Dataset Information

Characterization and isotherm data for adsorption of Cd2+ from aqueous solution by adsorbent from mixture of bagasse-bentonite.

ABSTRACT: The usage of wastes of baggase would be admirable from environmental and solid waste management point of view. Thus, herein, this data set present a facile method for providing an adsorbent from mixture of bagasse-bentonite. The prepared adsorbent was applied to remove Cd2+ from aqueous solution. The characterization data of the adsorbent were analyzed using XRF and FTIR methods. The XRF test results showed the changes of elemental content in adsorbent after the adsorption indicated that adsorbent can absorb Cd2+. The FTIR test results showed that adsorbent has a functional group that is useful in adsorption process. It was conducted in laboratory scale and the adsorption technique was batch technique. The information regarding isotherms of cadmium ions adsorption were listed. The Langmuir isotherm was suitable for correlation of equilibrium data. The acquired data indicated that the adsorption of Cd2+ by the adsorbent prepared from mixture of bagasse-bentonite is a promising technique for treating Cd-bearing wastewaters.

SUBMITTER: Kuncoro EP

PROVIDER: S-EPMC5723263 | biostudies-literature | 2018 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Characterization and isotherm data for adsorption of Cd<sup>2+</sup> from aqueous solution by adsorbent from mixture of bagasse-bentonite.

Kuncoro Eko Prasetyo EP Mitha Isnadina Dwi Ratri DR Darmokoesoemo Handoko H Darmokoesoemo Handoko H Dzembarahmatiny Fembriany F Kusuma Heri Septya HS

Data in brief 20171121

The usage of wastes of baggase would be admirable from environmental and solid waste management point of view. Thus, herein, this data set present a facile method for providing an adsorbent from mixture of bagasse-bentonite. The prepared adsorbent was applied to remove Cd<sup>2+</sup> from aqueous solution. The characterization data of the adsorbent were analyzed using XRF and FTIR methods. The XRF test results showed the changes of elemental content in adsorbent after the adsorption indicated t ...[more]

PMID: 29234692

Similar Datasets

Project description:Oil palm trunk (OPT) represents one of the five main oil palm biomass wastes with high carbon content that can be economically converted to a large surface area, porous activated carbon (AC) adsorbent to treat palm oil mill effluent wastewater in Indonesia and Malaysia. In the first portion of this work, the design of the experiment was used to determine the optimum set of synthesis parameters required to maximize the iodine number of AC [i.e., Brunauer-Emmett-Teller (BET) specific surface area indicator] prepared from OPT via chemical activation route using H3PO4. The iodine numbers of AC and AC yield were probed as the impregnation ratio, the activation time, and the activation temperature were varied in the range of 0.28-3.47, 5.68-69.32 min, and 379-521 °C, respectively. An impregnation ratio of 2.29, an activation time of 6 min, and an activation temperature of 450 °C were identified as the optimum set of synthesis parameters. In the second portion of the work, the AC synthesized using the optimum parameters were then characterized and tested as an adsorbent for tannin. N2 sorption results revealed that the AC exhibits type IV isotherm, that is, contains micropores and mesopores and displays a relatively high BET specific surface area of 1657 m2 g-1. Adsorption equilibria isotherms for tannin adsorption onto the AC were collected at three different pH of 2, 4, and 6 and were nonlinearly fitted using Langmuir and Freundlich isotherm models, where the Langmuir isotherm gave better fitting than Freundlich. The higher adsorption capacity at lower pH can be explained in terms of the absence of electrostatic repulsion interaction between the AC surface and the tannic acid species as suggested by the point of zero charges (pHpzc) of 4.8 and an increasing ionization of tannic acid with pH rise between 4 and 7. Adsorption kinetics data were also obtained at four different pH of 2, 4, 6, and 8 where the nonlinear pseudo-first-order model best fitted the kinetic at pH of 2 and the nonlinear pseudo-second-order model represented the kinetic best at the remaining higher pH, which suggests that tannin adsorption onto AC occurred by physisorption at pH of 2 and by chemisorption at pH of 4, 6, and 8.

Dataset Information

Characterization and isotherm data for adsorption of Cd2+ from aqueous solution by adsorbent from mixture of bagasse-bentonite.

Publications

Characterization and isotherm data for adsorption of Cd<sup>2+</sup> from aqueous solution by adsorbent from mixture of bagasse-bentonite.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets