Data visualizations to detect systematic errors in laboratory assay results.
Ontology highlight
ABSTRACT:
SUBMITTER: Lotsch J
PROVIDER: S-EPMC5723702 | biostudies-literature | 2017 Dec
REPOSITORIES: biostudies-literature
Publications
Data visualizations to detect systematic errors in laboratory assay results.
Pharmacology research & perspectives 20171201 6
The measurement of concentrations of drugs and endogenous substances is widely used in basic and clinical pharmacology research and service tasks. Using data science-derived visualizations of laboratory data, it is demonstrated on a real-life example that basic statistical exploration of laboratory assay results or advised standard visual methods of data inspection may fall short in detecting systematic laboratory errors. For example, data pathologies such as generating always the same value in ...[more]
Similar Datasets
Project description:A current debate is whether increased looking time in infancy is related to violation of expectations. In this study, 6- to 9-month-old infants' brain activity was analyzed during presentation of correct and incorrect solutions to simple arithmetic equations [(e.g., presentation of 1 + 1; one doll on a TV monitor, with another doll added from behind a screen, followed by a solution of 2 (correct) or 1 (incorrect)]. Infants looked longer at incorrect solutions than at correct ones. Event-related potentials, time-locked to the presentation of the solution, also differed between conditions, with greater negative activity for the incorrect solution condition. Spectral analysis showed a similar pattern to that of adults observing correct and incorrect arithmetical equations. These findings show (i) that the brain network involved in error detection can be identified in infancy and (ii) that this network can support an association between looking time and violation of expectations.
| S-EPMC1567933 | biostudies-literature
Project description:MotivationData visualization is an important tool for exploring and communicating findings from genomic and healthcare datasets. Yet, without a systematic way of organizing and describing the design space of data visualizations, researchers may not be aware of the breadth of possible visualization design choices or how to distinguish between good and bad options.ResultsWe have developed a method that systematically surveys data visualizations using the analysis of both text and images. Our method supports the construction of a visualization design space that is explorable along two axes: why the visualization was created and how it was constructed. We applied our method to a corpus of scientific research articles from infectious disease genomic epidemiology and derived a Genomic Epidemiology Visualization Typology (GEViT) that describes how visualizations were created from a series of chart types, combinations and enhancements. We have also implemented an online gallery that allows others to explore our resulting design space of visualizations. Our results have important implications for visualization design and for researchers intending to develop or use data visualization tools. Finally, the method that we introduce is extensible to constructing visualizations design spaces across other research areas.Availability and implementationOur browsable gallery is available at http://gevit.net and all project code can be found at https://github.com/amcrisan/gevitAnalysisRelease.Supplementary informationSupplementary data are available at Bioinformatics online.
| S-EPMC6513170 | biostudies-literature
Project description:While the importance of random sequencing errors decreases at higher DNA or RNA sequencing depths, systematic sequencing errors (SSEs) dominate at high sequencing depths and can be difficult to distinguish from biological variants. These SSEs can cause base quality scores to underestimate the probability of error at certain genomic positions, resulting in false positive variant calls, particularly in mixtures such as samples with RNA editing, tumors, circulating tumor cells, bacteria, mitochondrial heteroplasmy, or pooled DNA. Most algorithms proposed for correction of SSEs require a training data set, which is typically either from a part of the data set being M-bM-^@M-^\recalibratedM-bM-^@M-^] (Genome Analysis ToolKit, or GATK) or from a separate data set with special characteristics (SysCall). Here, we combine the advantages of these approaches by adding synthetic RNA spike-in standards to human RNA, and use GATK to recalibrate base quality scores with reads mapped to the spike-in standards. Compared to conventional GATK recalibration that uses reads mapped to the genome, spike-ins improve the accuracy of Illumina base quality scores by a mean of 5 units, and by as much as 13 units M-BM- at CpG sites. In addition, since reads mapping to the genome are not used for recalibration, our method allows run-specific recalibration even for the many species without a comprehensive and accurate SNP database. We also use GATK with the spike-in standards to demonstrate that the Illumina RNA sequencing runs overestimate quality scores for AC, CC, GC, GG, and TC dinucleotides, while SOLiD has less dinucleotide SSEs but more SSEs for certain cycles. We conclude that using these DNA and RNA spike-in standards with GATK improves base quality score recalibration. Four human RNA samples with equimolar ERCC spike-in standards were sequenced on Illumina. Two human brain/liver/muscle RNA mixtures with dynamic range of ERCC spike-in standards were sequenced on SOLiD.
2012-03-03 | E-GEOD-36217 | biostudies-arrayexpress
Project description:It is often unavoidable to combine data from different sequencing centers or sequencing platforms when compiling data sets with a large number of individuals. However, the different data are likely to contain specific systematic errors that will appear as SNPs. Here, we devise a method to detect systematic errors in combined data sets. To measure quality differences between individual genomes, we study pairs of variants that reside on different chromosomes and co-occur in individuals. The abundance of these pairs of variants in different genomes is then used to detect systematic errors due to batch effects. Applying our method to the 1000 Genomes data set, we find that coding regions are enriched for errors, where ?1% of the higher frequency variants are predicted to be erroneous, whereas errors outside of coding regions are much rarer (<0.001%). As expected, predicted errors are found less often than other variants in a data set that was generated with a different sequencing technology, indicating that many of the candidates are indeed errors. However, predicted 1000 Genomes errors are also found in other large data sets; our observation is thus not specific to the 1000 Genomes data set. Our results show that batch effects can be turned into a virtue by using the resulting variation in large scale data sets to detect systematic errors.
| S-EPMC6185451 | biostudies-literature
Project description:In recent years, several new diffusion MRI approaches have been proposed to explore microstructural properties of the white matter, such as Q-ball imaging and spherical deconvolution-based techniques to estimate the orientation distribution function. These methods can describe the estimated diffusion profile with a higher accuracy than the more conventional second-rank diffusion tensor imaging technique. Despite many important advances, there are still inconsistent findings between different models that investigate the "crossing fibers" issue. Due to the high information content and the complex nature of the data, it becomes virtually impossible to interpret and compare results in a consistent manner. In this work, we present novel fiber tractography visualization approaches that provide a more complete picture of the microstructural architecture of fiber pathways: multi-fiber hyperstreamlines and streamribbons. By visualizing, for instance, the estimated fiber orientation distribution along the reconstructed tract in a continuous way, information of the local fiber architecture is combined with the global anatomical information derived from tractography. Facilitating the interpretation of diffusion MRI data, this approach can be useful for comparing different diffusion reconstruction techniques and may improve our understanding of the intricate white matter network.
| S-EPMC3839966 | biostudies-literature
Project description:Chromosome conformation capture (3C)-based techniques have recently been used to uncover the mystic genomic architecture in the nucleus. These techniques yield indirect data on the distances between genomic loci in the form of contact frequencies that must be normalized to remove various errors. This normalization process determines the quality of data analysis. In this study, we describe two systematic errors that result from the heterogeneous local density of restriction sites and different local chromatin states, methods to identify and remove those artifacts, and three previously described sources of systematic errors in 3C-based data: fragment length, mappability, and local DNA composition. To explain the effect of systematic errors on the results, we used three different published data sets to show the dependence of the results on restriction enzymes and experimental methods. Comparison of the results from different restriction enzymes shows a higher correlation after removing systematic errors. In contrast, using different methods with the same restriction enzymes shows a lower correlation after removing systematic errors. Notably, the improved correlation of the latter case caused by systematic errors indicates that a higher correlation between results does not ensure the validity of the normalization methods. Finally, we suggest a method to analyze random error and provide guidance for the maximum reproducibility of contact frequency maps.
| S-EPMC4696798 | biostudies-literature
Project description:Objective To synthesize and appraise economic evaluations of vision screening to detect vision impairment in children. Methods Literature searches were conducted on seven electronic databases, grey literature, and websites of agencies conducting health technology assessments. Studies were included if they (1) were full, comparative economic evaluations that used cost-utility, cost-benefit, cost-effectiveness, cost-consequence, or cost-analysis methods; (2) described screening services designed to detect amblyopia, strabismus, or uncorrected refractive errors in children under 6 years of age; and (3) published after 1994. High-quality studies were synthesized descriptively. Currencies were reported in 2019 Canadian dollars. Quality was assessed with the Pediatric Quality Appraisal Questionnaire (PQAQ). Results Vision screening services were conducted by paid staff, volunteers, or health care professionals in schools or clinics. Thirteen studies were published from five countries: China (n = 1), United States (n = 4), United Kingdom (n = 1), Canada (n = 1), and Germany (n = 6). Analytical techniques included cost-utility/cost-effectiveness combination (n = 2), cost-effectiveness analysis (n = 7), cost-utility analysis (n = 1), cost-benefit analysis (n = 1), cost-consequence analysis (n = 1), and cost analysis (n = 1). Incremental cost-effectiveness ratios ranged from C$1,056 to C$151,274 per additional case detected/prevented and from C$9,429 to C$30,254,703 per additional QALY gained, depending on the type of screening service and comparator. Six studies were determined to be of high quality. Conclusion Vision screening to detect amblyopia for young children may be cost-effective compared with no screening if amblyopia reduced quality of life. Studies varied significantly in the type of screening services and comparators used. Methodological limitations were common. Future studies would be aided immensely by prospective studies on the impact of amblyopia on the health-related quality of life of young children and guidelines on the effective conduct of vision screening. Supplementary Information The online version contains supplementary material available at 10.17269/s41997-021-00572-x.
| S-EPMC8577413 | biostudies-literature
Project description:While the importance of random sequencing errors decreases at higher DNA or RNA sequencing depths, systematic sequencing errors (SSEs) dominate at high sequencing depths and can be difficult to distinguish from biological variants. These SSEs can cause base quality scores to underestimate the probability of error at certain genomic positions, resulting in false positive variant calls, particularly in mixtures such as samples with RNA editing, tumors, circulating tumor cells, bacteria, mitochondrial heteroplasmy, or pooled DNA. Most algorithms proposed for correction of SSEs require a training data set, which is typically either from a part of the data set being “recalibrated” (Genome Analysis ToolKit, or GATK) or from a separate data set with special characteristics (SysCall). Here, we combine the advantages of these approaches by adding synthetic RNA spike-in standards to human RNA, and use GATK to recalibrate base quality scores with reads mapped to the spike-in standards. Compared to conventional GATK recalibration that uses reads mapped to the genome, spike-ins improve the accuracy of Illumina base quality scores by a mean of 5 units, and by as much as 13 units at CpG sites. In addition, since reads mapping to the genome are not used for recalibration, our method allows run-specific recalibration even for the many species without a comprehensive and accurate SNP database. We also use GATK with the spike-in standards to demonstrate that the Illumina RNA sequencing runs overestimate quality scores for AC, CC, GC, GG, and TC dinucleotides, while SOLiD has less dinucleotide SSEs but more SSEs for certain cycles. We conclude that using these DNA and RNA spike-in standards with GATK improves base quality score recalibration.
2012-03-03 | GSE36217 | GEO
Project description:While magnetic resonance imaging (MRI) data is itself 3D, it is often difficult to adequately present the results papers and slides in 3D. As a result, findings of MRI studies are often presented in 2D instead. A solution is to create figures that include perspective and can convey 3D information; such figures can sometimes be produced by standard functional magnetic resonance imaging (fMRI) analysis packages and related specialty programs. However, many options cannot provide functionality such as visualizing activation clusters that are both cortical and subcortical (i.e., a 3D glass brain), the production of several statistical maps with an identical perspective in the 3D rendering, or animated renderings. Here I detail an approach for creating 3D visualizations of MRI data that satisfies all of these criteria. Though a 3D 'glass brain' rendering can sometimes be difficult to interpret, they are useful in showing a more overall representation of the results, whereas the traditional slices show a more local view. Combined, presenting both 2D and 3D representations of MR images can provide a more comprehensive view of the study's findings.
| S-EPMC4648228 | biostudies-literature
Project description:Bicistronic reporter assay systems have become a mainstay of molecular biology. While the assays themselves encompass a broad range of diverse and unrelated experimental protocols, the numerical data garnered from these experiments often have similar statistical properties. In general, a primary dataset measures the paired expression of two internally controlled reporter genes. The expression ratio of these two genes is then normalized to an external control reporter. The end result is a 'ratio of ratios' that is inherently sensitive to propagation of the error contributed by each of the respective numerical components. The statistical analysis of this data therefore requires careful handling in order to control for the propagation of error and its potentially misleading effects. A careful survey of the literature found no consistent method for the statistical analysis of data generated from these important and informative assay systems. In this report, we present a detailed statistical framework for the systematic analysis of data obtained from bicistronic reporter assay systems. Specifically, a dual luciferase reporter assay was employed to measure the efficiency of four programmed -1 frameshift signals. These frameshift signals originate from the L-A virus, the SARS-associated Coronavirus and computationally identified frameshift signals from two Saccharomyces cerevisiae genes. Furthermore, these statistical methods were applied to prove that the effects of anisomycin on programmed -1 frameshifting are statistically significant. A set of Microsoft Excel spreadsheets, which can be used as templates for data generated by dual reporter assay systems, and an online tutorial are available at our website (http://dinmanlab.umd.edu/statistics). These spreadsheets could be easily adapted to any bicistronic reporter assay system.
| S-EPMC534638 | biostudies-literature