Dataset Information

Natural Erosion of Sandstone as Shape Optimisation.

ABSTRACT: Natural arches, pillars and other exotic sandstone formations have always been attracting attention for their unusual shapes and amazing mechanical balance that leave a strong impression of intelligent design rather than the result of a stochastic process. It has been recently demonstrated that these shapes could have been the result of the negative feedback between stress and erosion that originates in fundamental laws of friction between the rock's constituent particles. Here we present a deeper analysis of this idea and bridge it with the approaches utilized in shape and topology optimisation. It appears that the processes of natural erosion, driven by stochastic surface forces and Mohr-Coulomb law of dry friction, can be viewed within the framework of local optimisation for minimum elastic strain energy. Our hypothesis is confirmed by numerical simulations of the erosion using the topological-shape optimisation model. Our work contributes to a better understanding of stochastic erosion and feasible landscape formations that could be found on Earth and beyond.

SUBMITTER: Ostanin I

PROVIDER: S-EPMC5725602 | biostudies-literature | 2017 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Natural Erosion of Sandstone as Shape Optimisation.

Ostanin Igor I Safonov Alexander A Oseledets Ivan I

Scientific reports 20171211 1

Natural arches, pillars and other exotic sandstone formations have always been attracting attention for their unusual shapes and amazing mechanical balance that leave a strong impression of intelligent design rather than the result of a stochastic process. It has been recently demonstrated that these shapes could have been the result of the negative feedback between stress and erosion that originates in fundamental laws of friction between the rock's constituent particles. Here we present a deep ...[more]

PMID: 29230060

Similar Datasets

Project description:An accurate and reliable description of the porosity-permeability relationship in geological materials is valuable in understanding subsurface fluid movement. This is important for reservoir characterisation, energy exploitation, geological carbon storage (GCS) and groundwater contamination and remediation. Whilst the relationship between pore characteristics and porosity and permeability are well examined, further investigation into the influence of grain characteristics on porosity and permeability would be beneficial due to the inherent relationship between grains and pores. This work aims to determine whether incorporation of grain characteristics into a porosity-permeability model is effective in constraining this relationship. Two fully digital approaches to individual 3D grain analysis based upon watershed segmentation are compared to determine the most effective, yet simple, workflow applicable to core plugs of significantly compacted grains. The identification of an effective segmentation workflow will facilitate future work on similarly complex materials, removing the need for traditional time-consuming and manual techniques. We use the most effective approach of measuring grain shape (sphericity) and size (Feret diameter) alongside an established fully digital workflow to measure porosity and permeability to investigate the impact of grain characteristics on porosity and permeability. We show that grain sphericity and porosity exhibit a positive relationship whereas no such relationship exists with grain size. Measurements of grain sphericity are applied to calculate a Kozeny-Carman (K-C) type porosity-permeability fit which was found to be unsatisfactory, compared to a simpler fit excluding any grain parameters. This is possibly due to the lower sphericity of the studied grains, deviating significantly from the K-C assumption that grains are entirely spherical. The simpler fit is most suitable for the studied materials, showing that inclusion of grain characteristics is not effective for better defining the porosity-permeability relationship in a K-C paradigm for these samples. This highlights the need for a model capable of considering a range of grain sphericities to further constrain the porosity-permeability relationship.

Project description:Surfactant flooding is adjudged one of the most promising chemicals enhanced oil recovery (cEOR) methods due to its high microscopic sweep efficiency. This surfactant shows high potential in mobilizing trapped residual oil (ganglia) through excellent lowering of the interfacial tension (IFT) between the crude oil-aqueous interface to ultra-low values while favorably altering the wettability (oil-wet to water-wet). Surfactant adsorption is a critical factor that determines how successful this cEOR method will be as well as the project economics. Surfactant retention due to adsorption caused majorly by electrostatic forces of attraction between hydrophilic head, and the positive and negative charges of the adsorbent solid surface leading to insufficiency of the remaining surfactant concentration in the injected slug to achieve the supposed ultralow IFT needed for mobilization. This article describes the experimental data on the adsorption of a natural surfactant derived from linseed oil and the results from its adsorption isotherm modelling. This anionic surfactant (LSO-derived) has a CMC value of 2500 ppm, average fractional removal of 0.60 under a range of concentrations (500, 1000, 2000, 4000, 8000, and 12000 ppm), with the adsorption kinetics revealing that adsorption density rises as a function of time with increasing adsorbate concentrations. Five different classical adsorption isotherm models were explored- in the form three (Redlich-Peterson or R-P), two (Langmuir, Freundlich, Temkin), one (Linear-Henry) parameters models. Their characteristics adsorption parameters were calculated, with highest adsorption capacity value of 2.955mg/g obtained from the simulation using OriginPro 2021 Software. The analysis demonstrates that the R-P model provided the greatest fit as a hybrid model with the highest correlation coefficient value. The kinetic adsorption models Pseudo-First Order (PFO), Pseudo-Second Order (PSO), Pseudo-Nth Order (PNO), and Intra-Particle Diffusion (IPD), as well as their thermodynamic property model, were also examined in addition to static isotherm models. On average, using non-linear regression approach, PSO and PNO provided the best appropriate fit models under this hypothesis, with correlation values of the nth order ranging from 0.443 to 2.122 (excluding 5.847 the non-converged fit value). Prior to thermodynamic analysis, it was confirmed by the IPD with multi-linear graphical characteristics that intra-particle transport was not the only rate-limiting step in adsorption processes and proceeded spontaneously by the This model can be utilized to design a template for LSO surfactant-rock adsorption in chemical flooding schemes for EOR applications.

Dataset Information

Natural Erosion of Sandstone as Shape Optimisation.

Publications

Natural Erosion of Sandstone as Shape Optimisation.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets