Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Excellent room temperature deformability in high strain rate regimes of magnesium alloy.

ABSTRACT: Magnesium and its alloys have the lowest density among structural metallic materials; thus, this light-weight metal has great potential for reducing the weight, for example, of vehicles and trains. However, due to its crystal structure, deformability is poor; in particular, under compressive stress. In this study, we modified magnesium with bismuth as an alloying element, which has the characteristics of being likely to form precipitates instead of grain boundary segregation. The Mg-Bi binary alloy showed excellent deformability and high absorption of energy in high-strain rate regimes at room temperature via contribution of grain boundary sliding. These properties, which are closely comparable to those of conventional middle-strength aluminum alloys (Al-Mg and Al-Mg-Si series alloys), have never been observed before in magnesium alloys. The development of such properties opens the door for not only academic but also industrial research in magnesium.

SUBMITTER: Somekawa H

PROVIDER: S-EPMC5766617 | biostudies-literature | 2018 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Excellent room temperature deformability in high strain rate regimes of magnesium alloy.

Somekawa Hidetoshi H Singh Alok A Sahara Ryoji R Inoue Tadanobu T

Scientific reports 20180112 1

Magnesium and its alloys have the lowest density among structural metallic materials; thus, this light-weight metal has great potential for reducing the weight, for example, of vehicles and trains. However, due to its crystal structure, deformability is poor; in particular, under compressive stress. In this study, we modified magnesium with bismuth as an alloying element, which has the characteristics of being likely to form precipitates instead of grain boundary segregation. The Mg-Bi binary al ...[more]

PMID: 29330549

Similar Datasets

Room-Temperature Superplasticity in an Ultrafine-Grained Magnesium Alloy.

Project description:Superplasticity, a phenomenon of high tensile elongation in polycrystalline materials, is highly effective in fabrication of complex parts by metal forming without any machining. Superplasticity typically occurs only at elevated homologous temperatures, where thermally-activated deformation mechanisms dominate. Here, we report the first observation of room-temperature superplasticity in a magnesium alloy, which challenges the commonly-held view of the poor room-temperature plasticity of magnesium alloys. An ultrafine-grained magnesium-lithium (Mg-8 wt.%Li) alloy produced by severe plastic deformation demonstrated 440% elongation at room temperature (0.35 T m) with a strain-rate sensitivity of 0.37. These unique properties were associated with enhanced grain-boundary sliding, which was approximately 60% of the total elongation. This enhancement originates from fast grain-boundary diffusion caused by the Li segregation along the grain boundaries and the formation of Li-rich interphases. This discovery introduces a new approach for controlling the room-temperature superplasticity by engineering grain-boundary composition and diffusion, which is of importance in metal forming technology without heating.

| S-EPMC5453936 | biostudies-literature

Effects of strain rate on room- and cryogenic-temperature compressive properties in metastable V10Cr10Fe45Co35 high-entropy alloy.

Project description:Quasi-static and dynamic compressive properties of an FCC-based metastable HEA (composition; V10Cr10Fe45Co35 (at.%)) showing both Transformation Induced Plasticity (TRIP) and TWinning Induced Plasticity (TWIP) were investigated at room and cryogenic temperatures. During the quasi-static and dynamic compression at room temperature, the FCC to BCC TRIP occurred inside FCC grains, and resulted in very high strain-hardening rate and consequently maximum compressive strength over 1.6 GPa. The dynamic compressive strength was higher by 240 MPa than the quasi-static strength because of strain-rate-hardening effect, and kept increasing with a high strain-hardening rate as the twinning became activated. The cryogenic-temperature strength was higher than the room-temperature strength as the FCC to BCC TRIP amount increased by the decrease in stability of FCC phase with decreasing temperature. Under dynamic loading at cryogenic temperature, twins were not formed because the increase in SFE due to adiabatic heating might not be enough to reach the TWIP regime. However, the dynamically compressed specimen showed the higher strength than the quasi-statically compressed specimen as the strain-rate-hardening effect was added with the TRIP.

| S-EPMC6467881 | biostudies-literature

Ultrahigh high-strain-rate superplasticity in a nanostructured high-entropy alloy.

Project description:Superplasticity describes a material's ability to sustain large plastic deformation in the form of a tensile elongation to over 400% of its original length, but is generally observed only at a low strain rate (~10-4 s-1), which results in long processing times that are economically undesirable for mass production. Superplasticity at high strain rates in excess of 10-2 s-1, required for viable industry-scale application, has usually only been achieved in low-strength aluminium and magnesium alloys. Here, we present a superplastic elongation to 2000% of the original length at a high strain rate of 5 × 10-2 s-1 in an Al9(CoCrFeMnNi)91 (at%) high-entropy alloy nanostructured using high-pressure torsion. The high-pressure torsion induced grain refinement in the multi-phase alloy combined with limited grain growth during hot plastic deformation enables high strain rate superplasticity through grain boundary sliding accommodated by dislocation activity.

| S-EPMC7264233 | biostudies-literature

Imprinting bulk amorphous alloy at room temperature.

Project description:We present investigations on the plastic deformation behavior of a brittle bulk amorphous alloy by simple uniaxial compressive loading at room temperature. A patterning is possible by cold-plastic forming of the typically brittle Hf-based bulk amorphous alloy through controlling homogenous flow without the need for thermal energy or shaping at elevated temperatures. The experimental evidence suggests that there is an inconsistency between macroscopic plasticity and deformability of an amorphous alloy. Moreover, imprinting of specific geometrical features on Cu foil and Zr-based metallic glass is represented by using the patterned bulk amorphous alloy as a die. These results demonstrate the ability of amorphous alloys or metallic glasses to precisely replicate patterning features onto both conventional metals and the other amorphous alloys. Our work presents an avenue for avoiding the embrittlement of amorphous alloys associated with thermoplastic forming and yields new insight the forming application of bulk amorphous alloys at room temperature without using heat treatment.

| S-EPMC4643295 | biostudies-literature

Excellent age hardenability with the controllable microstructure of AXW100 magnesium sheet alloy.

Project description:Age-hardenability and corresponding improvement of the mechanical properties of Mg-1Al-0.7Ca and Mg-1Al-0.7Ca-0.7Y alloy sheets are addressed with respect to the microstructure and texture evolution during thermomechanical treatments. A fine grain structure and weak texture with the basal pole split into the sheet transverse direction are retained in the Mg-1Al-0.7Ca-0.7Y sheet even after the homogenization at 500 °C, due to the grain boundary pinning by Y-containing precipitates possessing a high thermal stability. Contrarily, the Mg-1Al-0.7Ca sheet shows a coarse microstructure and basal-type texture after the homogenization. The peak-aged condition is attained after the aging at 250 °C for 1800 s of both homogenized sheets, while the Y-containing sheet shows a higher hardness than the Mg-1Al-0.7Ca sheet. TEM analysis and thermodynamic calculation show the formation of metastable precipitates composed of Al, Ca, Y and Mg in the Mg-1Al-0.7Ca-0.7Y sheet at the homogenized and peak-aged conditions. A significant increase in the yield strength is obtained in the peak-aged condition from 162 MPa after the homogenization to 244 MPa, which arises from the increased size and number density of the precipitates. The high age-hardenability of the Mg-1Al-0.7Ca-0.7Y sheet attributes to the superior mechanical properties with an improved ductility promoted by the weak texture.

| S-EPMC7772342 | biostudies-literature

Super-formable pure magnesium at room temperature.

Project description:Magnesium, the lightest structural metal, is difficult to form at room temperature due to an insufficient number of deformation modes imposed by its hexagonal structure and a strong texture developed during thermomechanical processes. Although appropriate alloying additions can weaken the texture, formability improvement is limited because alloying additions do not fundamentally alter deformation modes. Here we show that magnesium can become super-formable at room temperature without alloying. Despite possessing a strong texture, magnesium can be cold rolled to a strain at least eight times that possible in conventional processing. The resultant cold-rolled sheet can be further formed without cracking due to grain size reduction to the order of one micron and inter-granular mechanisms becoming dominant, rather than the usual slip and twinning. These findings provide a pathway for developing highly formable products from magnesium and other hexagonal metals that are traditionally difficult to form at room temperature.Replacing steel or aluminium vehicle parts with magnesium would result in reduced emissions, but shaping magnesium without cracking remains challenging. Here, the authors successfully extrude and roll textured magnesium into ductile foil at low temperatures by activating intra-granular mechanisms.

| S-EPMC5715137 | biostudies-literature

Room-Temperature-Stable Magnesium Electride via Ni(II) Reduction.

Project description:Herein, we report the synthesis of highly reduced bipyridyl magnesium complexes and the first example of a stable organic magnesium electride supported by quantum mechanical computations and X-ray diffraction. These complexes serve as unconventional homogeneous reductants due to their high solubility, modular redox potentials, and formation of insoluble, non-coordinating byproducts. The applicability of these reductants is showcased by accessing low-valent (bipy)2Ni(0) species that are challenging to access otherwise.

| S-EPMC9345648 | biostudies-literature

Lyophilized human cells stored at room temperature preserve multiple RNA species at excellent quality for RNA sequencing

Project description:Purpose: We aimed to examine whether eukaryotic cell lyophilization and long-term storage would be feasible as an environmentally friendly and cheap alternative to cryogenic storage or the use of FFPE samples for large-scale RNA profiling studies. Brief method: On three different days three million GM12873 cells were taken up in 0.1 M trehalose, subjected to lyophilization (freeze-drying) and then stored for two weeks at room temperature in the presence of CaCl2 in a dark, tightly sealed box. Fresh paired control cells were pelleted and taken up in trizol without lyophilization. Total RNA was isolated using a modified trizol method, quantified and subjected to mRNA-Seq library preparation. Samples were sequenced using a NextSeq 500 instrument to 75 bp (single-end). Raw reads were aligned to the hg19 genomic build with TopHat 2.0.7 and gene expression quantification was performed using Cufflinks. Results: We found that lyophilized cells are highly similar in all inferred RNA-Seq quality metrics compared to their non-lyophilized controls and are useful sources of high-quality RNA for both small and large-scale studies. Conslusion: Lyophilization might be the preservation technique of choice in the future for studies aiming to involve large sample sets, such as clinical studies.

2018-08-13 | GSE106344 | GEO

Designing a magnesium alloy with high strength and high formability.

Project description:Although magnesium alloys, as the lightest structural alloys, offer significant potential for automotive applications, their applications remain limited due to their poor formability at room temperature. Since the strategies used for improving formability usually result in a degradation of strength, there are no high strength magnesium alloys showing good formability. Here we report an alloy design concept that can simultaneously provide high strength and good formability. Such designed alloy when subjected to an appropriate processing technique shows a combination of strength and formability that surpasses those of the existing magnesium alloys reported so far. The alloy design concept used in the present study is based on the utilization of alloying elements that can induce precipitation, as well as maximize the segregation of other texture-controlling alloying elements. Such developed alloy is expected to broaden the application of Mg alloy sheets, which are now starting to gain acceptance by automotive industries.

| S-EPMC6023917 | biostudies-literature

Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy.

Project description:The excellent cryogenic tensile properties of the CrMnFeCoNi alloy are generally caused by deformation twinning, which is difficult to achieve at room temperature because of insufficient stress for twinning. Here, we induced twinning at room temperature to improve the cryogenic tensile properties of the CrMnFeCoNi alloy. Considering grain size effects on the critical stress for twinning, twins were readily formed in the coarse microstructure by cold rolling without grain refinement by hot rolling. These twins were retained by partial recrystallization and played an important role in improving strength, allowing yield strengths approaching 1?GPa. The persistent elongation up to 46% as well as the tensile strength of 1.3?GPa are attributed to additional twinning in both recrystallized and non-recrystallization regions. Our results demonstrate that non-recrystallized grains, which are generally avoided in conventional alloys because of their deleterious effect on ductility, can be useful in achieving high-strength high-entropy alloys.

| S-EPMC5494191 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data