Comparison of PIXE and XRF in the analysis of silver denarii of the early Piast.
Ontology highlight
ABSTRACT:
SUBMITTER: Lekki J
PROVIDER: S-EPMC5707234 | biostudies-literature | 2017
REPOSITORIES: biostudies-literature
Publications
Comparison of PIXE and XRF in the analysis of silver denarii of the early Piast.
Lekki Janusz J Matosz Marta M Paluszkiewicz Czesława C Pięta Ewa E Pieprzyca Tomasz T Szklarz Zbigniew Z Del Hoyo Meléndez Julio M JM
Journal of radioanalytical and nuclear chemistry 20171020 3
The collection of denarii from the time of development of a Polish medieval state was studied using the proton induced X-ray emission spectroscopy. The major elements detected for these denarii are Ag and Cu, while minor elements such as Pb, Fe, Au, Bi, and Zn may also be present. The aim of the study was to cross-compare the results with a previous micro-X-ray fluorescence data and to perform a better quantification of the denarii elemental composition, especially for trace elements, providing ...[more]
Similar Datasets
Project description:Oral lichen planus (OLP) and oral lichenoid contact lesions (OLCL) are chronic inflammatory mucocutaneous reactions with a risk of malignant transformation that alter the epithelium. OLP and OLCL have similar clinical and histopathological features and it is difficult to distinguish one from the other. Metallic restorations are suspected to generate OLCLs. Trace metal analysis of OLCL specimens may facilitate the discrimination of symptoms and identification of causative metallic restorations. The purpose of this study was to assess OLCL tissue samples for the prevalence of metallic elements derived from dental restorations, and to discriminate OLCL from OLP by using synchrotron radiation-excited X-ray fluorescence analysis (SR-XRF), particle-induced X-ray emission (PIXE), and X-ray absorption fine structure (XAFS). Typical elements of dental materials were detected in the OLCL, whereas no obvious element accumulation was detected in OLP and negative control specimens. The origin of the detected metallic elements was presumed to be dental alloys through erosion. Therefore, our findings support the feasibility of providing supporting information to distinguish OLCL from OLP by using elemental analysis.
| S-EPMC4471725 | biostudies-literature
Project description:Field portable X-ray fluorescence (FP-XRF) has tremendous potential in geoenvironmental engineering as a qualitative assessment tool. Identification of the elevated concentrations of the selected elements (Cr, Cu, Mn, Ni, Pb, and Zn) in various geomaterials like soil-like-material (SLM), incinerated bottom ash (IBA), construction and demolition waste (CDW), zinc tailings (ZT) and fly ash (FA) was performed by FP-XRF and compared with the local soil-Delhi silt. Comparably higher concentrations (mg/kg) of Cr (401.0), Cu (499.0), Pb (532.0), Zn (608.0) in SLM, Cr (195.0), Cu (419.0), Ni (93.0), Pb (931.0), Zn (771.0) in IBA and Cr (195.0), Cu (4000.0), Pb (671.0), Zn (7122.0) in ZT were observed. CDW and FA showed similar concentrations range as in local soils. FP-XRF was also used in-situ on local soil at 11 sites to examine its ability to identify the elements with significant variations in concentrations. The results showed high variability in Cl and S concentration values across the 11 sites attributed to the changing moisture content and dissolved salts. The concentration range for the remaining elements were similar at all sites. The verification of the detected elements through visual inspection of the spectrum was also carried out.
| S-EPMC9122228 | biostudies-literature
Project description:Among the existing elemental characterization techniques, particle-induced x-ray emission (PIXE) and energy-dispersive x-ray (EDX) spectroscopy are two of the most widely used in different scientific and technological fields. Here, we present the first quantitative laser-driven PIXE and laser-driven EDX experimental investigation performed at the Centro de Láseres Pulsados in Salamanca. Thanks to their potential for compactness and portability, laser-driven particle sources are very appealing for materials science applications, especially for materials analysis techniques. We demonstrate the possibility to exploit the x-ray signal produced by the co-irradiation with both electrons and protons to identify the elements in the sample. We show that, using the proton beam only, we can successfully obtain quantitative information about the sample structure through laser-driven PIXE analysis. These results pave the way toward the development of a compact and multifunctional apparatus for the elemental analysis of materials based on a laser-driven particle source.
| S-EPMC7810378 | biostudies-literature
Project description:Cyanobacteria perceive and move (phototax) in response to blue light. In this study, we demonstrate that the PixD blue light-sensing using FAD (BLUF) photoreceptor that governs this response undergoes changes in oligomerization state upon illumination. Under dark conditions we observed that PixD forms a large molecular weight complex with another protein called PixE. Stoicheometric analyses, coupled with sedimentation equilibrium and size exclusion chromatography, demonstrates that PixE drives aggregation of PixD dimers into a stable PixD(10)-PixE(5) complex under dark conditions. Illumination of a flavin chromophore in PixD destabilizes the PixD(10)-PixE(5) complex into monomers of PixE and dimers of PixD. A crystallographic structure of PixD, coupled with Gibbs free energy calculation between interacting faces of PixD, lends to a model in which a light induces a conformational change in a critical PixD-interfacing loop that results in destabilization of the PixD(10)-PixE(5) complex.
| S-EPMC2575306 | biostudies-literature
Project description:The implementation of analytical techniques able to certify food quality and origin in a fast and non-destructive way is becoming a widespread need in the agri-food sector. Among the physical non-destructive techniques, X-ray fluorescence (XRF) spectrometry is often used to analyze the elemental composition of biological samples. In this study, X-ray fluorescence (XRF) elemental profiles were measured on tomato samples belonging to different geographical areas in Sicily (Italy). The purpose of this investigation was aiming to establish a protocol for in-situ measurement and analysis able to provide quality assessment and traceability of PGI agri-food products, specifically sustaining health safety and self qualifying bio-chemical signature. In detail, sampling was performed in one of the most tomato productive area of south-eastern Sicily (Pachino district), characterised by a relative higher amount of Organic Carbon and Cation Exchange Capacity, and compared with samples from other growing areas of Sicily, falling in Ragusa province and Mt. Etna region. Experimental data were analyzed in the framework of multivariate analysis by using principal component analysis and further validated by discriminant analysis. The results show the presence of specific elemental signatures associated to several characterizing elements. This methodology establishes the possibility to disentangle a clear fingerprint pattern associated to the geographical origin of an agri-food product.
| S-EPMC10447457 | biostudies-literature
Project description:X-Ray Fluorescence (XRF) scanning is a widespread technique of high importance and impact since it provides chemical composition maps crucial for several scientific investigations. There are continuous requirements for larger, faster and highly resolved acquisitions in order to study complex structures. Among the scientific applications that benefit from it, some of them, such as wide scale brain imaging, are prohibitively difficult due to time constraints. However, typically the overall XRF imaging performance is improving through technological progress on XRF detectors and X-ray sources. This paper suggests an additional approach where XRF scanning is performed in a sparse way by skipping specific points or by varying dynamically acquisition time or other scan settings in a conditional manner. This paves the way for Compressive Sensing in XRF scans where data are acquired in a reduced manner allowing for challenging experiments, currently not feasible with the traditional scanning strategies. A series of different compressive sensing strategies for dynamic scans are presented here. A proof of principle experiment was performed at the TwinMic beamline of Elettra synchrotron. The outcome demonstrates the potential of Compressive Sensing for dynamic scans, suggesting its use in challenging scientific experiments while proposing a technical solution for beamline acquisition software.
| S-EPMC7305138 | biostudies-literature
Project description:Since honeybee pollen is considered a "perfectly complete food" and is characterized by many beneficial properties (anti-inflammatory, antioxidant, anti-bacterial, etc.), it has begun to be used for therapeutic purposes. Consequently, there is a high need to develop methods for controlling its composition. A thorough bee pollen analysis can be very informative regarding its safety for consumption, the variability of its composition, its biogeographical origin, or harvest date. Therefore, in this study, two reliable and non-destructive spectroscopy methods, i.e., ED-XRF and ATR-FTIR, are proposed as a fast approach to characterize bee pollen. The collected samples were derived from apiaries located in west-central Poland. Additionally, some commercially available samples were analyzed. The applied methodology was optimized and combined with sophisticated chemometric tools. Data derived from IR analyses were also subjected to two-dimensional correlation spectroscopy. The developed ED-XRF method allowed the reliable quantification of eight macro- and micro-nutrients, while organic components were characterized by IR spectroscopy. Principal component analysis, cluster analysis, and obtained synchronous and asynchronous maps allowed the study of component changes occurring dependently on the date and location of harvest. The proposed approach proved to be an excellent tool to monitor the variability of the inorganic and organic content of bee pollen.
| S-EPMC8512728 | biostudies-literature
Project description:Detecting clandestine, intermittent release of heavy metal pollution into natural and man-made water ways is challenging. Conventional chemical methods are both labor intensive and expensive. A recent approach combining ion-exchange resins with the capabilities of X-ray fluorescence core scanners (XRF-CS) therefore is of great interest. In short, ion-exchange resin is deployed in the water using small sachets, the resin is then collected, dried, filled into sample holders and scanned using XRF-CS. Ion-exchange resins take up heavy metals in proportion to the concentration in the ambient water, with a correlation coefficient (R2) between concentration and XRF-CS counts better than 0.96 for most elements. However, a number of parameters influence the measurements. Different drying methods introduce differences in the XRF counts because of lattice bound water, resin shrinkage, and disaggregation of the resin particles. Furthermore, the newly developed sample carrier, which was constructed using 3D printed polymers, contains trace amounts of elements that may influence the sample measurements through edge effects and secondary fluorescence. In the tested sample carrier materials, substantial levels of Cr, Fe, Co, and Zn were detected, while Ca, Ti, Ni, Cu, Ga showed variable levels. Ba, Tl and Bi show very low levels, and Pb is only of importance in the PLA carrier. It is therefore necessary to streamline the analysis-process to ensure that the variations in sample treatment and drying and filling methods are minimized. It is also recommended that only spectra from the center of the compartments are used for the evaluation to avoid edge effects caused by secondary fluorescence of metals in the compartment walls. Although the technique of using ion-exchange resin sachets and XRF-CS analysis is only semi-quantitative, it is a cost effective and fast way to monitor large areas for environmental pollution, and the new sample carrier greatly contributes to make the process faster and less error prone.
| S-EPMC8536750 | biostudies-literature
Project description:The aim of this work is to investigate the feasibility of ion beam analysis techniques for monitoring swift heavy ion track formation. First, the use of the in situ Rutherford backscattering spectrometry in channeling mode to observe damage build-up in quartz SiO₂ after MeV heavy ion irradiation is demonstrated. Second, new results of the in situ grazing incidence time-of-flight elastic recoil detection analysis used for monitoring the surface elemental composition during ion tracks formation in various materials are presented. Ion tracks were found on SrTiO₃, quartz SiO₂, a-SiO₂, and muscovite mica surfaces by atomic force microscopy, but in contrast to our previous studies on GaN and TiO₂, surface stoichiometry remained unchanged. Third, the usability of high resolution particle induced X-ray spectroscopy for observation of electronic dynamics during early stages of ion track formation is shown.
| S-EPMC5615696 | biostudies-literature
Project description:This study introduces the use of macroscopic X-ray fluorescence (MA-XRF) for the detection, classification and imaging of forensic traces over large object areas such as entire pieces of clothing and wall paneling. MA-XRF was sufficiently sensitive and selective to detect human biological traces like blood, semen, saliva, sweat and urine on fabric on the basis of Fe, Zn, K, Cl and Ca elemental signatures. With MA-XRF a new chemical contrast is introduced for human stain detection and this can provide a valuable alternative when the evidence item is challenging for conventional techniques. MA-XRF was also successfully employed for the chemical imaging and classification of gunshot residues (GSR). The full and non-invasive elemental mapping (Pb, Ba, Sr, K and Cl) of intact pieces of clothing allows for a detailed shooting incident reconstruction linking firearms and ammunition to point of impact and providing information on the shooting angle. In high resolution mode MA-XRF can even be used to provide information on the shooting order of different ammunition types. Finally, by using the surface penetration of X-rays we demonstrate that the lead signature of a bullet impact can be easily detected even if covered by multiple layers of wall paint or human blood.
| S-EPMC5678136 | biostudies-literature