Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Graphene-based bimorphs for micron-sized, autonomous origami machines.

ABSTRACT: Origami-inspired fabrication presents an attractive platform for miniaturizing machines: thinner layers of folding material lead to smaller devices, provided that key functional aspects, such as conductivity, stiffness, and flexibility, are persevered. Here, we show origami fabrication at its ultimate limit by using 2D atomic membranes as a folding material. As a prototype, we bond graphene sheets to nanometer-thick layers of glass to make ultrathin bimorph actuators that bend to micrometer radii of curvature in response to small strain differentials. These strains are two orders of magnitude lower than the fracture threshold for the device, thus maintaining conductivity across the structure. By patterning 2-[Formula: see text]m-thick rigid panels on top of bimorphs, we localize bending to the unpatterned regions to produce folds. Although the graphene bimorphs are only nanometers thick, they can lift these panels, the weight equivalent of a 500-nm-thick silicon chip. Using panels and bimorphs, we can scale down existing origami patterns to produce a wide range of machines. These machines change shape in fractions of a second when crossing a tunable pH threshold, showing that they sense their environments, respond, and perform useful functions on time and length scales comparable with microscale biological organisms. With the incorporation of electronic, photonic, and chemical payloads, these basic elements will become a powerful platform for robotics at the micrometer scale.

SUBMITTER: Miskin MZ

PROVIDER: S-EPMC5776973 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

DNA Origami "Quick" Refolding Inside of a Micron-Sized Compartment.

Project description:Investigations into the refolding of DNA origami leads to the creation of reconstructable nanostructures and deepens our understanding of the sustainability of life. Here, we report the refolding of the DNA origami structure inside a micron-sized compartment. In our experiments, conventional DNA origami and truss-type DNA origami were annealed and purified to remove the excess staples in a test tube. The DNA origami was then encapsulated inside of a micron-sized compartment of water-in-oil droplets, composed of neutral surfactants. The re-annealing process was then performed to initiate refolding in the compartment. The resulting 100-nm-sized DNA nanostructures were observed using atomic force microscopy (AFM), and the qualities of their structures were evaluated based on their shape. We found that the refolding of the DNA origami structure was favored inside the droplets compared with refolding in bulk solution. The refolded structures were able to fold even under "quick" one-minute annealing conditions. In addition, the smaller droplets (average diameter: 1.2 µm) appeared to be more advantageous for the refolding of the origamis than larger droplets. These results are expected to contribute to understanding the principles of life phenomena based on multimolecular polymer self-assembly in a micron-sized compartment, and for the production and maintenance of artificially designed molecules.

| S-EPMC6983259 | biostudies-literature

Intelligent, Autonomous Machines in Surgery.

Project description:Surgeons perform two primary tasks: operating and engaging patients and caregivers in shared decision-making. Human dexterity and decision-making are biologically limited. Intelligent, autonomous machines have the potential to augment or replace surgeons. Rather than regarding this possibility with denial, ire, or indifference, surgeons should understand and steer these technologies. Closer examination of surgical innovations and lessons learned from the automotive industry can inform this process. Innovations in minimally invasive surgery and surgical decision-making follow classic S-shaped curves with three phases: (1) introduction of a new technology, (2) achievement of a performance advantage relative to existing standards, and (3) arrival at a performance plateau, followed by replacement with an innovation featuring greater machine autonomy and less human influence. There is currently no level I evidence demonstrating improved patient outcomes using intelligent, autonomous machines for performing operations or surgical decision-making tasks. History suggests that if such evidence emerges and if the machines are cost effective, then they will augment or replace humans, initially for simple, common, rote tasks under close human supervision and later for complex tasks with minimal human supervision. This process poses ethical challenges in assigning liability for errors, matching decisions to patient values, and displacing human workers, but may allow surgeons to spend less time gathering and analyzing data and more time interacting with patients and tending to urgent, critical-and potentially more valuable-aspects of patient care. Surgeons should steer these technologies toward optimal patient care and net social benefit using the uniquely human traits of creativity, altruism, and moral deliberation.

| S-EPMC7594619 | biostudies-literature

High-throughput fabrication of soft magneto-origami machines.

Project description:Soft magneto-active machines capable of magnetically controllable shape-morphing and locomotion have diverse promising applications such as untethered biomedical robots. However, existing soft magneto-active machines often have simple structures with limited functionalities and do not grant high-throughput production due to the convoluted fabrication technology. Here, we propose a facile fabrication strategy that transforms 2D magnetic sheets into 3D soft magneto-active machines with customized geometries by incorporating origami folding. Based on automated roll-to-roll processing, this approach allows for the high-throughput fabrication of soft magneto-origami machines with a variety of characteristics, including large-magnitude deploying, sequential folding into predesigned shapes, and multivariant actuation modes (e.g., contraction, bending, rotation, and rolling locomotion). We leverage these abilities to demonstrate a few potential applications: an electronic robot capable of on-demand deploying and wireless charging, a mechanical 8-3 encoder, a quadruped robot for cargo-release tasks, and a magneto-origami arts/craft. Our work contributes for the high-throughput fabrication of soft magneto-active machines with multi-functionalities.

| S-EPMC9296529 | biostudies-literature

Unlocking the energy capabilities of micron-sized LiFePO4.

Project description:Utilization of LiFePO4 as a cathode material for Li-ion batteries often requires size nanonization coupled with calcination-based carbon coating to improve its electrochemical performance, which, however, is usually at the expense of tap density and may be environmentally problematic. Here we report the utilization of micron-sized LiFePO4, which has a higher tap density than its nano-sized siblings, by forming a conducting polymer coating on its surface with a greener diazonium chemistry. Specifically, micron-sized LiFePO4 particles have been uniformly coated with a thin polyphenylene film via the spontaneous reaction between LiFePO4 and an aromatic diazonium salt of benzenediazonium tetrafluoroborate. The coated micron-sized LiFePO4, compared with its pristine counterpart, has shown improved electrical conductivity, high rate capability and excellent cyclability when used as a 'carbon additive free' cathode material for rechargeable Li-ion batteries. The bonding mechanism of polyphenylene to LiFePO4/FePO4 has been understood with density functional theory calculations.

| S-EPMC4532849 | biostudies-literature

Micron-Sized Pored Membranes Based on Polyvinylidene Difluoride Hexafluoropropylene Prepared by Phase Inversion Techniques.

Project description:In this study, micron-sized pored membranes, based on the co-polymer polyvinylidene difluoride hexafluoropropylene (PVdF-HFP) were prepared via phase inversion techniques. The aim of the approach was to find less harmful and less toxic solvents to fabricate such films. Therefore, the Hansen solubility approach was used to identify safer and less toxic organic solvents for the phase inversion process, relative to present solvent mixtures, based on acetone, dimethyl formamide, dimethyl acetamide or methanol. With this approach, it was possible to identify cyclopentanone, ethylene glycol and benzyl alcohol as suitable solvents for the membrane preparation process. Physicochemical and mechanical properties were analyzed and compared, which revealed a uniform membrane structure through the cross section. Differences were observed at the top surface, in dependence of both preparation approaches, which are described in detail.

| S-EPMC6418560 | biostudies-literature

The roles of lithium-philic giant nitrogen-doped graphene in protecting micron-sized silicon anode from fading.

Project description:A stable Si-based anode with a high initial coulombic efficiency (ICE) for lithium-ion batteries (LIB) is critical for energy storage. In the present paper, a new scalable method is adopted in combination with giant nitrogen-doped graphene and micron-size electrode materials. We first synthesize a new type of freestanding LIB anode composed of micron-sized Si (mSi) particles wrapped by giant nitrogen-doped graphene (mSi@GNG) film. High ICE (>85%) and long cycle life (more than 80 cycles) are obtained. In the mSi@GNG composite, preferential formation of a stable solid electrolyte interphase (SEI) on the surface of graphene sheets is achieved. The formation and components of SEI are identified for the first time by using UV-resonance Raman spectroscopy and Raman mapping, which will revive the study of formation and evolution of SEI by Raman. New mechanism is proposed that the giant graphene sheets protect the mSi particles from over-lithiation and fracture. Such a simple and scalable method may also be applied to other anode systems to boost their energy and power densities for LIB.

| S-EPMC4620504 | biostudies-other

Micron-sized single-crystal cathodes for sodium-ion batteries.

Project description:Confining the particle-electrolyte interactions to the particle surface in electrode materials is vital to develop sustainable and safe batteries. Micron-sized single-crystal particles offer such opportunities. Owing to the reduced surface area and grain boundary-free core, particle-electrolyte interactions in micron-sized single-crystal particles will be confined to the particle surface. Here, we reveal the potential of such materials in sodium-ion batteries. We synthesized and investigated the chemical, electrochemical, and thermal properties of single-crystalline P2-type Na0.7Mn0.9Mg0.1O2 as a cathode material for sodium-ion batteries. Single-crystalline Na0.7Mn0.9Mg0.1O2 with a mean particle size of 8.1 μm exhibited high cycling and voltage stability. In addition, the exothermic heat released by the charged single-crystal Na0.7Mn0.9Mg0.1O2 cathodes was four times lower than that of the corresponding polycrystalline Na0.7Mn0.9Mg0.1O2. This significantly enhances the thermal stability of electrode materials and possibly mitigates thermal runaways in batteries. Surprisingly, single crystals of Na0.7Mn0.9Mg0.1O2 were relatively stable in water and ambient atmosphere.

| S-EPMC9043968 | biostudies-literature

Integrated mechanical computing for autonomous soft machines.

Project description:Mechanical computing offers a new modality to formulate computational autonomy in intelligent matter or machines without any external powering or active elements. Transition (or solitary) waves, induced by nonreciprocity in mechanical metamaterials comprising a chain of bistable elements, have proven to be a key ingredient for dissipation-free transmission and computation of mechanical information. However, advanced processing of mechanical information in existing designs is hindered by its dissipation when interacting with networked logic gates. Here, we present a metamaterial design strategy that allows non-dispersive mechanical solitary waves to compute multi-level cascaded logic functions, termed 'integrated mechanical computing', by propagating through a network of structurally heterogeneous computing units. From a perspective of characteristic potential energy, we establish an analytical framework that helps in understanding the solitary wave-based mechanical computation, and governs the mechanical design of key determinants for realizing cascaded logic computation, such as soliton profile and logic elements. The developed integrated mechanical computing systems are shown to receive, transmit and compute mechanical information to actuate intelligent soft machine prototypes in a seamless and integrated manner. These findings would pave the way for future intelligent robots and machines that perform computational operations between various non-electrical environmental inputs.

| S-EPMC10995184 | biostudies-literature

Human Cooperation When Acting Through Autonomous Machines.

Project description:Recent times have seen an emergence of intelligent machines that act autonomously on our behalf, such as autonomous vehicles. Despite promises of increased efficiency, it is not clear whether this paradigm shift will change how we decide when our self-interest (e.g., comfort) is pitted against the collective interest (e.g., environment). Here we show that acting through machines changes the way people solve these social dilemmas and we present experimental evidence showing that participants program their autonomous vehicles to act more cooperatively than if they were driving themselves. We show that this happens because programming causes selfish short-term rewards to become less salient, leading to considerations of broader societal goals. We also show that the programmed behavior is influenced by past experience. Finally, we report evidence that the effect generalizes beyond the domain of autonomous vehicles. We discuss implications for designing autonomous machines that contribute to a more cooperative society.

| S-EPMC6397531 | biostudies-literature

Preparation of "Cauliflower-Like" ZnO Micron-Sized Particles.

Project description:Porous polydivinyl benzene (PDVB) microspheres of narrow size distribution were formed by a single-step swelling process of template uniform polystyrene microspheres with divinyl benzene (DVB), followed by polymerization of the DVB within the swollen template microspheres. The PDVB porous particles were then formed by dissolution of the template polystyrene polymer. Unique "cauliflower-like" ZnO microparticles were prepared by the entrapping of the ZnO precursor ZnCl₂ in the PDVB porous microspheres under vacuum, followed by calcination of the obtained ZnCl₂-PDVB microspheres in an air atmosphere. The morphology, crystallinity and fluorescence properties of those ZnO microparticles were characterized. This "cauliflower-like" shape ZnO particles is in contrast to a previous study demonstrated the preparation of spherical shaped porous ZnO and C-ZnO microparticles by a similar method, using zinc acetate (ZnAc) as a precursor. Two diverted synthesis mechanisms for those two different ZnO microparticles structures are proposed, based on studies of the distribution of each of the ZnO precursors within the PDVB microspheres.

| S-EPMC5452773 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data