Browse
Submit Data
Databases
API
Help

Dataset Information

30 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Electrochemical performance and interfacial properties of Li-metal in lithium bis(fluorosulfonyl)imide based electrolytes.

ABSTRACT: Successful usage of lithium metal as the negative electrode or anode in rechargeable batteries can be an important step to increase the energy density of lithium batteries. Performance of lithium metal in a relatively promising electrolyte solution composed of lithium bis(fluorosulfonyl)imide (LiN(SO2F)2; LiFSI) salt dissolved in 1,2-dimethoxyethane (DME) is here studied. The influence of the concentration of the electrolyte salt -1 M or 4?M LiFSI- is investigated by varying important electrochemical parameters such as applied current density and plating capacity. X-ray photoelectron spectroscopy analysis as a surface sensitive technique is here used to analyze that how the composition of the solid electrolyte interphase varies with the salt concentration and with the number of cycles.

SUBMITTER: Younesi R

PROVIDER: S-EPMC5698312 | biostudies-literature | 2017 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Electrochemical performance and interfacial properties of Li-metal in lithium bis(fluorosulfonyl)imide based electrolytes.

Younesi Reza R Bardé Fanny F

Scientific reports 20171121 1

Successful usage of lithium metal as the negative electrode or anode in rechargeable batteries can be an important step to increase the energy density of lithium batteries. Performance of lithium metal in a relatively promising electrolyte solution composed of lithium bis(fluorosulfonyl)imide (LiN(SO<sub>2</sub>F)<sub>2</sub>; LiFSI) salt dissolved in 1,2-dimethoxyethane (DME) is here studied. The influence of the concentration of the electrolyte salt -1 M or 4 M LiFSI- is investigated by varyin ...[more]

PMID: 29162891

Similar Datasets

Temperature-Dependent Electrochemical Stability Window of Bis(trifluoromethanesulfonyl)imide and Bis(fluorosulfonyl)imide Anion Based Ionic Liquids.

Project description:The electrochemical stability of 22 commercially available hydrophobic ionic liquids was measured at different temperatures (288.15, 298.15, 313.15, 333.15 and 358.15 K), to systematically investigate ionic liquids towards electrolytes for supercapacitors in harsh weather conditions. Bis(trifluoromethanesulfonyl)imide and bis(fluorosulfonyl)imide anions in combination with 1-Butyl-1-methylpyrrolidinium, 1-Ethyl-3-methylimidazolium, N-Ethyl-N, N-dimethyl-N(2methoxyethyl)ammonium, 1-Methyl-1-(2-methoxyethyl)pyrrolidinium, N-Pentyl-N-methylpyrrolidinium, N, N-Diethyl-N-methyl-N-propylammonium, N, N-Dimethyl-N-ethyl-N-benzyl ammonium, N, N-Dimethyl-N-Ethyl-N-phenylethylammonium, N-Butyl-N-methylpiperidinium, 1-Methyl-1-propylpiperidinium, N-Tributyl-N-methylammonium, N-Trimethyl-N-butylammonium, N-Trimethyl-N-butylammonium, N-Trimethyl-N-propylammonium, N-Propyl-N-methylpyrrolidinium cations were selected for the study. Linear regression with a numerical model was used in combination with voltammetry experiments to deduce the temperature sensitivity of both anodic and cathodic potential limits (defining the electrochemical stability window), in addition to extrapolating results to 283.15 and 363.15 K. We evaluated the influence of the cations, anions, and the presence of functional groups on the observed electrochemical stability window which ranged from 4.1 to 6.1 V.

| S-EPMC9247390 | biostudies-literature

Solid-state polymer electrolytes for high-performance lithium metal batteries.

Project description:Electrochemical cells based on alkali metal anodes are receiving intensive scientific interest as potentially transformative technology platforms for electrical energy storage. Chemical, morphological, mechanical and hydrodynamic instabilities at the metal anode produce uneven metal electrodeposition and poor anode reversibility, which, are among the many known challenges that limit progress. Here, we report that solid-state electrolytes based on crosslinked polymer networks can address all of these challenges in cells based on lithium metal anodes. By means of transport and electrochemical analyses, we show that manipulating thermodynamic interactions between polymer segments covalently anchored in the network and "free" segments belonging to an oligomeric electrolyte hosted in the network pores, one can facilely create hybrid electrolytes that simultaneously exhibit liquid-like barriers to ion transport and solid-like resistance to morphological and hydrodynamic instability.

| S-EPMC6765010 | biostudies-literature

Wetting Phenomena and their Effect on the Electrochemical Performance of Surface-Tailored Lithium Metal Electrodes in Contact with Cross-linked Polymeric Electrolytes.

Project description:Li metal batteries (LMBs) containing cross-linked polymer electrolytes (PEs) are auspicious candidates for next-generation batteries. However, the wetting behavior of PEs on uneven Li metal surfaces has been neglected in most studies. Herein, it is shown that microscale defect sites with curved edges play an important role in a wettability-dependent electrodeposition. The wettability and the viscoelastic properties of PEs are correlated, and the impact of wettability on the nucleation and diffusion near the Li|PE interface is distinguished. It is found that the curvature of the edges is a key factor for the investigation of wetting phenomena. The appearance of microscale defects and phase separation are identified as main causes for erratic nucleation. It is emphasized that the implementation of stable and consistent long-term cycling performance of LMBs using PEs requires a deeper understanding of the "soft-solid"-solid contact between PEs and inherently rough Li metal surfaces.

| S-EPMC7540057 | biostudies-literature

Comparative performance of ex situ artificial solid electrolyte interphases for Li metal batteries with liquid electrolytes.

Project description:The design of artificial solid electrolyte interphases (ASEIs) that overcome the traditional instability of Li metal anodes can accelerate the deployment of high-energy Li metal batteries (LMBs). By building the ASEI ex situ, its structure and composition is finely tuned to obtain a coating layer that regulates Li electrodeposition, while containing morphology and volumetric changes at the electrode. This review analyzes the structure-performance relationship of several organic, inorganic, and hybrid materials used as ASEIs in academic and industrial research. The electrochemical performance of ASEI-coated electrodes in symmetric and full cells was compared to identify the ASEI and cell designs that enabled to approach practical targets for high-energy LMBs. The comparative performance and the examined relation between ASEI thickness and cell-level specific energy emphasize the necessity of employing testing conditions aligned with practical battery systems.

| S-EPMC8184660 | biostudies-literature

A Crosslinked Polyethyleneglycol Solid Electrolyte Dissolving Lithium Bis(trifluoromethylsulfonyl)imide for Rechargeable Lithium Batteries.

Project description:Replacing liquid electrolytes with solid ones can provide advantages in safety, and all-solid-state batteries with solid electrolytes are proposed to solve the issue of the formation of lithium dendrites. In this study, a crosslinked polymer composite solid electrolyte was presented, which enabled the construction of lithium batteries with outstanding electrochemical behavior over long-term cycling. The crosslinked polymeric host was synthesized through polymerization of the terminal amines of O,O-bis(2-aminopropyl) polypropylene glycol-block-polyethylene glycol-block-polypropylene glycol and terminal epoxy groups of bisphenol A diglycidyl ether at 90 °C and provided an amorphous matrix for Li+ dissolution. This composite solid electrolyte containing Li+ salt and garnet filler exhibited high flexibility, which supported the formation of favorable interfaces with the active materials, and possessed enough mechanical strength to suppress the penetration of lithium dendrites. Ionic conductivities higher than 5.0×10-4 S cm-1 above 45 °C were obtained as well as a wide electrochemical stability window (>4.51 V vs. Li/Li+ ) and a high Li+ diffusion coefficient (≈16.6×10-13 m2 s-1 ). High cycling stability (>500 cycles or 1000 h) was demonstrated.

| S-EPMC6856689 | biostudies-literature

Interfacial self-healing polymer electrolytes for long-cycle solid-state lithium-sulfur batteries.

Project description:Coupling high-capacity cathode and Li-anode with solid-state electrolyte has been demonstrated as an effective strategy for increasing the energy densities and safety of rechargeable batteries. However, the limited ion conductivity, the large interfacial resistance, and unconstrained Li-dendrite growth hinder the application of solid-state Li-metal batteries. Here, a poly(ether-urethane)-based solid-state polymer electrolyte with self-healing capability is designed to reduce the interfacial resistance and provides a high-performance solid-state Li-metal battery. With its dynamic covalent disulfide bonds and hydrogen bonds, the proposed solid-state polymer electrolyte exhibits excellent interfacial self-healing ability and maintains good interfacial contact. Full cells are assembled with the two integrated electrodes/electrolytes. As a result, the Li||Li symmetric cells exhibit stable long-term cycling for more than 6000 h, and the solid-state Li-S battery shows a prolonged cycling life of 700 cycles at 0.3 C. The use of ultrasound imaging technology shows that the interfacial contact of the integrated structure is much better than those of traditional laminated structure. This work provides an interesting interfacial dual-integrated strategy for designing high-performance solid-state Li-metal batteries.

| S-EPMC10774406 | biostudies-literature

Double-Layer Solid Composite Electrolytes Enabling Improved Room-Temperature Cycling Performance for High-Voltage Lithium Metal Batteries.

Project description:The development of solid-state electrolytes (SSEs) for high energy density lithium metal batteries (LMBs) usually needs to take into account of the interfacial compatibility against lithium metal and the electrolyte stability suitable for a high-potential cathode. In this study, through a facile two-step coating process, novel double-layer solid composite electrolytes (SCEs) with Janus characteristics are customized for the high-voltage LMBs with improved room-temperature cycling performance. Among which, high-voltage resistant poly(vinylidene fluoride) (PVDF) is adopted here for the construction of an electrolyte layer facing the cathode, while the other layer against the lithium anode is composed of the polymer matrix of poly(ethylene oxide) (PEO) blended with PVDF to obtain a lithium metal-friendly interface. With the further incorporation of Laponite clay, the PVDF/(PEO+PVDF)-L SCEs not only exhibit improved mechanical properties, but also achieve a highly increased ionic conductivity (5.2 × 10-4 S cm-1) and lithium ion migration number (0.471) at room temperature. The assembled NCM523|PVDF/(PEO+PVDF)-L SCEs|Li cells thus are able to deliver the initial discharge capacity of 153.9 mAh g-1 with 80.8% capacity retention after 200 cycles at 0.3 C. Such easily manufactured double-layer SCEs capable of operating steadily at room temperature provide a competitive electrolyte option for high-voltage solid-state LMBs.

| S-EPMC8757445 | biostudies-literature

A new sealed lithium-peroxide battery with a co-doped Li2O cathode in a superconcentrated lithium bis(fluorosulfonyl)amide electrolyte.

Project description:We propose a new sealed battery operating on a redox reaction between an oxide (O(2-)) and a peroxide (O2(2-)) with its theoretical specific energy of 2570 Wh kg(-1) (897 mAh g(-1), 2.87 V) and demonstrate that a Co-doped Li2O cathode exhibits a reversible capacity over 190 mAh g(-1), a high rate capability, and a good cyclability with a superconcentrated lithium bis(fluorosulfonyl)amide electrolyte in acetonitrile. The reversible capacity is largely dominated by the O(2-)/O2(2-) redox reaction between oxide and peroxide with some contribution of the Co(2+)/Co(3+) redox reaction.

| S-EPMC4097343 | biostudies-literature

Fluorinated Boron-Based Anions for Higher Voltage Li Metal Battery Electrolytes.

Project description:Lithium metal batteries (LMBs) require an electrolyte with high ionic conductivity as well as high thermal and electrochemical stability that can maintain a stable solid electrolyte interphase (SEI) layer on the lithium metal anode surface. The borate anions tetrakis(trifluoromethyl)borate ([B(CF3)4]-), pentafluoroethyltrifluoroborate ([(C2F5)BF3]-), and pentafluoroethyldifluorocyanoborate ([(C2F5)BF2(CN)]-) have shown excellent physicochemical properties and electrochemical stability windows; however, the suitability of these anions as high-voltage LMB electrolytes components that can stabilise the Li anode is yet to be determined. In this work, density functional theory calculations show high reductive stability limits and low anion-cation interaction strengths for Li[B(CF3)4], Li[(C2F5)BF3], and Li[(C2F5)BF2(CN)] that surpass popular sulfonamide salts. Specifically, Li[B(CF3)4] has a calculated oxidative stability limit of 7.12 V vs. Li+/Li0 which is significantly higher than the other borate and sulfonamide salts (≤6.41 V vs. Li+/Li0). Using ab initio molecular dynamics simulations, this study is the first to show that these borate anions can form an advantageous LiF-rich SEI layer on the Li anode at room (298 K) and elevated (358 K) temperatures. The interaction of the borate anions, particularly [B(CF3)4]-, with the Li+ and Li anode, suggests they are suitable inclusions in high-voltage LMB electrolytes that can stabilise the Li anode surface and provide enhanced ionic conductivity.

| S-EPMC8466916 | biostudies-literature

Interfacial architecture for extra Li? storage in all-solid-state lithium batteries.

Project description:The performance of nanocomposite electrodes prepared by controlled ball-milling of TiS? and a Li?S-P?S? solid electrolyte (SE) for all-solid-state lithium batteries is investigated, focusing on the evolution of the microstructure. Compared to the manually mixed electrodes, the ball-milled electrodes exhibit abnormally increased first-charge capacities of 416 mA h g(-1) and 837 mA h g(-1) in the voltage ranges 1.5-3.0 V and 1.0-3.0 V, respectively, at 50 mA g(-1) and 30°C. The ball-milled electrodes also show excellent capacity retention of 95% in the 1.5-3.0 V range after 60 cycles as compared to the manually mixed electrodes. More importantly, a variety of characterization techniques show that the origin of the extra Li(+) storage is associated with an amorphous Li-Ti-P-S phase formed during the controlled ball-milling process.

| S-EPMC4085631 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data