Dataset Information

Micro 3D Printing of a Temperature-Responsive Hydrogel Using Projection Micro-Stereolithography.

ABSTRACT: Stimuli-responsive hydrogels exhibiting physical or chemical changes in response to environmental conditions have attracted growing attention for the past few decades. Poly(N-isopropylacrylamide) (PNIPAAm), a temperature responsive hydrogel, has been extensively studied in various fields of science and engineering. However, manufacturing of PNIPAAm has been heavily relying on conventional methods such as molding and lithography techniques that are inherently limited to a two-dimensional (2D) space. Here we report the three-dimensional (3D) printing of PNIPAAm using a high-resolution digital additive manufacturing technique, projection micro-stereolithography (P?SL). Control of the temperature dependent deformation of 3D printed PNIPAAm is achieved by controlling manufacturing process parameters as well as polymer resin composition. Also demonstrated is a sequential deformation of a 3D printed PNIPAAm structure by selective incorporation of ionic monomer that shifts the swelling transition temperature of PNIPAAm. This fast, high resolution, and scalable 3D printing method for stimuli-responsive hydrogels may enable many new applications in diverse areas, including flexible sensors and actuators, bio-medical devices, and tissue engineering.

SUBMITTER: Han D

PROVIDER: S-EPMC5792483 | biostudies-literature | 2018 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Micro 3D Printing of a Temperature-Responsive Hydrogel Using Projection Micro-Stereolithography.

Han Daehoon D Lu Zhaocheng Z Chester Shawn A SA Lee Howon H

Scientific reports 20180131 1

Stimuli-responsive hydrogels exhibiting physical or chemical changes in response to environmental conditions have attracted growing attention for the past few decades. Poly(N-isopropylacrylamide) (PNIPAAm), a temperature responsive hydrogel, has been extensively studied in various fields of science and engineering. However, manufacturing of PNIPAAm has been heavily relying on conventional methods such as molding and lithography techniques that are inherently limited to a two-dimensional (2D) spa ...[more]

PMID: 29386555

Similar Datasets

Project description:Digital Light Processing (DLP) stereolithography (SLA) as a high-resolution 3D printing process offers a low-cost alternative for prototyping of microfluidic geometries, compared to traditional clean-room and workshop-based methods. Here, we investigate DLP-SLA printing performance for the production of micro-chamber chip geometries suitable for Polymerase Chain Reaction (PCR), a key process in molecular diagnostics to amplify nucleic acid sequences. A DLP-SLA fabrication protocol for printed micro-chamber devices with monolithic micro-channels is developed and evaluated. Printed devices were post-processed with ultraviolet (UV) light and solvent baths to reduce PCR inhibiting residuals and further treated with silane coupling agents to passivate the surface, thereby limiting biomolecular adsorption occurences during the reaction. The printed devices were evaluated on a purpose-built infrared (IR) mediated PCR thermocycler. Amplification of 75 base pair long target sequences from genomic DNA templates on fluorosilane and glass modified chips produced amplicons consistent with the control reactions, unlike the non-silanized chips that produced faint or no amplicon. The results indicated good functionality of the IR thermocycler and good PCR compatibility of the printed and silanized SLA polymer. Based on the proposed methods, various microfluidic designs and ideas can be validated in-house at negligible costs without the requirement of tool manufacturing and workshop or clean-room access. Additionally, the versatile chemistry of 3D printing resins enables customised surface properties adding significant value to the printed prototypes. Considering the low setup and unit cost, design flexibility and flexible resin chemistries, DLP-SLA is anticipated to play a key role in future prototyping of microfluidics, particularly in the fields of research biology and molecular diagnostics. From a system point-of-view, the proposed method of thermocycling shows promise for portability and modular integration of funcitonalitites for diagnostic or research applications that utilize nucleic acid amplification technology.

Project description:In this work, a 3D printed biocompatible micro-optofluidic (MoF) device for two-phase flow monitoring is presented. Both an air-water bi-phase flow and a two-phase mixture composed of micrometric cells suspended on a liquid solution were successfully controlled and monitored through its use. To manufacture the MoF device, a highly innovative microprecision 3D printing technique was used named Projection Microstereolithography (PμSL) in combination with the use of a novel 3D printable photocurable resin suitable for biological and biomedical applications. The concentration monitoring of biological fluids relies on the absorption phenomenon. More precisely, the nature of the transmission of the light strictly depends on the cell concentration: the higher the cell concentration, the lower the optical acquired signal. To achieve this, the microfluidic T-junction device was designed with two micrometric slots for the optical fibers' insertion, needed to acquire the light signal. In fact, both the micro-optical and the microfluidic components were integrated within the developed device. To assess the suitability of the selected biocompatible transparent resin for optical detection relying on the selected working principle (absorption phenomenon), a comparison between a two-phase flow process detected inside a previously fully characterized micro-optofluidic device made of a nonbiocompatible high-performance resin (HTL resin) and the same made of the biocompatible one (BIO resin) was carried out. In this way, it was possible to highlight the main differences between the two different resin grades, which were further justified with proper chemical analysis of the used resins and their hydrophilic/hydrophobic nature via static water contact angle measurements. A wide experimental campaign was performed for the biocompatible device manufactured through the PμSL technique in different operative conditions, i.e., different concentrations of eukaryotic yeast cells of Saccharomyces cerevisiae (with a diameter of 5 μm) suspended on a PBS (phosphate-buffered saline) solution. The performed analyses revealed that the selected photocurable transparent biocompatible resin for the manufactured device can be used for cell concentration monitoring by using ad hoc 3D printed micro-optofluidic devices. In fact, by means of an optical detection system and using the optimized operating conditions, i.e., the optimal values of the flow rate FR=0.1 mL/min and laser input power P∈{1,3} mW, we were able to discriminate between biological fluids with different concentrations of suspended cells with a robust working ability R2=0.9874 and Radj2=0.9811.

Dataset Information

Micro 3D Printing of a Temperature-Responsive Hydrogel Using Projection Micro-Stereolithography.

Publications

Micro 3D Printing of a Temperature-Responsive Hydrogel Using Projection Micro-Stereolithography.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets