Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Structure-driven CO2 selectivity and gas capacity of ionic clathrate hydrates.

ABSTRACT: Ionic clathrate hydrates can selectively capture small gas molecules such as CO2, N2, CH4 and H2. We investigated CO2 + N2 mixed gas separation properties of ionic clathrate hydrates formed with tetra-n-butylammonium bromide (TBAB), tetra-n-butylammonium chloride (TBAC), tetra-n-butylphosphonium bromide (TBPB) and tetra-n-butylphosphonium chloride (TBPC). The results showed that CO2 selectivity of TBAC hydrates was remarkably higher than those of the other hydrates despite less gas capacity of TBAC hydrates. The TBAB hydrates also showed irregularly high CO2 selectivity at a low pressure. X-ray diffraction and Raman spectroscopic analyses clarified that TBAC stably formed the tetragonal hydrate structure, and TBPB and TBPC formed the orthorhombic hydrate structure. The TBAB hydrates showed polymorphic phases which may consist of the both orthorhombic and tetragonal hydrate structures. These results showed that the tetragonal hydrate captured CO2 more efficiently than the orthorhombic hydrate, while the orthorhombic hydrate has the largest gas capacity among the basic four structures of ionic clathrate hydrates. The present study suggests new potential for improving gas capacity and selectivity of ionic clathrate hydrates by choosing suitable ionic guest substances for guest gas components.

SUBMITTER: Hashimoto H

PROVIDER: S-EPMC5722917 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Clathrate hydrates in interstellar environment.

Project description:Clathrate hydrates (CHs) are ubiquitous in earth under high-pressure conditions, but their existence in the interstellar medium (ISM) remains unknown. Here, we report experimental observations of the formation of methane and carbon dioxide hydrates in an environment analogous to ISM. Thermal treatment of solid methane and carbon dioxide-water mixture in ultrahigh vacuum of the order of 10-10 mbar for extended periods led to the formation of CHs at 30 and 10 K, respectively. High molecular mobility and H bonding play important roles in the entrapment of gases in the in situ formed 512 CH cages. This finding implies that CHs can exist in extreme low-pressure environments present in the ISM. These hydrates in ISM, subjected to various chemical processes, may act as sources for relevant prebiotic molecules.

| S-EPMC6358667 | biostudies-other

Influence of Sodium Chloride on the Formation and Dissociation Behavior of CO2 Gas Hydrates.

Project description:We present an experimental study on the formation and dissociation characteristics of carbon dioxide (CO2) gas hydrates using Raman spectroscopy. The CO2 hydrates were formed from sodium chloride/water solutions with salinities of 0-10 wt %, which were pressurized with liquid CO2 in a stirred vessel at 6 MPa and a subcooling of 9.5 K. The formation of the CO2 hydrate resulted in a hydrate gel where the solid hydrate can be considered as the continuous phase that includes small amounts of a dispersed liquid water-rich phase that has not been converted to hydrate. During the hydrate formation process we quantified the fraction of solid hydrate, xH, and the fraction of the dispersed liquid water-rich phase, xL, from the signature of the hydroxyl (OH)-stretching vibration of the hydrate gel. We found that the fraction of hydrate xH contained in the hydrate gel linearly depends on the salinity of the initial liquid water-rich phase. In addition, the ratio of CO2 and water was analyzed in the liquid water-rich phase before hydrate formation, in the hydrate gel during growth and dissociation, and after its complete dissociation again in the liquid water-rich phase. We observed a supersaturation of CO2 in the water-rich phase after complete dissociation of the hydrate gel and were able to show that the excess CO2 exists as dispersed micro- or nanoscale liquid droplets in the liquid water-rich phase. These residual nano- and microdroplets could be a possible explanation for the so-called memory effect.

| S-EPMC5608380 | biostudies-literature

Methanol incorporation in clathrate hydrates and the implications for oil and gas pipeline flow assurance and icy planetary bodies.

Project description:One of the best-known uses of methanol is as antifreeze. Methanol is used in large quantities in industrial applications to prevent methane clathrate hydrate blockages from forming in oil and gas pipelines. Methanol is also assigned a major role as antifreeze in giving icy planetary bodies (e.g., Titan) a liquid subsurface ocean and/or an atmosphere containing significant quantities of methane. In this work, we reveal a previously unverified role for methanol as a guest in clathrate hydrate cages. X-ray diffraction (XRD) and NMR experiments showed that at temperatures near 273 K, methanol is incorporated in the hydrate lattice along with other guest molecules. The amount of included methanol depends on the preparative method used. For instance, single-crystal XRD shows that at low temperatures, the methanol molecules are hydrogen-bonded in 4.4% of the small cages of tetrahydrofuran cubic structure II hydrate. At higher temperatures, NMR spectroscopy reveals a number of methanol species incorporated in hydrocarbon hydrate lattices. At temperatures characteristic of icy planetary bodies, vapor deposits of methanol, water, and methane or xenon show that the presence of methanol accelerates hydrate formation on annealing and that there is unusually complex phase behavior as revealed by powder XRD and NMR spectroscopy. The presence of cubic structure I hydrate was confirmed and a unique hydrate phase was postulated to account for the data. Molecular dynamics calculations confirmed the possibility of methanol incorporation into the hydrate lattice and show that methanol can favorably replace a number of methane guests.

| S-EPMC3666673 | biostudies-literature

The CO2 Absorption in Flue Gas Using Mixed Ionic Liquids.

Project description:Because of the appealing properties, ionic liquids (ILs) are believed to be promising alternatives for the CO2 absorption in the flue gas. Several ILs, such as [NH2emim][BF4], [C4mim][OAc], and [NH2emim[OAc], have been used to capture CO2 of the simulated flue gas in this work. The structural changes of the ILs before and after absorption were also investigated by quantum chemical methods, FTIR, and NMR technologies. However, the experimental results and theoretical calculation showed that the flue gas component SO2 would significantly weaken the CO2 absorption performance of the ILs. SO2 was more likely to react with the active sites of the ILs than CO2. To improve the absorption capacity, the ionic liquid (IL) mixture [C4mim][OAc]/ [NH2emim][BF4] were employed for the CO2 absorption of the flue gas. It is found that the CO2 absorption capacity would be increased by about 25%, even in the presence of SO2. The calculation results suggested that CO2 could not compete with SO2 for reacting with the IL during the absorption process. Nevertheless, SO2 might be first captured by the [NH2emim][BF4] of the IL mixture, and then the [C4mim][OAc] ionic liquid could absorb more CO2 without the interference of SO2.

| S-EPMC7179232 | biostudies-literature

CO2 Capture from Flue Gas Based on Tetra-n-butylammonium Fluoride Hydrates at Near Ambient Temperature.

Project description:Semiclathrate hydrates of tetra-n-butylammonium fluoride (TBAF) are potential CO2 capture media because they can capture CO2 at near ambient temperature under moderate pressure such as below 1 MPa. In addition to other semiclathrate hydrates, CO2 capture properties of TBAF hydrates may vary with formation conditions such as aqueous composition and pressure because of their complex hydrate structures. In this study, we investigated CO2 capture properties of TBAF hydrates for simulated flue gas, that is, CO2 + N2 gas, by the gas separation test with three different parameters for each pressure and aqueous composition of TBAF in mass fraction (w TBAF). The CO2 capture amount in TBAF hydrates with w TBAF = 0.10 was smaller than that obtained with w TBAF = 0.20 and 0.30. The results found that gas pressure greatly changed the CO2 capture amount in TBAF hydrates, and the aqueous composition highly affected CO2 selectivity. The crystal morphology and single-crystal structure analyses suggested that polymorphism of TBAF hydrates with congruent aqueous solution may lower both the CO2 capture amount and selectivity. Our present results proposed that an aqueous solution with w TBAF = 0.20 is advantageous for the CO2 capture from flue gas compared to near congruent solutions of TBAF hydrates (w TBAF = 0.30) and dilute solution (w TBAF = 0.10).

| S-EPMC7143428 | biostudies-literature

Understanding gas capacity, guest selectivity, and diffusion in porous liquids.

Project description:Porous liquids are a new class of material that could have applications in areas such as gas separation and homogeneous catalysis. Here we use a combination of measurement techniques, molecular simulations, and control experiments to advance the quantitative understanding of these liquids. In particular, we show that the cage cavities remain unoccupied in the absence of a suitable guest, and that the liquids can adsorb large quantities of gas, with gas occupancy in the cages as high as 72% and 74% for Xe and SF6, respectively. Gases can be reversibly loaded and released by using non-chemical triggers such as sonication, suggesting potential for gas separation schemes. Diffusion NMR experiments show that gases are in dynamic equilibrium between a bound and unbound state in the cage cavities, in agreement with recent simulations for related porous liquids. Comparison with gas adsorption in porous organic cage solids suggests that porous liquids have similar gas binding affinities, and that the physical properties of the cage molecule are translated into the liquid state. By contrast, some physical properties are different: for example, solid homochiral porous cages show enantioselectivity for chiral aromatic alcohols, whereas the equivalent homochiral porous liquids do not. This can be attributed to a loss of supramolecular organisation in the isotropic porous liquid.

| S-EPMC5431659 | biostudies-literature

Hydrogen and Deuterium Molecular Escape from Clathrate Hydrates: "Leaky" Microsecond-Molecular-Dynamics Predictions.

Project description:It is predicted herewith that the leakage of both hydrogen (H2) and deuterium (D2) from sII clathrate hydrates, borne of guest chemical-potential equalization driving enhanced nonequilibrium intercage hopping, should be observable experimentally. To this end, we have designed simulations to realize and study this process by microsecond molecular dynamics within the temperature range of 150-180 K-for which the hydrate lattice was found to be stable. In this pursuit, we considered initial large-cage (51264) guest occupancies of 1-4, with single occupation of 512 cavities. Examining transient, nonequilibrium intercage hopping, we present a lattice-escape activation energy for the four nominal large-cage occupancies (1-4), by fitting to the hydrate-leakage rate. The intercage hopping of H2 and D2 was studied using Markov-chain models and expressed at different temperatures and large-cage occupancies. The free energy of guest "binding" in the large and small cages was also computed for all of the occupancies. Toward equilibrium, following the majority of H2/D2 escape via leakage, the percentage of occupancies was calculated for both H2 and D2 for all of the systems for all initial nominal large-cage occupancies; here, not unexpectedly, double occupancies occurred more favorably in large cages and single occupancies dominated in small cages.

| S-EPMC8279647 | biostudies-literature

Breaking the trade-off between selectivity and adsorption capacity for gas separation.

Project description:The trade-off between selectivity and adsorption capacity with porous materials is a major roadblock to reducing the energy footprint of gas separation technologies. To address this matter, we report herein a systematic crystal engineering study of C2H2 removal from CO2 in a family of hybrid ultramicroporous materials (HUMs). The HUMs are composed of the same organic linker ligand, 4-(3,5-dimethyl-1H-pyrazol-4-yl)pyridine, pypz, three inorganic pillar ligands, and two metal cations, thereby affording six isostructural pcu topology HUMs. All six HUMs exhibited strong binding sites for C2H2 and weaker affinity for CO2. The tuning of pore size and chemistry enabled by crystal engineering resulted in benchmark C2H2/CO2 separation performance. Fixed-bed dynamic column breakthrough experiments for an equimolar (v/v = 1:1) C2H2/CO2 binary gas mixture revealed that one sorbent, SIFSIX-21-Ni, was the first C2H2 selective sorbent that combines exceptional separation selectivity (27.7) with high adsorption capacity (4 mmol·g-1).

| S-EPMC8600127 | biostudies-literature

Calculations of NMR properties for sI and sII clathrate hydrates of methane, ethane and propane.

Project description:Calculations of NMR parameters (the absolute shielding constants and the spin-spin coupling constants) for 5(12), 5(12)6(2) and 5(12)6(4) cages enclathrating CH4, C2H6 and C3H8 molecules are presented. The DFT/B3LYP/HuzIII-su3 level of theory was employed. The (13)C shielding constants of guest molecules are close to available experimental data. In two cases (the ethane in 5(12) and the propane in 5(12)6(2) cages) the (13)C shielding constants are reported for the first time. Inversion of the methyl/methylene (13)C and (1)H shielding constants order is found for propane in the 5(12)6(2) cage. Topological criteria are used to interpret the changes of values of NMR parameters of water molecules and they establish a connection between single cages and bulk crystal.

| S-EPMC4236610 | biostudies-literature

Characterizing Olefin Selectivity and Stability of Silver Salts in Ionic Liquids Using Inverse Gas Chromatography.

Project description:Separation systems utilizing silver(I) ion-olefin complexation have limitations since silver(I) ions can be poisoned or reduced to metallic silver. Ionic liquids (ILs) are used as solvents for silver(I) ions to facilitate separations since their physico-chemical properties can be easily tuned. To develop separation systems with sustainable olefin selectivity, factors that affect silver(I) ion stability need to be understood. In this study, a total of 13 silver salt/IL mixtures were examined by inverse gas chromatography to identify the effects of silver salt anion and IL cation/anion combination on silver(I) ion stability. The effects of temperature and three different exposure gases on silver(I) ion stability were systematically studied. Exposing silver salt/IL mixtures to hydrogen at high temperatures had a greater effect on decreasing silver(I) ion-olefin complexation. Silver(I) ions from the silver bis[(trifluoromethyl)sulfonyl]imide ([NTf2 -]) salt were more stable in [NTf2 -]-containing ILs than in [BF4 -]-containing ILs. Optimum mixtures exhibited high olefin selectivity and were stable beyond 90 h when exposed to hydrogen gas.

| S-EPMC7726951 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data