-sulfur batteries have emerged as one of the promising next-generation energy storage devices. However, the dissolution and shuttling of polysulfides in the electrolyte leads to a rapid decrease in capacity, severe self-discharge, and poor high-temperature performance. Here, we demonstrate the design and preparation of a Mo2C nanoparticle-embedded carbon nanosheet matrix material (Mo2C/C) and its application in lithium-sulfur battery separator modification. As a polar catalyst, Mo2C/C can effectively adsorb and promote the reversible conversion of lithium polysulfides, suppress the shuttle effect, and improve the electrochemical performance of the battery. The lithium-sulfur battery with the Mo2C/C =-modified separator showed a good rate of performance with high specific capacities of 1470 and 799 mAh g-1 at 0.1 and 2 C, respectively. In addition, the long-cycle performance of only 0.09% decay per cycle for 400 cycles and the stable cycling under high sulfur loading indicate that the Mo2C/C-modified separator holds great promise for the development of high-energy-density lithium-sulfur batteries.

| S-EPMC9964068 | biostudies-literature

Cationic covalent organic framework nanosheets as the coating layer of commercial separator for high-efficiency lithium-sulfur batteries.

Project description:Ion-selective separators, are crucial and in high demand for maximizing the performance of lithium-sulfur (Li-S) batteries, which can conduct lithium ions while efficiently blocking polysulfides. However, commercial separators cannot effectively block the shuttle of polysulfides after multiple cycles due to their large porosity and easy dissolution, resulting in a reduced battery life. Herein, a covalent organic framework nanosheets (CON) ion-coated separator is prepared on the commercial separator. Due to the smaller pore size of CON-TFSI compared to polysulfides, the CON-TFSI modified separator can effectively block the polysulfide from migrating across the separator. By incorporating this innovative functional layer, Li-S batteries demonstrate outstanding performance. In a Li-S battery featuring a sulfur loading of 0.6 mg/cm2, it attains an initial discharge specific capacity of up to 891.9 mA h g-1, and exhibits the capacity retention of 54.6 % after 500 cycles at a current density of 0.2 C. This work offers a fresh perspective on the advancement of high-performance membranes for Li-S batteries.

| S-EPMC11369462 | biostudies-literature

Boron Nitride Nanotube-Based Separator for High-Performance Lithium-Sulfur Batteries.

Project description:To prevent global warming, ESS development is in progress along with the development of electric vehicles and renewable energy. However, the state-of-the-art technology, i.e., lithium-ion batteries, has reached its limitation, and thus the need for high-performance batteries with improved energy and power density is increasing. Lithium-sulfur batteries (LSBs) are attracting enormous attention because of their high theoretical energy density. However, there are technical barriers to its commercialization such as the formation of dendrites on the anode and the shuttle effect of the cathode. To resolve these issues, a boron nitride nanotube (BNNT)-based separator is developed. The BNNT is physically purified so that the purified BNNT (p-BNNT) has a homogeneous pore structure because of random stacking and partial charge on the surface due to the difference of electronegativity between B and N. Compared to the conventional polypropylene (PP) separator, the p-BNNT loaded PP separator prevents the dendrite formation on the Li metal anode, facilitates the ion transfer through the separator, and alleviates the shuttle effect at the cathode. With these effects, the p-BNNT loaded PP separators enable the LSB cells to achieve a specific capacity of 1429 mAh/g, and long-term stability over 200 cycles.

| S-EPMC8746311 | biostudies-literature

A Light-Thin Chitosan Nanofiber Separator for High-Performance Lithium-Ion Batteries.

Project description:With the development of portable devices and wearable devices, there is a higher demand for high-energy density and light lithium-ion batteries (LIBs). The separator is a significant component directly affecting the performance of LIBs. In this paper, a thin and porous chitosan nanofiber separator was successfully fabricated using the simple ethanol displacement method. The thickness of the CME15 separator was about half that of mainstream commercial Celgard2325 separators. Owing to its inherent polarity and high porosity, the obtained CME15 separator achieved a small contact angle (18°) and excellent electrolyte wettability (324% uptake). The CME15 separator could maintain excellent thermal dimensional stability at 160 °C. Furthermore, the CME15 separator-based LIBs exhibited excellent cycling performance after 100 cycles (117 mAh g-1 at 1 C). The present work offers a perspective on applying a chitosan nanofiber separator in light and high-performance lithium-ion batteries (LIBs).

| S-EPMC10648088 | biostudies-literature

Multilayer Nanofiber Composite Separator for Lithium-Ion Batteries with High Safety.

Project description:An original Von Koch curve-shaped tipped electrospinneret was used to prepare a polyimide (PI)-based nanofiber membrane. A multilayer Al2O3@polyimide/polyethylene/Al2O3@polyimide (APEAP) composite membrane was tactfully designed with an Al2O3@ polyimide (AP) membrane as outer shell, imparting high temperature to the thermal run-away separator performance and a core polyethylene (PE) layer imparts the separator with a thermal shut-down property at low temperature (123 °C). An AP electrospun nanofiber was obtained by doping Al2O3 nanoparticles in PI solution. The core polyethylene layer was prepared using polyethylene powder and polyterafluoroethylene (PTFE) miniemulsion through a coating process. The addition of PTFE not only bonds PE power, but also increases the adhesion force between the PE and AP membranes. As a result, the multilayer composite separator has high safety, outstanding electrochemical properties, and better cycling performance as a lithium-ion battery separator.

| S-EPMC6835787 | biostudies-literature

Multifunctional Sandwich-Structured Electrolyte for High-Performance Lithium-Sulfur Batteries.

Project description:Due to its high theoretical energy density (2600 Wh kg-1), low cost, and environmental benignity, the lithium-sulfur (Li-S) battery is attracting strong interest among the various electrochemical energy storage systems. However, its practical application is seriously hampered by the so-called shuttle effect of the highly soluble polysulfides. Herein, a novel design of multifunctional sandwich-structured polymer electrolyte (polymer/cellulose nonwoven/nanocarbon) for high-performance Li-S batteries is demonstrated. It is verified that Li-S battery with this sandwich-structured polymer electrolyte delivers excellent cycling stability (only 0.039% capacity decay cycle-1 on average exceeding 1500 cycles at 0.5 C) and rate capability (with a reversible capacity of 594 mA h g-1 at 4 C). These electrochemical performances are attributed to the synergistic effect of each layer in this unique sandwich-structured polymer electrolyte including steady lithium stripping/plating, strong polysulfide absorption ability, and increased redox reaction sites. More importantly, even with high sulfur loading of 4.9 mg cm-2, Li-S battery with this sandwich-structured polymer electrolyte can deliver high initial areal capacity of 5.1 mA h cm-2. This demonstrated strategy here may open up a new era of designing hierarchical structured polymer electrolytes for high-performance Li-S batteries.

| S-EPMC5867043 | biostudies-literature

Thin Solid Electrolyte Separators for Solid-State Lithium-Sulfur Batteries.

Project description:The lithium-sulfur battery is one of the most promising "beyond Li-ion" battery chemistries owing to its superior gravimetric energy density and low cost. Nonetheless, its commercialization has been hindered by its low cycle life due to the polysulfide shuttle and nonuniform Li-metal plating and stripping. Thin and dense solid electrolyte separators could address these issues without compromising on energy density. Here, we introduce a novel argyrodite (Li6PS5Cl)-carboxylated nitrile butadiene rubber (XNBR) composite thin solid electrolyte separator (TSE) (<50 μm) processed by a scalable calendering technique and compatible with Li-metal. When integrated in a full cell with a commercial tape-cast sulfur cathode (3.54 mgS cm-2) in the presence of an in situ polymerized lithium bis(fluorosulfonyl)imide-polydioxolane catholyte and a 100 μm Li-metal foil anode, we demonstrate stable cycling for 50 cycles under realistic operating conditions (stack pressure of <1 MPa and 30 °C).

| S-EPMC9801416 | biostudies-literature

Sandwich-Type Nitrogen and Sulfur Codoped Graphene-Backboned Porous Carbon Coated Separator for High Performance Lithium-Sulfur Batteries.

Project description:Lithium-sulfur (Li-S) batteries have been identified as the greatest potential next- generation energy-storage systems because of the large theoretical energy density of 2600 Wh kg-1. However, its practical application on a massive scale is impeded by severe capacity loss resulted from the notorious polysulfides shuttle. Here, we first present a novel technique to synthesize sandwich-type nitrogen and sulfur codoped graphene-backboned porous carbon (NSGPC) to modify the commercial polypropylene separator in Li-S batteries. The as-synthesized NSGPC exhibits a unique micro/mesoporous carbon framework, large specific surface area (2439.0 m² g-1), high pore volume (1.78 cm³ g-1), good conductivity, and in situ nitrogen (1.86 at %) and sulfur (5.26 at %) co-doping. Benefiting from the particular physical properties and chemical components of NSGPC, the resultant NSGPC-coated separator not only can facilitate rapid Li? ions and electrons transfer, but also can restrict the dissolution of polysulfides to alleviate the shuttle effect by combining the physical absorption and strong chemical adsorption. As a result, Li-S batteries with NSGPC-coated separator exhibit high initial reversible capacity (1208.6 mAh g-1 at 0.2 C), excellent rate capability (596.6 mAh g-1 at 5 C), and superior cycling stability (over 500 cycles at 2 C with 0.074% capacity decay each cycle). Propelling our easy-designed pure sulfur cathode to a extremely increased mass loading of 3.4 mg cm-2 (70 wt. % sulfur), the Li-S batteries with this functional composite separator exhibit a superior high initial capacity of 1171.7 mAh g-1, which is quite beneficial to commercialized applications.

| S-EPMC5923521 | biostudies-literature

Janus Separator of Polypropylene-Supported Cellular Graphene Framework for Sulfur Cathodes with High Utilization in Lithium-Sulfur Batteries.

Project description:Owing to the conversion chemistry of the sulfur cathode, the lithium-sulfur (Li-S) batteries exhibit high theoretical energy density. However, the intrinsic mobile redox centers during the sulfur/Li2S-to-lithium polysulfides solid-to-liquid phase transition induce low sulfur utilization and poor cycling life. Herein, the Janus separator of mesoporous cellular graphene framework (CGF)/polypropylene membrane to promote the utilization of sulfur cathode is introduced. The porous polypropylene membrane serves as an insulating substrate in contact with lithium anode while CGFs that possess high electrical conductivity of 100 S cm-1, a large mesopore volume of 3.1 cm3 g-1, and a huge surface area of 2120 m2 g-1 are adhered on cathode side to reactivate the shuttling-back polysulfides and to preserve the ion channels. Therefore, the Li-S cell with the "two-face" CGF Janus separator exhibit a high initial capacity of 1109 mAh g-1 and superior capacity preserved upon 800 mAh g-1 after 250 cycles at 0.2 C, which is 40% higher on sulfur utilization efficiency than the corresponding results with routine polypropylene separators. There are significant improvements on capacity as well as electrochemical kinetics. A very high areal capacity of 5.5 mAh cm-2 combined with high sulfur content of 80% and areal loading amount of 5.3 mg cm-2 is achieved for such advanced configuration. The negative impact of shuttle mechanism on lowering the utilization of sulfur and overall energy density of a Li-S battery is well eliminated by applying CGF separators. Consequently, employing carbonaceous materials as Janus face of separators enlightens new opportunities for improving the utilization of active materials and energy density of devices that involve complex phase evolution and conversion electrochemistry.

| S-EPMC5054863 | biostudies-literature

Suppressing the Shuttle Effect in Lithium-Sulfur Batteries by a UiO-66-Modified Polypropylene Separator.

Project description:The lithium-sulfur battery is one of the most promising battery technologies with high energy density that exceeds the presently commercialized ones. The shuttle effect caused by the migration of soluble polysulfides to the lithium anode is known as one of the crucial issues that prevent the Li-S batteries from practical application. Modification of the separator is regarded as a convenient yet efficient strategy to alleviate the shuttle effect. In this report, we use a thermally stable and chemically robust metal-organic framework (MOF), UiO-66, as a physical and chemical barrier for soluble polysulfides to functionalize the commercial polypropylene separator. The Li-S cell assembled with such a separator shows a significantly improved cycling stability with an average specific capacity of ca. 720 mA h g-1 at a current rate of 0.5 C for 500 cycles. Experimental and theoretical investigations indicate that the cell performance enhancement results from the physical restriction of the MOF barrier layer and strong chemical interaction between UiO-66 and polysulfides. The excellent thermal stability and chemical robustness (in acid/alkali solutions, conventional organic solvents, and polysulfide electrolytes) of UiO-66 make it highly competitive among various materials developed for separator modification in Li-S batteries.

| S-EPMC6648104 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data