Dataset Information

The Osteogenic and Tenogenic Differentiation Potential of C3H10T1/2 (Mesenchymal Stem Cell Model) Cultured on PCL/PLA Electrospun Scaffolds in the Absence of Specific Differentiation Medium.

ABSTRACT: The differentiation potential of mesenchymal stem cells (MSC) has been extensively tested on electrospun scaffolds. However, this potential is often assessed with lineage-specific medium, making it difficult to interpret the real contribution of the properties of the scaffold in the cell response. In this study, we analyzed the ability of different polycaprolactone/polylactic acid PCL/PLA electrospun scaffolds (pure or blended compositions, random or aligned fibers, various fiber diameters) to drive MSC towards bone or tendon lineages in the absence of specific differentiation medium. C3H10T1/2 cells (a mesenchymal stem cell model) were cultured on scaffolds for 96 h without differentiation factors. We performed a cross-analysis of the cell-scaffold interactions (spreading, organization, and specific gene expression) with mechanical (elasticity), morphological (porosity, fibers diameter and orientation) and surface (wettability) characterizations of the electrospun fibers. We concluded that (1) osteogenic differentiation can be initiated on pure PCL-based electrospun scaffolds without specific culture conditions; (2) fiber alignment modified cell organization in the short term and (3) PLA added to PCL with an increased fiber diameter encouraged the stem cells towards the tendon lineage without additional tenogenic factors. In summary, the differentiation potential of stem cells on adapted electrospun fibers could be achieved in factor-free medium, making possible future applications in clinically relevant situations.

SUBMITTER: Baudequin T

PROVIDER: S-EPMC5744322 | biostudies-literature | 2017 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

The Osteogenic and Tenogenic Differentiation Potential of C3H10T1/2 (Mesenchymal Stem Cell Model) Cultured on PCL/PLA Electrospun Scaffolds in the Absence of Specific Differentiation Medium.

Baudequin Timothée T Gaut Ludovic L Mueller Marc M Huepkes Angela A Glasmacher Birgit B Duprez Delphine D Bedoui Fahmi F Legallais Cécile C

Materials (Basel, Switzerland) 20171204 12

The differentiation potential of mesenchymal stem cells (MSC) has been extensively tested on electrospun scaffolds. However, this potential is often assessed with lineage-specific medium, making it difficult to interpret the real contribution of the properties of the scaffold in the cell response. In this study, we analyzed the ability of different polycaprolactone/polylactic acid PCL/PLA electrospun scaffolds (pure or blended compositions, random or aligned fibers, various fiber diameters) to d ...[more]

PMID: 29207566

Similar Datasets

Project description:With advances in bone tissue engineering, various materials and methods have been explored to find a better scaffold that can help in improving bone growth and regeneration. Three-dimensional (3D) printing by fused deposition modeling can produce customized scaffolds from biodegradable polyesters such as polycaprolactone (PCL). Although the fabricated PCL scaffolds exhibited a lack of bioactivity and poor cell attachment on their surfaces, herein, using a simple postfabrication modification method with hydroxyapatite (HA) and bioglasses (BGs), we obtained better cell proliferation and attachment. Biological behavior and osteosupportive capacity of the 3D-printed scaffolds including PCL, PCL/HA, PCL/BG, and PCL/HA/BG were evaluated in this study, while human adipose tissue-derived mesenchymal stem cells (hADSCs) were cultured on the scaffolds. The cell morphology, attachment, and proliferation were investigated using scanning electron microscopy (SEM), 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay, and 4',6-diamidino-2-phenylindole (DAPI) staining. In the next step, the ability of stem cells to differentiate into osteoblasts was evaluated by measuring alkaline phosphatase (ALP) activity, calcium deposition, and bone-related gene and protein expression. In the end, the expression levels of miR-20a, miR-125a, and their target genes were also investigated as positive and negative regulators in osteogenesis pathways. The results showed that the coated scaffolds with bioceramics present a more appropriate surface for cell adhesion and proliferation, as well as efficient potential in inducing osteoconduction and osteointegration compared to PCL alone and control. The PCL/HA/BG scaffold exhibited higher in vitro cell viability and bone formation compared to the other groups, which can be due to the synergistic effect of HA and BG. On the whole, this tricomponent 3D-printing scaffold has a promising prospect for bone tissue engineering applications.

Project description:The determination of potential transplantable substrates and substitution cells for corneal endothelium transplantation may compensate for the shortage of cornea donors. Appropriate biodegradable and biocompatible tissue-engineered substratum with seed cells for endothelial keratoplasty has been increasingly studied. In the present study, electrospun gelatin/polycaprolactone (PCL) and collagen/PCL scaffolds were successfully established. Bone marrow endothelial progenitor cells (BEPCs) were cultured on these scaffolds to determine whether the scaffolds may promote the proliferation of BEPCs as well as maintain stem cell characteristics. Two variations of hybrid scaffolds, collagen/PCL (70% collagen and 30% PCL) and gelatin/PCL (70% gelatin and 30% PCL), were established via electrospinning. Microscopic structure, hydrophilicity and wettability of the two scaffolds were subsequently investigated. BEPCs were separately cultured on the scaffolds and were also seeded on glass slides to establish the control group. Furthermore, cell morphology; adherence, as determined by investigation of F-actin expression levels; proliferation, as determined via Cell Counting Kit-8 assays, Ki-67 staining and bromodeoxyuridine (BrdU) staining; and stem cell markers, as determined by cluster of differentiation (CD)-34 and CD-133 protein expression levels; were investigated. In addition, reverse transcription-quantitative polymerase chain reaction (RT-qPCR) was performed to determine gene expression. The two nanofiber scaffolds were established using electrospun techniques with expected hydrophilicity, wettability and biocompatibility. BEPCs were revealed to spread well on and strongly adhere to the collagen/PCL (70:30) and gelatin/PCL (70:30) scaffolds. Furthermore, Ki-67 and BrdU staining results revealed greater levels of positive dots on the two hybrid scaffolds compared with the control group. CD-34 and CD-133 protein staining demonstrated increased levels of fluorescence intensity on scaffolds compared with the control group. Furthermore, increased expression levels of differentiation markers, such as ATP binding cassette subfamily G member 2, leucine rich repeat containing G protein-coupled receptor 5 and CD166, were detected on both scaffolds. RT-qPCR results demonstrated that the expression of caspase-3, which is associated with apoptosis, was decreased on the two scaffolds compared with in the control group. The expression of inflammatory factors, including interleukin (IL)-1, exhibited a significant decrease on the gelatin/PCL scaffold compared with in the control group; whereas the difference between the expression level of IL-1 exhibited by the collagen/PCL group and the control group were not markedly different. Electrospun collagen/PCL and gelatin/PCL scaffolds exhibited the potential to enhance the adherence and proliferation of BEPCs. BEPCs cultured on the two scaffolds demonstrated increased stem cell characteristics and differentiation potential. Electrospun gelatin/PCL and collagen/PCL scaffolds may represent a promising substratum in tissue-engineered corneal endothelium.

Project description:Craniomaxillofacial bone defects can occur as a result of congenital, post-oncologic, and high-energy impact conditions. The scale and irregularity of such defects motivate new biomaterials to promote regeneration of the damaged bone. We have recently described a mineralized collagen scaffold capable of instructing stem cell osteogenic differentiation and new bone infill in the absence of traditional osteogenic supplements. Herein, we report the integration of a millimeter-scale reinforcing poly (lactic acid) frame fabricated via 3D-printing into the mineralized collagen scaffold with micron-scale porosity to form a multi-scale mineralized collagen-PLA composite. We describe modifications to the PLA frame design to increase the compressive strength (Young's Modulus, ultimate stress and strain) of the composite. A critical challenge beyond increasing the compressive strength of the collagen scaffold is addressing challenges inherent with the irregularity of clinical defects. As a result, we examined the potential for modifying the frame architecture to render the composite with increased compressive strength in one axis or radial compressibility and shape-fitting capacity in an orthogonal axis. A library of mineralized collagen-PLA composites was mechanically characterized via compression testing and push-out test to describe mechanical performance and shape-fitting capacity. We also report in vitro comparison of the bioactivity of porcine adipose derived stem cells in the mineralized collagen-PLA composite versus the mineralized collagen scaffold via metabolic activity, gene expression, and functional matrix synthesis. The results suggest that incorporation of the PLA reinforcing frame does not negatively influence the osteoinductive nature of the mineralized collagen scaffold. Together, these findings suggest a strategy to address often competing bioactivity, mechanical strength, and shape-fitting design requirements for biomaterials for craniomaxillofacial bone regeneration.

Dataset Information

The Osteogenic and Tenogenic Differentiation Potential of C3H10T1/2 (Mesenchymal Stem Cell Model) Cultured on PCL/PLA Electrospun Scaffolds in the Absence of Specific Differentiation Medium.

Publications

The Osteogenic and Tenogenic Differentiation Potential of C3H10T1/2 (Mesenchymal Stem Cell Model) Cultured on PCL/PLA Electrospun Scaffolds in the Absence of Specific Differentiation Medium.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets