Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Novel Methods for Prevention of Hydrogen Embrittlement in Iron.

ABSTRACT: Iron is the most widely used metal in the world. However, hydrogen embrittlement in steels-iron based alloys-is an important issue related to the safety of our infrastructure, such as railroads and bridges. Therefore, the prevention of hydrogen embrittlement in steels is necessary. In the present study, we demonstrate two novel methods for the prevention of hydrogen embrittlement in iron: one involves the low-energy implantation of helium, which is usually an element harmful to metals, into iron, the other is inducing damage to the iron surface by ion irradiation. In general, irradiation with high-energy particles leads to metal brittleness. In the former method, the driving force for hydrogen embrittlement in iron is weakened, in the latter method, hydrogen diffusion in iron is prevented because of trapping of hydrogen atoms in the vacancies produced by the irradiation. As a result, hydrogen embrittlement in iron was suppressed by both methods.

SUBMITTER: Xu Q

PROVIDER: S-EPMC5717234 | biostudies-literature | 2017 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Novel Methods for Prevention of Hydrogen Embrittlement in Iron.

Xu Q Q Zhang J J

Scientific reports 20171205 1

Iron is the most widely used metal in the world. However, hydrogen embrittlement in steels-iron based alloys-is an important issue related to the safety of our infrastructure, such as railroads and bridges. Therefore, the prevention of hydrogen embrittlement in steels is necessary. In the present study, we demonstrate two novel methods for the prevention of hydrogen embrittlement in iron: one involves the low-energy implantation of helium, which is usually an element harmful to metals, into iron ...[more]

PMID: 29208931

Similar Datasets

Hydrocarbon Lubricants Can Control Hydrogen Embrittlement.

Project description:While it is well known that during RCF tests the formation of nascent catalytic sites on the wear track can break down hydrocarbon molecules to release atomic hydrogen, the potential of the hydrogen environment in fuel cells to hydrocrack the hydrocarbon lubricant in high pressure rolling contacts has so far been ignored. Here we investigate for the first time the ability of the hydrogen environment to generate a chemical tribofilm on the wear track most likely through lubricant hydrocracking, as compared with argon and air environments. Despite the ability of the hydrogen environment to generate a notably larger amount of atomic hydrogen, the chemical tribofilm significantly prevents the formation of atomic hydrogen and its subsequent diffusion through the lattice of steel rolling element bearings. This is of great importance in the lubrication of hydrogen technology and the prevention of Hydrogen embrittlement (HE). An investigation into the prospects of high energy micro-computed-tomography (Micro-CT) as a non-destructive technique for sub-surface damage characterisation in RCF was comparatively performed alongside traditional sectioning methods.

| S-EPMC6987115 | biostudies-literature

Hydrogen embrittlement in metallic nanowires.

Project description:Although hydrogen embrittlement has been observed and extensively studied in a wide variety of metals and alloys, there still exist controversies over the underlying mechanisms and a fundamental understanding of hydrogen embrittlement in nanostructures is almost non-existent. Here we use metallic nanowires (NWs) as a platform to study hydrogen embrittlement in nanostructures where deformation and failure are dominated by dislocation nucleation. Based on quantitative in-situ transmission electron microscopy nanomechanical testing and molecular dynamics simulations, we report enhanced yield strength and a transition in failure mechanism from distributed plasticity to localized necking in penta-twinned Ag NWs due to the presence of surface-adsorbed hydrogen. In-situ stress relaxation experiments and simulations reveal that the observed embrittlement in metallic nanowires is governed by the hydrogen-induced suppression of dislocation nucleation at the free surface of NWs.

| S-EPMC6494841 | biostudies-other

Hydrogen trapping and embrittlement in high-strength Al alloys.

Project description:Ever more stringent regulations on greenhouse gas emissions from transportation motivate efforts to revisit materials used for vehicles1. High-strength aluminium alloys often used in aircrafts could help reduce the weight of automobiles, but are susceptible to environmental degradation2,3. Hydrogen 'embrittlement' is often indicated as the main culprit4; however, the exact mechanisms underpinning failure are not precisely known: atomic-scale analysis of H inside an alloy remains a challenge, and this prevents deploying alloy design strategies to enhance the durability of the materials. Here we performed near-atomic-scale analysis of H trapped in second-phase particles and at grain boundaries in a high-strength 7xxx Al alloy. We used these observations to guide atomistic ab initio calculations, which show that the co-segregation of alloying elements and H favours grain boundary decohesion, and the strong partitioning of H into the second-phase particles removes solute H from the matrix, hence preventing H embrittlement. Our insights further advance the mechanistic understanding of H-assisted embrittlement in Al alloys, emphasizing the role of H traps in minimizing cracking and guiding new alloy design.

| S-EPMC8850197 | biostudies-literature

Study on Temper Embrittlement and Hydrogen Embrittlement of a Hydrogenation Reactor by Small Punch Test.

Project description:The study on temper embrittlement and hydrogen embrittlement of a test block from a 3Cr1Mo1/4V hydrogenation reactor after ten years of service was carried out by small punch test (SPT) at different temperatures. The SPT fracture energy Esp (derived from integrating the load-displacement curve) divided by the maximum load (Fm) of SPT was used to fit the Esp/Fm versus-temperature curve to determine the energy transition temperature (Tsp) which corresponded to the ductile-brittle transition temperature of the Charpy impact test. The results indicated that the ratio of Esp/Fm could better represent the energy of transition in SPT compared with Esp. The ductile-to-brittle transition temperature of the four different types of materials was measured using the hydrogen charging test by SPT. These four types of materials included the base metal and the weld metal in the as-received state, and the base metal and the weld metal in the de-embrittled state. The results showed that there was a degree of temper embrittlement in the base metal and the weld metal after ten years of service at 390 °C. The specimens became slightly more brittle but this was not obvious after hydrogen charging. Because the toughness of the material of the hydrogenation reactor was very good, the flat samples of SPT could not characterize the energy transition temperature within the liquid nitrogen temperature. Additionally, there was no synergetic effect of temper embrittlement and hydrogen embrittlement found in 3Cr1Mo1/4V steel.

| S-EPMC5554052 | biostudies-other

A strong and ductile medium-entropy alloy resists hydrogen embrittlement and corrosion.

Project description:Strong and ductile materials that have high resistance to corrosion and hydrogen embrittlement are rare and yet essential for realizing safety-critical energy infrastructures, hydrogen-based industries, and transportation solutions. Here we report how we reconcile these constraints in the form of a strong and ductile CoNiV medium-entropy alloy with face-centered cubic structure. It shows high resistance to hydrogen embrittlement at ambient temperature at a strain rate of 10-4 s-1, due to its low hydrogen diffusivity and the deformation twinning that impedes crack propagation. Moreover, a dense oxide film formed on the alloy's surface reduces the hydrogen uptake rate, and provides high corrosion resistance in dilute sulfuric acid with a corrosion current density below 7 μA cm-2. The combination of load carrying capacity and resistance to harsh environmental conditions may qualify this multi-component alloy as a potential candidate material for sustainable and safe infrastructures and devices.

| S-EPMC7299985 | biostudies-literature

Alloy and composition dependence of hydrogen embrittlement susceptibility in high-strength steel fasteners.

Project description:High-strength steel fasteners characterized by tensile strengths above 1100 MPa are often used in critical applications where a failure can have catastrophic consequences. Preventing hydrogen embrittlement (HE) failure is a fundamental concern implicating the entire fastener supply chain. Research is typically conducted under idealized conditions that cannot be translated into know-how prescribed in fastener industry standards and practices. Additionally, inconsistencies and even contradictions in fastener industry standards have led to much confusion and many preventable or misdiagnosed fastener failures. HE susceptibility is a function of the material condition, which is comprehensively described by the metallurgical and mechanical properties. Material strength has a first-order effect on HE susceptibility, which increases significantly above 1200 MPa and is characterized by a ductile--brittle transition. For a given concentration of hydrogen and at equal strength, the critical strength above which the ductile-brittle transition begins can vary due to second-order effects of chemistry, tempering temperature and sub-microstructure. Additionally, non-homogeneity of the metallurgical structure resulting from poorly controlled heat treatment, impurities and non-metallic inclusions can increase HE susceptibility of steel in ways that are measurable but unpredictable. Below 1200 MPa, non-conforming quality is often the root cause of real-life failures.This article is part of the themed issue 'The challenges of hydrogen and metals'.

| S-EPMC5468724 | biostudies-literature

Hydrogen embrittlement through the formation of low-energy dislocation nanostructures in nanoprecipitation-strengthened steels.

Project description:Hydrogen embrittlement is shown to proceed through a previously unidentified mechanism. Upon ingress to the microstructure, hydrogen promotes the formation of low-energy dislocation nanostructures. These are characterized by cell patterns whose misorientation increases with strain, which concomitantly attracts further hydrogen up to a critical amount inducing failure. The appearance of the failure zone resembles the "fish eye" associated to inclusions as stress concentrators, a commonly accepted cause for failure. It is shown that the actual crack initiation is the dislocation nanostructure and its associated strain partitioning.

| S-EPMC7673732 | biostudies-literature

In vivo severe corrosion and hydrogen embrittlement of retrieved modular body titanium alloy hip-implants.

Project description:Titanium alloys are widely used in total-joint replacements due to a combination of outstanding mechanical properties, biocompatibility, passivity, and corrosion resistance. Nevertheless, retrieval studies have pointed out that these materials can be subjected to localized or general corrosion in modular interfaces when mechanical abrasion of the oxide film (fretting) occurs. Modularity adds large crevice environments, which are subject to micromotion between contacting interfaces and differential aeration of the surface. Titanium alloys are also known to be susceptible to hydrogen absorption, which can induce precipitation of hydrides and subsequent brittle failure. In this work, the surface of three designs of retrieved hip-implants with Ti-6Al-4V/Ti-6Al-4V modular taper interfaces in the stem were investigated for evidence of severe corrosion and precipitation of brittle hydrides during fretting-crevice corrosion in the modular connections. The devices were retrieved from patients and studied by means of scanning electron microscopy (SEM), X-ray diffraction (XRD), and chemical analysis. The surface qualitative investigation revealed severe corrosion attack in the mating interfaces with evidence of etching, pitting, delamination, and surface cracking. In vivo hydrogen embrittlement was shown to be a mechanism of degradation in modular connections resulting from electrochemical reactions induced in the crevice environment of the tapers during fretting-crevice corrosion.

| S-EPMC2667129 | biostudies-literature

Revisiting stress-corrosion cracking and hydrogen embrittlement in 7xxx-Al alloys at the near-atomic-scale.

Project description:The high-strength 7xxx series aluminium alloys can fulfil the need for light, high strength materials necessary to reduce carbon-emissions, and are extensively used in aerospace for weight reduction purposes. However, as all major high-strength materials, these alloys can be sensitive to stress-corrosion cracking (SCC) through anodic dissolution and hydrogen embrittlement (HE). Here, we study at the near-atomic-scale the intra- and inter-granular microstructure ahead and in the wake of a propagating SCC crack. Moving away from model alloys and non-industry standard tests, we perform a double cantilever beam (DCB) crack growth test on an engineering 7xxx Al-alloy. H is found segregated to planar arrays of dislocations and to grain boundaries that we can associate to the combined effects of hydrogen-enhanced localised plasticity (HELP) and hydrogen-enhanced decohesion (HEDE) mechanisms. We report on a Mg-rich amorphous hydroxide on the corroded crack surface and evidence of Mg-related diffusional processes leading to dissolution of the strengthening η-phase precipitates ahead of the crack.

| S-EPMC9314352 | biostudies-literature

Application of DFT Simulation to the Investigation of Hydrogen Embrittlement Mechanism and Design of High Strength Low Alloy Steel

Project description:In this work, first-principles methods were performed to simulate interactions between hydrogen and common alloying elements of high strength low alloy (HSLA) steel. The world has been convinced that hydrogen could be one of the future clean energy sources. HSLA steel with a balance of strength, toughness, and hydrogen embrittlement susceptibility is expected for application in large-scale hydrogen storage and transportation. To evaluate the property deterioration under a hydrogen atmosphere, hydrogen embrittlement (HE) of HSLA steel attracts attention. However, due to the small size of hydrogen atoms, the mechanism of HE is challenging to observe directly by current experimental methods. To understand the HE mechanism at an atomic level, DFT methods were applied to simulate the effects of alloying elements doping in bcc-Fe bulk structure and grain boundary structure. Furthermore, the potential application of DFT to provide theoretical advice for HSLA steel design is discussed.

| S-EPMC9821312 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data