Dataset Information

Quantifying performance on an outdoor agility drill using foot-mounted inertial measurement units.

ABSTRACT: Running agility is required for many sports and other physical tasks that demand rapid changes in body direction. Quantifying agility skill remains a challenge because measuring rapid changes of direction and quantifying agility skill from those measurements are difficult to do in ways that replicate real task/game play situations. The objectives of this study were to define and to measure agility performance for a (five-cone) agility drill used within a military obstacle course using data harvested from two foot-mounted inertial measurement units (IMUs). Thirty-two recreational athletes ran an agility drill while wearing two IMUs secured to the tops of their athletic shoes. The recorded acceleration and angular rates yield estimates of the trajectories, velocities and accelerations of both feet as well as an estimate of the horizontal velocity of the body mass center. Four agility performance metrics were proposed and studied including: 1) agility drill time, 2) horizontal body speed, 3) foot trajectory turning radius, and 4) tangential body acceleration. Additionally, the average horizontal ground reaction during each footfall was estimated. We hypothesized that shorter agility drill performance time would be observed with small turning radii and large tangential acceleration ranges and body speeds. Kruskal-Wallis and mean rank post-hoc statistical analyses revealed that shorter agility drill performance times were observed with smaller turning radii and larger tangential acceleration ranges and body speeds, as hypothesized. Moreover, measurements revealed the strategies that distinguish high versus low performers. Relative to low performers, high performers used sharper turns, larger changes in body speed (larger tangential acceleration ranges), and shorter duration footfalls that generated larger horizontal ground reactions during the turn phases. Overall, this study advances the use of foot-mounted IMUs to quantify agility performance in contextually-relevant settings (e.g., field of play, training facilities, obstacle courses, etc.).

SUBMITTER: Zaferiou AM

PROVIDER: S-EPMC5690624 | biostudies-literature | 2017

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Quantifying performance on an outdoor agility drill using foot-mounted inertial measurement units.

Zaferiou Antonia M AM Ojeda Lauro L Cain Stephen M SM Vitali Rachel V RV Davidson Steven P SP Stirling Leia L Perkins Noel C NC

PloS one 20171116 11

Running agility is required for many sports and other physical tasks that demand rapid changes in body direction. Quantifying agility skill remains a challenge because measuring rapid changes of direction and quantifying agility skill from those measurements are difficult to do in ways that replicate real task/game play situations. The objectives of this study were to define and to measure agility performance for a (five-cone) agility drill used within a military obstacle course using data harve ...[more]

PMID: 29145504

Similar Datasets

Project description:AimsThe aims of the study were two-fold: i) examine the validity and reliability of high-speed kicking actions using foot-mounted inertial measurement unit's (IMU), ii) quantify soccer players within-microcycle and inter-positional differences in both the frequency and speed of technical actions.MethodsDuring the in-season phase (25 weeks) of the UK domestic season, 21 professional soccer player ball releases, high-speed ball releases and ball release index were analysed. Pearson product-moment correlation coefficient and confidence intervals were used to determine the validity between the systems, whilst a general linear mixed model analysis approach was used to establish estimated marginal mean values for total ball releases, high-speed ball releases and ball release index.ResultsGood concurrent validity was observed for ball release velocity and high-speed kicks against a high-speed camera (r2- 0.96, CI 0.93-0.98). Ball releases, high-speed ball releases and ball release index all showed main effects for fixture proximity (p>0.001), playing positions (p>0.001) and across different training categories (p>0.001). The greatest high-speed ball releases were observed on a match-day (MD)+1 (17.6 ± 11.9; CI- 16.2 to 19) and MD-2 (16.8 ± 15; CI- 14.9 to 18.7), with MD+1 exhibiting the highest number of ball releases (161.1 ± 51.2; CI- 155.0 to 167.2) and ball release index (145.5 ± 45.2; CI- 140.1 to 150.9) across all fixture proximities. Possessions (0.3 ± 0.9; CI- 0.3 to 0.4) and small-sided games (1.4 ± 1.6; CI- 1.4 to 1.5), had the lowest values for high-speed ball releases with technical (6.1 ± 7.2; CI- 5.7 to 6.6) and tactical (10.0 ± 10.5; CI- 6.9 to 13.1) drills showing the largest high-speed ball releases.ConclusionsThe present study provides novel information regarding the quantification of technical actions of professional soccer players. Insights into absolute and relative frequency and intensity of releases in different drill types, provide practitioners with valuable information on technical outputs that can be manipulated during the process of planning training programmes to produce desired outcomes. Both volume and speed of ball release actions should be measured, when monitoring the technical actions in training according to fixture proximity, drill type and player position to permit enhanced training prescription.

Project description:BackgroundWalking patterns can provide important indications of a person's health status and be beneficial in the early diagnosis of individuals with a potential walking disorder. For appropriate gait analysis, it is critical that natural functional walking characteristics are captured, rather than those experienced in artificial or observed settings. To better understand the extent to which setting influences gait patterns, and particularly whether observation plays a varying role on subjects of different ages, the current study investigates to what extent people walk differently in lab versus real-world environments and whether age dependencies exist.MethodsThe walking patterns of 20 young and 20 elderly healthy subjects were recorded with five wearable inertial measurement units (ZurichMOVE sensors) attached to both ankles, both wrists and the chest. An automated detection process based on dynamic time warping was developed to efficiently identify the relevant sequences. From the ZurichMOVE recordings, 15 spatio-temporal gait parameters were extracted, analyzed and compared between motion patterns captured in a controlled lab environment (10 m walking test) and the non-controlled ecologically valid real-world environment (72 h recording) in both groups.ResultsSeveral parameters (Cluster A) showed significant differences between the two environments for both groups, including an increased outward foot rotation, step width, number of steps per 180° turn, stance to swing ratio, and cycle time deviation in the real-world. A number of parameters (Cluster B) showed only significant differences between the two environments for elderly subjects, including a decreased gait velocity (p = 0.0072), decreased cadence (p = 0.0051) and increased cycle time (p = 0.0051) in real-world settings. Importantly, the real-world environment increased the differences in several parameters between the young and elderly groups.ConclusionElderly test subjects walked differently in controlled lab settings compared to their real-world environments, which indicates the need to better understand natural walking patterns under ecologically valid conditions before clinically relevant conclusions can be drawn on a subject's functional status. Moreover, the greater inter-group differences in real-world environments seem promising regarding the sensitive identification of subjects with indications of a walking disorder.

Dataset Information

Quantifying performance on an outdoor agility drill using foot-mounted inertial measurement units.

Publications

Quantifying performance on an outdoor agility drill using foot-mounted inertial measurement units.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets