Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

MWCNT Coated Free-Standing Carbon Fiber Fabric for Enhanced Performance in EMI Shielding with a Higher Absolute EMI SE

ABSTRACT: A series of multi-walled carbon nanotube (MWCNT) coated carbon fabrics was fabricated using a facile dip coating process, and their performance in electrical conductivity, thermal stability, tensile strength, electromagnetic interference (EMI) and shielding effectiveness (SE) was investigated. A solution of MWCNT oxide and sodium dodecyl sulfate (SDS) in water was used in the coating process. MWCNTs were observed to coat the surfaces of carbon fibers and to fill the pores in the carbon fabric. Electrical conductivity of the composites was 16.42 S cm?1. An EMI shielding effectiveness of 37 dB at 2 GHz was achieved with a single layer of C/C composites, whereas the double layers resulted in 68 dB EMI SE at 2.7 GHz. Fabricated composites had a specific SE of 486.54 dB cm3 g?1 and an absolute SE of approximately 35,000 dB cm2 g?1. According to the above results, MWCNT coated C/C composites have the potential to be used in advanced shielding applications such as aerospace and auto mobile electronic devices.

SUBMITTER: Pothupitiya Gamage S

PROVIDER: S-EPMC5744285 | biostudies-literature | 2017 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Analysis of Shielding Effectiveness against Electromagnetic Interference (EMI) for Metal-Coated Polymeric Materials.

Project description:Lightweight materials, such as polymers and composites, are increasingly used in the automotive and aerospace industries. Recently, there has been an increase in the use of these materials, especially in electric vehicles. However, these materials cannot shield sensitive electronics from electromagnetic interference (EMI). The current work investigates the EMI performance of these lightweight materials using an experimental setup based on the ASTM D4935-99 standard and EMI simulation using the ANSYS HFSS. This work studies how metal coating from zinc and aluminum bronze can improve the shielding performance of polymer-based materials, such as polyphenylene sulfide (PPS), polyetheretherketone (PEEK), and polyphthalamide (PPA). Based on the findings of this study, a thin coating (50 μm) of Zn on the surface of PPS and a thin coating of 5 μm and 10 μm of Al-Bronze, respectively, on the surface of PEEK and PPA have indicated an increase in the shielding effectiveness (SE) when subjected to EMI. The shielding effectiveness significantly increased from 7 dB for the uncoated polymer to approximately 40 dB at low frequencies and up to approximately 60 dB at high frequencies for coated polymers. Finally, various approaches are recommended for improving the SE of polymeric materials under the influence of EMI.

| S-EPMC10143063 | biostudies-literature

MWCNT-Coated Glass Fabric/Phenol Composite Heating Panel Fabricated by Resin Infusion Process.

Project description:MWCNTs (multiwalled carbon nanotubes) were applied to fiber-reinforced composite materials with phenolic resin having flame retardance for the composite heating panels of railroad vehicles. Instead of dispersing MWCNTs in the matrix, the surface of a pristine plain-weave glass fiber fabric was coated with MWCNTs through a series of dip-coating and drying processes, followed by the resin infusion of the phenolic resin to make the composite heating panel. Before and after the resin infusion process, low percolation thresholds of 0.00216 wt%MWCNT (weight percent of MWCNTs) and 0.001 wt%MWCNT, respectively, were achieved, as were very high electrical conductivities of 47.5 S/m at 0.210 wt%MWCNT and 26.7 S/m at 0.116 wt%, respectively. The low threshold and high conductivity can be attributed to the formation of electrical pathways directly onto the glass fabrics. It was confirmed that mechanical properties such as modulus, strength, and maximum strain were at the same level as those of the pristine glass fabric composite. The heating performance with temperature uniformity, as well as the electrical and mechanical properties, indicates that the resin-infused glass fabric composite having MWCNTs directly coated onto the fabric surface can be a solution for lightweight structural composite heating panels for railway vehicles.

| S-EPMC10459559 | biostudies-literature

Improving the EMI shielding of graphene oxide (GNO)-coated glass-fiber-GNO-MA-grafted polypropylene (PP) composites and nylon 1D-2D nanocomposite foams.

Project description:The proliferation of the latest electronic gadgets and wireless communication devices can trigger electromagnetic interference (EMI), which has a detrimental impact on electronic devices and humans. Efficient EMI shielding materials are required for EMI-SE and they should be durable in external environments, lightweight, and cost-effective. GNO-coated glass-fiber-GNO-maleic anhydride-grafted polypropylene (MAPP) composite and carbon fiber-reinforced nylon 1D-2D nanocomposite foam were successfully prepared via a cost-effective thermal process. The composites were characterized using scanning electron microscopy (SEM), Raman spectroscopy, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The PP and nylon-based composites with ∼13% filler showed maximum electrical conductivity (EC) of 878 mS cm-1 and 1381 mS cm-1, respectively. The GNO-coated glass-fiber-GNO-MAPP foam displays a maximum EMI-SE of 120.6 dB, while the nylon graphene-carbon nanotube-metal nanoplatelet foam exhibits a maximum EMI-SE of 139.1 dB in the X-band region. The GFCFFeGMAPP composite possesses a minimum thickness of 2.56 mm and blocks most incoming radiation. These are some of the highest EMI-SE values reported so far for glass fiber and nylon-based composites, and the nylon-based composite showed excellent properties compared to the glass fiber-based composite. Thus, we believe that the developed composites can be used in a wide range of real applications, such as in military vehicles, aviation, automobiles, and the packaging of electronic circuits.

| S-EPMC9118371 | biostudies-literature

Electromagnetic Shielding by MXene-Graphene-PVDF Composite with Hydrophobic, Lightweight and Flexible Graphene Coated Fabric.

Project description:MXene and graphene based thin, flexible and low-density composite were prepared by cost effective spray coating and solvent casting method. The fabricated composite was characterized using Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray (EDX). The prepared composites showed hydrophobic nature with higher contact angle of 126°, -43 mN·m-1 wetting energy, -116 mN·m-1 spreading Coefficient and 30 mN·m-1 lowest work of adhesion. The composites displayed excellent conductivity of 13.68 S·cm-1 with 3.1 Ω·sq-1 lowest sheet resistance. All the composites showed an outstanding thermal stability and constrain highest weight lost until 400 °C. The MXene-graphene foam exhibited excellent EMI shielding of 53.8 dB (99.999%) with reflection of 13.10 dB and absorption of 43.38 dB in 8⁻12.4 GHz. The single coated carbon fabric displayed outstanding absolute shielding effectiveness of 35,369.82 dB·cm²·g-1. The above results lead perspective applications such as aeronautics, radars, air travels, mobile phones, handy electronics and military applications.

| S-EPMC6213747 | biostudies-literature

Interfacing MXene Flakes on a Magnetic Fiber Network as a Stretchable, Flexible, Electromagnetic Shielding Fabric.

Project description:A unique self-standing membrane composed of hierarchical thermoplastic polyurethane (TPU)/polyacrylonitrile (PAN) fibers is prepared by the electrospinning technique, followed by a simple dip-coating process. Fe3O4 nanoparticles are uniformly anchored on TPU/PAN fibers during the electrospinning process, enabling the membrane to achieve effective electromagnetic interference shielding (EMI SE) performance. Such a hybrid membrane has a high magnetization of 18.9 emu/g. When MXene (Ti3C2Tx) layers are further loaded on the TPU/PAN/Fe3O4NPs hybrid membrane, its EMI SE performance in the X band can exceed 30 dB due to the hydrogen bonds generated between the macromolecular chain of PAN and the functional group (Tx) on the surface of MXene. Simultaneously, the interfacial attraction between MXene and the TPU/PAN/Fe3O4NPs substrate is enhanced. The EMI SE mechanism of the hybrid membrane indicates that this film has great potential in the fields of wearable devices and flexible materials.

| S-EPMC8746703 | biostudies-literature

Water Influence on the Uniaxial Tensile Behavior of Polytetrafluoroethylene-Coated Glass Fiber Fabric.

Project description:Polytetrafluoroethylene (PTFE)-coated glass fiber fabrics are used for long-lasting membrane structures due to their outstanding mechanical properties, chemical stabilities, and satisfying service life. During their operation time, different environmental impacts might influence their performance, especially regarding the mechanical properties. In this contribution, the impact of water on the tensile strength deterioration was assessed experimentally, providing evidence of considerable but partially reversible loss of strength by up to 20% among the various types of investigated industrially established fabrics.

| S-EPMC7916629 | biostudies-literature

Evaluation of Micro- and Nano-Bismuth(III) Oxide Coated Fabric for Environmentally Friendly X-Ray Shielding Materials.

Project description:This research focuses on the development of environmentally friendly textile-based shielding composites, from micro-sized and nanosized Bi2O3 particles, against ionizing radiation. Polyester fabric dyne-coated with either micro- or nano-Bi2O3 particles shields some X-rays but the effectiveness is poor. With only ∼58% uptake of micro-sized Bi2O3 particles dyeing on polyester fabric, the insufficient amount of Bi2O3 leaded to the low density of particles, resulting in only 30% of X-ray shielding at 80 kVp. Cotton fabric coated with either micro- or nano-Bi2O3/poly(vinyl alcohol) (PVA) composites, on the other hand, demonstrated the capacity to attenuate X-ray generated by high diagnostic X-ray tube voltages of 70-100 kVp, in compliance with medical protection requirements. The X-ray attenuation performance of cotton fabric coated with either micro-Bi2O3/PVA or nano-Bi2O3/PVA nanocomposite decreased progressively with increasing tube acceleration voltages, however their ionizing radiation-shielding performance enhanced with the number of fabric layers. Interestingly, for all X-ray tube voltages evaluated, the micro-Bi2O3/PVA composite outperformed the nano- Bi2O3/PVA composite in terms of X-ray shielding. At a weight ratio of 66.7% Bi2O3, 10 layers of cotton fabric coated with micro- Bi2O3/PVA composite can attenuate 90, 85, and 80% of X-ray photons at 70, 80, and 100 kVp, respectively. As a result, these less harmful X-ray shielding materials have the potential to replace lead-based composites, which are highly toxic to human health and have negative environmental consequences.

| S-EPMC9386847 | biostudies-literature

EMI Shielding Nanocomposite Laminates with High Temperature Resistance, Hydrophobicity and Anticorrosion Properties.

Project description:High-performance multifunctional EMI shielding composite fabricated by low-cost method is increasingly required. Herein, novel EMI shielding nanocomposite laminates, consisting of composite prepreg of carbon fiber/epoxy resin/carbon nanotube film, were manufactured by facile electric heating of carbon nanotube film. The results indicated that composite with excellent specific shielding effectiveness of 0.07 dB/μm, 47 dB cm3/g and metamaterial properties can be designed by composite prepreg, and the primary shielding mechanism of it was reflection loss, along with interface polarization loss and conductive loss, which was superior to lots of shielding materials including carbon nanotube-based, carbon black-based, carbon nanofiber-based and graphene-based materials reported previously. Meanwhile, highly required excellent properties, including the thermostability with initial decomposition temperature up to 300 °C, hydrophobicity over contact angle of 115°, corrosion resistance of the composite with metal-free modification, and function as structural laminate compared with previous studies were demonstrated, which suggested tremendous potentials of the multifunctional EMI shielding composites in harsh environment.

| S-EPMC8621499 | biostudies-literature

Superior quality chemically reduced graphene oxide for high performance EMI shielding materials.

Project description:The chemical reduction process of graphene oxide combined with a mild and controllable thermal treatment under vacuum at 200 °C for 4 hours provided a cost-effective, scalable, and high-yield route for Reduced Graphene Oxide (RGO) industrial production and became a potential candidate for producing electromagnetic interference (EMI) shielding. We investigated graphite, and RGO using l-ascorbic acid and Sodium borohydride before and after thermal treatment by carefully evaluating the chemical and morphological structures. The thermally treated l-ascorbic Acid reduction route (TCRGOL) conductivity was 2.14 × 103 S m-1 and total shielding efficiency (SET) based on mass loadings per area of shielding was 94 dB with about one-tenth less graphite weight and surpassing other graphene reduction mechanisms in the frequency range of 8.2-12.4 GHz, i.e., X-band, at room temperature while being tested using the waveguide line technique. The developed treatment represents valuable progress in the path to chemical reduction using a safe reducing agent and offering superior quality RGO rarely achieved with the top-down technique, providing a high EMI shielding performance.

| S-EPMC9372871 | biostudies-literature

Lecturers' readiness for EMI in Malaysia higher education.

Project description:The current study aims to examine lecturer readiness for English Medium Instruction (EMI) in higher educational institutions and the contextual influences of gender, age, academic qualification, teaching experience, EMI course teaching involvement, and EMI training. A quantitative research design was employed, and a survey questionnaire was completed by 227 lecturers (out of 250 invited participants) from private universities in Klang Valley, Malaysia to gauge self-ratings of personal knowledge, skills, abilities, and attitudes in educating EMI courses. The collected data were subsequently analysed via the Statistical Package for Social Sciences (SPSS) version 27.0 software before revealing the findings from the inferential statistics of the t-test and one-way analysis of variance (ANOVA) on lecturers' gender, age, academic qualification, teaching experience, EMI course teaching involvement, and EMI training. Resultantly, the important role of lecturers' knowledge, understanding, skills, abilities, and attitudes was highlighted to further enhance intercultural communicative competence in managing the increasingly diversified student body in EMI classrooms.

| S-EPMC10370753 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data