Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Experimental data on load test and performance parameters of a LENZ type vertical axis wind turbine in open environment condition.

ABSTRACT: Performance and load testing data of a three bladed two stage LENZ type vertical axis wind turbine from the experiments conducted in an open environment condition at Hindustan Institute of Technology and Science, Chennai (location 23.2167°N, 72.6833°E) are presented here. Low-wind velocity ranging from 2 to 11 m/s is available everywhere irrespective of climatic seasons and this data provides the support to the researchers using numerical tool to validate and develop an enhanced Lenz type design. Raw data obtained during the measurements are processed and presented in the form so as to compare with other typical outputs. The data is measured at different wind speeds prevalent in the open field condition ranging from 3 m/s to 9 m/s.

SUBMITTER: Sivamani S

PROVIDER: S-EPMC5686457 | biostudies-literature | 2017 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Experimental data on load test and performance parameters of a LENZ type vertical axis wind turbine in open environment condition.

Sivamani Seralathan S T Micha Premkumar MP Sohail Mohammed M T Mohan M V Hariram H

Data in brief 20171107

Performance and load testing data of a three bladed two stage LENZ type vertical axis wind turbine from the experiments conducted in an open environment condition at Hindustan Institute of Technology and Science, Chennai (location 23.2167°N, 72.6833°E) are presented here. Low-wind velocity ranging from 2 to 11 m/s is available everywhere irrespective of climatic seasons and this data provides the support to the researchers using numerical tool to validate and develop an enhanced Lenz type design ...[more]

PMID: 29167813

Similar Datasets

Reliability Estimation of Parameters of Helical Wind Turbine with Vertical Axis.

Project description:Due to the prolonged use of wind turbines they must be characterized by high reliability. This can be achieved through a rigorous design, appropriate simulation and testing, and proper construction. The reliability prediction and analysis of these systems will lead to identifying the critical components, increasing the operating time, minimizing failure rate, and minimizing maintenance costs. To estimate the produced energy by the wind turbine, an evaluation approach based on the Monte Carlo simulation model is developed which enables us to estimate the probability of minimum and maximum parameters. In our simulation process we used triangular distributions. The analysis of simulation results has been focused on the interpretation of the relative frequency histograms and cumulative distribution curve (ogive diagram), which indicates the probability of obtaining the daily or annual energy output depending on wind speed. The experimental researches consist in estimation of the reliability and unreliability functions and hazard rate of the helical vertical axis wind turbine designed and patented to climatic conditions for Romanian regions. Also, the variation of power produced for different wind speeds, the Weibull distribution of wind probability, and the power generated were determined. The analysis of experimental results indicates that this type of wind turbine is efficient at low wind speed.

| S-EPMC4488534 | biostudies-other

Experimental data of the study on H-rotor with semi-elliptic shaped bladed vertical axis wind turbine.

Project description:The performance and load test data of the proposed H-rotor with semi-elliptical shaped blade vertical axis wind turbine is carried out at the laboratory using 1 m diameter axial fan. India has a long coastline and low-wind velocity ranging from 3 to 10 m/s which is available everywhere in the country irrespective of climatic conditions. The data article is carried out at different aspect ratios along with tilt of the blades and without tilting of the blades. These data sets provide the researchers to further study experimentally as well as numerically in order to enhance the performance of the proposed VAWT. The data presented here are measured at wind velocity ranging from 3 to 6 m/s. The raw data captured using data acquisition system are processed and presented in a form so as to compare it with other typical VAWT.

| S-EPMC6141365 | biostudies-literature

Influence of Wind Tunnel Test Duration on Wind Load Factors.

Project description:A method is presented for calculating the uncertainty associated with the estimation of peak pressure coefficients from wind tunnel test records of various lengths and how this uncertainty influences design wind effects. The proposed method is applicable to any type of structure and any type of civil engineering aerodynamic testing facility, including large-scale facilities. As an example of the application of the method, an investigation is presented of time series belonging to five categories of pressure coefficients implicit in Chapter 27 of the ASCE 7-10 Standard. The results of the investigation show that, for typical civil engineering wind tunnels, estimated design wind effects based on tests with durations as low as 10 s, corresponding to prototype durations of less than 6 min, are larger than their counterparts based on tests with 100 s duration by only approximately 5%. The proposed method provides useful indications on minimum lengths of pressure records to be measured in wind tunnels.

| S-EPMC7905990 | biostudies-literature

Experimental Study of a Reference Model Vertical-Axis Cross-Flow Turbine.

Project description:The mechanical power, total rotor drag, and near-wake velocity of a 1:6 scale model (1.075 m diameter) of the US Department of Energy's Reference Model vertical-axis cross-flow turbine were measured experimentally in a towing tank, to provide a comprehensive open dataset for validating numerical models. Performance was measured for a range of tip speed ratios and at multiple Reynolds numbers by varying the rotor's angular velocity and tow carriage speed, respectively. A peak power coefficient CP = 0.37 and rotor drag coefficient CD = 0.84 were observed at a tip speed ratio ?0 = 3.1. A regime of weak linear Re-dependence of the power coefficient was observed above a turbine diameter Reynolds number ReD ? 106. The effects of support strut drag on turbine performance were investigated by covering the rotor's NACA 0021 struts with cylinders. As expected, this modification drastically reduced the rotor power coefficient. Strut drag losses were also measured for the NACA 0021 and cylindrical configurations with the rotor blades removed. For ? = ?0, wake velocity was measured at 1 m (x/D = 0.93) downstream. Mean velocity, turbulence kinetic energy, and mean kinetic energy transport were compared with results from a high solidity turbine acquired with the same test apparatus. Like the high solidity case, mean vertical advection was calculated to be the largest contributor to near-wake recovery. However, overall, lower levels of streamwise wake recovery were calculated for the RM2 case-a consequence of both the relatively low solidity and tapered blades reducing blade tip vortex shedding-responsible for mean vertical advection-and lower levels of turbulence caused by higher operating tip speed ratio and therefore reduced dynamic stall. Datasets, code for processing and visualization, and a CAD model of the turbine have been made publicly available.

| S-EPMC5042560 | biostudies-literature

Global offshore wind turbine dataset.

Project description:Offshore wind farms are widely adopted by coastal countries to obtain clean and green energy; their environmental impact has gained an increasing amount of attention. Although offshore wind farm datasets are commercially available via energy industries, records of the exact spatial distribution of individual wind turbines and their construction trajectories are rather incomplete, especially at the global level. Here, we construct a global remote sensing-based offshore wind turbine (OWT) database derived from Sentinel-1 synthetic aperture radar (SAR) time-series images from 2015 to 2019. We developed a percentile-based yearly SAR image collection reduction and autoadaptive threshold algorithm in the Google Earth Engine platform to identify the spatiotemporal distribution of global OWTs. By 2019, 6,924 wind turbines were constructed in 14 coastal nations. An algorithm performance analysis and validation were performed, and the extraction accuracies exceeded 99% using an independent validation dataset. This dataset could further our understanding of the environmental impact of OWTs and support effective marine spatial planning for sustainable development.

| S-EPMC8316499 | biostudies-literature

Wind speed reductions by large-scale wind turbine deployments lower turbine efficiencies and set low generation limits.

Project description:Wind turbines generate electricity by removing kinetic energy from the atmosphere. Large numbers of wind turbines are likely to reduce wind speeds, which lowers estimates of electricity generation from what would be presumed from unaffected conditions. Here, we test how well wind power limits that account for this effect can be estimated without explicitly simulating atmospheric dynamics. We first use simulations with an atmospheric general circulation model (GCM) that explicitly simulates the effects of wind turbines to derive wind power limits (GCM estimate), and compare them to a simple approach derived from the climatological conditions without turbines [vertical kinetic energy (VKE) estimate]. On land, we find strong agreement between the VKE and GCM estimates with respect to electricity generation rates (0.32 and 0.37 We m-2) and wind speed reductions by 42 and 44%. Over ocean, the GCM estimate is about twice the VKE estimate (0.59 and 0.29 We m-2) and yet with comparable wind speed reductions (50 and 42%). We then show that this bias can be corrected by modifying the downward momentum flux to the surface. Thus, large-scale limits to wind power use can be derived from climatological conditions without explicitly simulating atmospheric dynamics. Consistent with the GCM simulations, the approach estimates that only comparatively few land areas are suitable to generate more than 1 We m-2 of electricity and that larger deployment scales are likely to reduce the expected electricity generation rate of each turbine. We conclude that these atmospheric effects are relevant for planning the future expansion of wind power.

| S-EPMC5137733 | biostudies-literature

Health Effects Related to Wind Turbine Sound: An Update.

Project description:Commissioned by the Swiss Federal Office for the Environment, an update of an earlier narrative review was prepared for the literature published between 2017 and mid-2020 about the effects of wind turbine sound on the health of local residents. Specific attention was hereby given to the health effects of low-frequency sound and infrasound. The Netherlands Institute for Public Health and the Environment and Mundonovo sound research collected the scientific literature on the effect of wind turbines on annoyance, sleep disturbance, cardiovascular disease, and metabolic effects, as well as mental and cognitive impacts. It also investigated what is known about annoyance from visual aspects of wind turbines and other non-acoustic factors, such as the local decision-making process. From the literature study, annoyance again came forward as the most important consequence of sound: the louder the sound (in dB) of wind turbines, the stronger the annoyance response was. The literature did not show that "low-frequency sound" (sound with a low pitch) results in extra annoyance on top of normal sound. Results of scientific research for other health effects are either not available or inconsistent, and we can conclude that a clear association with wind turbine related sound levels cannot be confirmed. There is evidence that long-term effects are related to the annoyance people experience. These results confirm earlier conclusions. There is increasing evidence that annoyance is lower when people can participate in the siting process. Worries of residents should be addressed in an early stage, by involving them in the process of planning and decision making.

| S-EPMC8430592 | biostudies-literature

Coaxial Layered Fiber Spinning for Wind Turbine Blade Recycling.

Project description:Plastics' long degradation time and their role in adding millions of metric tons of plastic waste to our oceans annually present an acute environmental challenge. Handling end-of-life waste from wind turbine blades (WTBs) is equally pressing. Currently, WTB waste often finds its way into landfills, emphasizing the need for recycling and sustainable solutions. Mechanical recycling of composite WTB presents an avenue for the recovery of glass fibers (GF) for repurposing as fillers or reinforcements. The resulting composite materials exhibit improved properties compared to the pure PAN polymer. Through the employment of the dry-jet wet spinning technique, we have successfully manufactured PAN/GF coaxial-layered fibers with a 0.1 wt % GF content in the middle layer. These fibers demonstrate enhanced mechanical properties and a lightweight nature. Most notably, the composite fiber demonstrates a significant 24.4% increase in strength and a 17.7% increase in modulus. These fibers hold vast potential for various industrial applications, particularly in the production of structural components (e.g., electric vehicles), contributing to enhanced performance and energy efficiency.

| S-EPMC10900510 | biostudies-literature

Wind turbine database for intelligent operation and maintenance strategies.

Project description:With the aim of helping researchers to develop intelligent operation and maintenance strategies, in this manuscript, an extensive 3-years Supervisory Control and Data Acquisition database of five Fuhrländer FL2500 2.5 MW wind turbines is presented. The database contains 312 analogous variables recorded at 5-minute intervals, from 78 different sensors. The reported values for each sensor are minimum, maximum, mean, and standard deviation. The database also contains the alarm events, indicating the system and subsystem and a small description. Finally, a set of functions to download specific subsets of the whole database is freely available in Matlab, R, and Python. To demonstrate the usefulness of this database, an illustrative example is given. In this example, different gearbox variables are selected to estimate a target variable to detect whether or not the estimate differs from the actual value provided for the sensor. By using this normality modelling approach, it is possible to detect rotor malfunction when the estimate differs from the actual measured value.

| S-EPMC10904773 | biostudies-literature

Dataset demonstrating physical properties of recycled wind turbine blade composites.

Project description:Wind turbine blades that face end-of-life recycled mechanically. The recycled material was first comminuted via a hammer-mill through a range of varying screen sizes, resinated and compressed to a final thickness to manufacture second generation composites fabricated using recycled wind turbine material and a polyurethane adhesive. Physical properties (water sorption (WA), Thickness swelling (TS)) dataset of composites made from recycled wind turbine blades presented. Dataset also presented the influence of resin level, moisture content, mill screen size and density on the physical properties of composites.

| S-EPMC6129738 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data